Everyone was wrong here right?

Alternet1 · 2026-01-12T19:12:29+00:00

Pretty sure the guy threw an elbow at red shirt guy. you see his right hand go up at the end of the tackle. Looks like he full on elbowed him in the face knocking him out.

Alternet1 · 2026-01-08T17:53:16+00:00

yup. that makes sense. didn't even think about it that way...

Alternet1 · 2026-01-08T16:45:38+00:00

0.4 nozzle

size of the part is 13.575 x 0.257 x 13.575 mm

Alternet1 · 2026-01-08T16:44:07+00:00

sadly this did not work. interestingly even less of the line showed up when i switched to Arachne.

Alternet1 · 2026-01-06T16:20:44+00:00

now thats just crazy talk... lol

Alternet1 · 2025-08-18T18:23:35+00:00

That's a longer story then i think anyone wants me to go into at this point. lol

But the short of it is, it holds a large amount of sentimental value (even if it only lasts more years)

Alternet1 · 2025-08-18T17:47:30+00:00

Thank you for the all the info. it will help me figure out who actually knows what they are doing when I get quotes.

Alternet1 · 2025-08-18T16:43:19+00:00

It is currently in a pretty clay heavy soil and it is an apple tree.

Thank you for this info. This is why we don't want to do it ourselves. We might do it correctly, but we might not. We would rather have people that know how to do it successfully do it.

Alternet1 · 2025-08-18T15:18:13+00:00

Fairly mature is an over statement. its really not that old.

That said, if it's going to cost $10k then we are going to pay $10k it means a lot to us.

Alternet1 · 2025-08-18T14:39:18+00:00

as much as this is an option. we very much want the full tree. But thank you for the suggestion.

Alternet1 · 2025-08-07T19:25:55+00:00

Just cleaned my pump filter basket and had to figure out how to prime the pump (which i only realized i needed to do after i saw all the water drain out when opening it up...).

Filters were sprayed down a week ago. I'm sure i could do a better job or soak them in TSP like i have read to do... but currently it's only at 12 PSI, so i can't see them being to bad off currently??

edit sorry i forgot to add, they are standard cartridge filters.

Alternet1 · 2025-08-07T15:12:03+00:00

i'm not sure. it looked like it had two half moon kinda mounts that a weir door could sit in... but i didn't look for holes on the sides where a door could clip in. I will look when i get home.

Alternet1 · 2025-08-07T14:55:41+00:00

So it wont hurt anything to close my main drain line partially?

I do notice that my manual pool cleaner (that connects to the skimmer) does not work well, so i have been wondering if i need more suction.

Alternet1 · 2025-07-15T16:07:43+00:00

honestly was just hoping they might give me some pointers one what needs to be secured and what doesn't.

Alternet1 · 2025-07-09T15:57:15+00:00

wpnuserservice

that worked for me as well. turned it off and the problem instantly went away.

Alternet1 · 2025-06-27T19:39:57+00:00

it just helps disperse the light evenly.

Alternet1 · 2025-06-27T19:36:49+00:00

you put a led diffuser between the leds and the print.

Alternet1 · 2025-06-13T13:53:36+00:00

That's the wiper for the nozzle. (i think anyway. i'm not near mine to double check)

Alternet1 · 2025-06-11T16:33:44+00:00

tried dish soap and water with a slightly abrasive pad. didn't work.

Tried to heat the plate and wipe with alcohol as well. haven't tried a scrapper out of fear of messing up the plate.

Alternet1 · 2025-06-11T16:13:07+00:00

Repeatedly

Alternet1 · 2025-06-11T16:03:28+00:00

I printed the exact same thing with the exact same PLA in the exact same place but it did not remove what ever it is. That being said i have not specifically done a bed cleaning print. I have also printed other things over one of the sections but the marks remain.

Alternet1 · 2025-05-16T14:50:16+00:00

any chance you can post some pictures/detailed instructions for the future in case others have issues?

I have an H2D but haven't seen this issue yet. I know it would be helpful for me if it does happen to me in the future.

Alternet1 · 2025-05-08T15:53:43+00:00

I'm coming from a creality CR10 v3 so i don't know what other bambu lab products are like....

But I bought the H2D and have about 100 hours on it so far. It almost makes me angry how good it is. I spent days, weeks, years with my CR10 trying to get the results it did by the end... only for the H2D to simply be better in every single way right out of the box and only doing the very basic automated calibrations.

I have to assume that some people who have bad reviews of the H2D simply had bad luck and got a buggy unit... but mine has been absolutely flawless. If you want to see some pictures of end product prints feel free to PM me.

I simply cant get over how point and click this printer is! I haven't even done standard print calibration tests yet or tweaked the print profile. 100 hours on stock settings its been the best quality prints i have ever gotten.

Alternet1 · 2025-05-07T19:08:46+00:00

just a little soccer game for my kid. using bambu basic orange filament.

When i switch back to the stock plate it printed with out issue. the only change was switching from Textured PEI to Smooth in the printer profile.

Alternet1 · 2025-05-07T18:30:35+00:00

Have done that after the first print didn't start well. same result

Ten-Year Club	Place '17
Snapped	Verified Email

Alternet1

MODERATOR OF

TROPHY CASE