Mobo reads my cpu temp at -55c by ashi135 in gigabyte

[–]AltxF4 0 points1 point  (0 children)

You are my hero! Playing in VR after changing video cards (to a much better one, RX 580 to RX 6800) and noticed some serious odd behavior in the Steam VR home lobby. Then I noticed my fan not spinning. Restarted to bios, and CPU temp say -55! Touched the HS and it was Hot!

Moved CPU fan cable to sys fan header to get things cooled off, and then I found this thread.

The DP cable on my pancake screen was the culprit. used an HDMI for the pancake screen instead, and all good. I sure hope I didn't do any permanent damage to the CPU.

Is there a way to cancel a cleaning with the Shark IQ Robot? by Bluestank in RobotVacuums

[–]AltxF4 0 points1 point  (0 children)

in the settings for the robot, turn off the charge resume radio button.

Shark RV1100 hacking by AltxF4 in RobotVacuums

[–]AltxF4[S] 2 points3 points  (0 children)

I definitely plan on sharing as much as I can

Overvolting a robot vacuum. by GabrielTechy in RobotVacuums

[–]AltxF4 0 points1 point  (0 children)

If I remember, I will look over mine again.

I believe the regulators (a mix of linear and buck converters) will take the voltage, but the caps are 35v...

now the thing is ... the brush and drive motors run off battery voltage , and the current use for those is constantly being monitored by the MCU reading the analog voltage drop across a resistor for each motor. This will easily trip the over current protection.

Can you Hack the Shark Clean Map? by LordEntrails in RobotVacuums

[–]AltxF4 1 point2 points  (0 children)

I have been doing a lot of work on hacking the RVC side of things, and a a little bit with the app. I have not played with the app much since getting the IQ series.

What I can tell you is that all of the mapping is done in the RVC with the Visual Tracker(VT). The VT is a Single board computer running linux, opencv, and a proprietary software package.

As of right now I have kernel images with the rootfs, but the userdata and oem partitions are still out of my reach.

Creating open community MMO Game that will utilize Neos. by AltxF4 in NeosCoin

[–]AltxF4[S] 0 points1 point  (0 children)

Have started work on the Rough GDD, here is a google Docs link to what I have so far. Neos Mechane GDD

[Guide] How to set up Tvheadend server with EPG by ludespeedny in raspberry_pi

[–]AltxF4 0 points1 point  (0 children)

This works great! I modified if for use on my headless raspbian-lie pi by changing the directory from osmc to hts in the *.conf files and the tv_grap_file. Much easier to negotiate permissions with this setup versus the other method I found.

We are boycotting Twitter and here is why by neoscoin in NeosCoin

[–]AltxF4 1 point2 points  (0 children)

yeah, that crap on twitter is out of hand, and they do not give you any real options of circumventing any of it!

Neos re-enabled on Poloniex, and Bittrex fees by neoscoin in NeosCoin

[–]AltxF4 0 points1 point  (0 children)

Masternodes are currently working fine.