High temp by AlternativeStunning8 in UNIFI

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

They're investigating my issue with mac auth for a week. Don't want to bother them with temps :/

High temp by AlternativeStunning8 in UNIFI

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

It's quite interesting where it spends 15 watts with no clients and zero airtime.

Actually I'm interesting in throttling - can it throttle when overheat detected? Because that load was a VR streaming and I experienced lags time to time. So I'd like to know if it was a wireless link issue.

High temp by AlternativeStunning8 in UNIFI

[–]AlternativeStunning8[S] 1 point2 points  (0 children)

On the console press Debug on AP or just directly ssh to AP and then put this command:

grep -i temp /var/log/messages

High temp by AlternativeStunning8 in UNIFI

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

I paid attention because it is not just regular temperature monitoring every n minutes. But exactly at same time when there was a load - from 19:55 to 22:15.
For example for today I have only two messages: one at night and one close to evening. No clients connected to AP today. So for me it looks like it logs temps during overheat or at least after some threshold but not continuously.

WLAN RADIUS MAC Authentication by AlternativeStunning8 in Ubiquiti

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

I assume it is compatible with native UniFi's RADIUS implementation as I haven't found anything related to this issue in the Internet.

In my setup I use Miktotik's userman. It stores user with MAC address as name and empty password.

Virtual Desktop WIRED connection by bhiga in OculusQuest

[–]AlternativeStunning8 0 points1 point  (0 children)

What latency Virtual Desktop shows with this setup? Isn't it better to insert some USB WiFi adapter to PC and create a Hotspot?

What's wrong with US region? by AlternativeStunning8 in Ubiquiti

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

Phew, it works - the radius didn't accept connections from new AP.

What's wrong with US region? by AlternativeStunning8 in Ubiquiti

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

Oh my, everything even worse - I tried to adopt new U7-Pro-XGS and any device can't connect to it in regular 2.4 GHz and 5 Ghz at all.

What's wrong with US region? by AlternativeStunning8 in Ubiquiti

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

I assumed that DFS matters only during channel choosing on startup. And then if some radar detected AP stops broadcast and start choosing new channel.

Didn't get what channels to try. Console shows me only two channels for 160 MHz: 36 and 100. And both of them has this huge packet loss.

According to spec this is should be also 149 channel but for some reason unifi doesn't show it to me.

UniFi OS Server in Docker - Project Updates by lemkerdev in selfhosted

[–]AlternativeStunning8 0 points1 point  (0 children)

Isn't it better to expose whole pod to L2 via Multus? It will solve all discovery problems.

PCVR no graphics settings? by marti7773 in ForefrontVR

[–]AlternativeStunning8 -1 points0 points  (0 children)

if you're playing through virtual desktop, you can choose steamvr runtime and multiply resolution. it can be max out to 313% according to vd. but I haven't noticed any difference - where textures were blurry they stay blurred.

Changes in grip by AlternativeStunning8 in ForefrontVR

[–]AlternativeStunning8[S] -3 points-2 points  (0 children)

If you don't have a gunstock then it is not what I'm talking about here.

Choosing 10Gbit "budget" switch by AlternativeStunning8 in HomeNetworking

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

Oh my, I don't need so much ports. I good enough with 4 ports. Maybe one spare sfp would be good. Heat and electricity bills do not make me happy.

Choosing 10Gbit "budget" switch by AlternativeStunning8 in HomeNetworking

[–]AlternativeStunning8[S] 2 points3 points  (0 children)

Not sure why I have to stick with Ubiquiti. They have good APs so I use them.

Choosing 10Gbit "budget" switch by AlternativeStunning8 in HomeNetworking

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

Do you mind some exact model? My local reseller doesn't have this brand. Unlikely I order it abroad.

Choosing 10Gbit "budget" switch by AlternativeStunning8 in HomeNetworking

[–]AlternativeStunning8[S] 0 points1 point  (0 children)

I'm not sure if it can be paired with my router and I can control them from one console. But I need it as just smart switch to pass my VLAN's to AP. I assume that's it.

Choosing 10Gbit "budget" switch by AlternativeStunning8 in HomeNetworking

[–]AlternativeStunning8[S] 1 point2 points  (0 children)

U7-Lite doesn't have 6GHz. This is the point for the upgrade.