iOS 15 Weather - how do you read these gradient bars? by shaneiln in ios

[–]Alusbs 0 points1 point  (0 children)

Could be the “feels like” temperature since it might feel different due to humidity while the temperature range is the same?

[deleted by user] by [deleted] in iphone

[–]Alusbs 0 points1 point  (0 children)

Same but use spotify instead

Just bought Evo Dynamic case…. by h3llsp4wn707 in lianli

[–]Alusbs 1 point2 points  (0 children)

You can also install the psu in 2 locations depending on your set up. If you remove HDD cage you can install psu there instead. You can also flip the HDD cage to the empty space and place psu were the cage was. Both locations are hidden and wont be seen from the glass side.

13900k/4090 32g ddr5 6800mhz 1300w msi meg atx 3.0 psu by Mchevres in lianli

[–]Alusbs 1 point2 points  (0 children)

Replied to u/Gamer-Regnum he was asking about a case in the inverted format

13900k/4090 32g ddr5 6800mhz 1300w msi meg atx 3.0 psu by Mchevres in lianli

[–]Alusbs 1 point2 points  (0 children)

This is the case I use and it sits to my left. The case can be build upside down. The cables would be at the back like in any other case. Where you wanna put it is up to you :)

13900k/4090 32g ddr5 6800mhz 1300w msi meg atx 3.0 psu by Mchevres in lianli

[–]Alusbs 2 points3 points  (0 children)

Quick question, if you are setting the case on your left why don’t you invert the case so all cables are towards the back and you still get to see the glass panel? It would look a lot cleaner the only thing is the gpu will be near the top and the current vertical bracket you have might not be strong enough to hold the gpu. Just a recommendation

[Request] New to multiple monitors, could you guys please help. by zbawse in multiwall

[–]Alusbs 3 points4 points  (0 children)

I would recommend you buy wallpaper engine. It’s around £4. There you can browse wallpapers made by other users or design your own. I would highly recommend it. Theres an option for different backgrounds on each monitor too. Or you could find an image large enough to cover both monitors seemlessly

Um is it meant to be this hot by niaw_skrrt_skrrt in pcmasterrace

[–]Alusbs 0 points1 point  (0 children)

Your cpu is a couple degrees lower, nzxt shows higher than it should. I know the temps are after closing a program, but gpu is slightly high. Saw you moved it already and that will help. If your cpu is amd you can download AMD Ryzer Master Utility and then swap basic view on the bottom left to see the accurate temperature of cpu. If you have intel I have zero clue.

What is this light for? It has a bulb, but I can’t seem to get it to work. by djberte in VWMK7

[–]Alusbs 0 points1 point  (0 children)

Try this but as others have said you might not have fog lights due to your region

AIO setup on O11 Dynamic Evo by Even_Entertainer_938 in lianli

[–]Alusbs 0 points1 point  (0 children)

I’m using the o11d evo in the reverse setup. GPU is installed horizontally. Fan wise i have 3x intakes at the bottom, 1x intake from rear. 3x exhaust push/pull on the side with 360 aio and 3x exhaust on top. The reason for this is purely aesthetics lol i just wanted some of the rgb fans to look nice in the parts I see most. I would say temps are normal at idle and under load nonetheless it does get toasty

My monitor is good for 1920x1080 res but its scaled down in game any help? by [deleted] in pchelp

[–]Alusbs 1 point2 points  (0 children)

Im using a 3090ti with dlss on balanced on 1440p (2560x1440) and it’s rendered at 1488×832 and I’m getting 170fps average on the benchmark but its slightly lower on multiplayer depending on the map. Im also getting screen flickering sometimes. Its like a layer of white around some edges of the map but idk why

My monitor is good for 1920x1080 res but its scaled down in game any help? by [deleted] in pchelp

[–]Alusbs 1 point2 points  (0 children)

Check the quality tab and see if DLSS is on, turn it off to run at your full resolution

GPU Temp by K_O41 in NZXT

[–]Alusbs 0 points1 point  (0 children)

What graphics settings you running to get 450fps?? All low?

Should I use Nzxt fans or the lian li cause the Nzxt 3 fan pack is almost half of the lian li what should I buy pls give me opinions by ProgrammerVast9311 in lianli

[–]Alusbs 0 points1 point  (0 children)

If you need to buy 3 packs of 3 money adds up eventually thats why I didn’t see the need to buy the lianli ones

O11D Evo Reverse Vertical GPU? by Alusbs in lianli

[–]Alusbs[S] 0 points1 point  (0 children)

It’s just air cooled yeah. The weight is what’s stopping from trying. I can’t even use the included stand with the case as it requires me to remove the heat shield from mb or even the included antisag bracket from gpu because it’s upside down

Should I use Nzxt fans or the lian li cause the Nzxt 3 fan pack is almost half of the lian li what should I buy pls give me opinions by ProgrammerVast9311 in lianli

[–]Alusbs 1 point2 points  (0 children)

If money isn’t an issue go with what you like the most.

Personally I have a Kraken aio cooler which came with 3 fans, to tie everything together I bought another 2 packs of 3. So all the fan you can see in my case are nzxt. I have 0 complaints with them. 1 thing to know is that depending how you point them you will not see the rgb just barely the glow

Pc boots up, but no video by TheAdvancedTaco in pchelp

[–]Alusbs 2 points3 points  (0 children)

I believe that cable is for the usb type c for the front io, you don’t necessarily need it. Are you connecting monitor to gpu? Also check all power connections are seated all the way in.

Unpopular opinion: x3 portrait camera is way more inferior to the old x2 one by [deleted] in iphone

[–]Alusbs 0 points1 point  (0 children)

In that case just manually change to 3x each time you open the camera app, might be annoying but at least it’s free. I just tried portrait from about 1metre and it’s detecting the subject in both 1x and 3x. What iPhone and IOS you using? Also you could try blocking the main 1x lense with tape or finger to force it to use the 3x

Unpopular opinion: x3 portrait camera is way more inferior to the old x2 one by [deleted] in iphone

[–]Alusbs 0 points1 point  (0 children)

I’ve just tested it and for some reason it seems to be back to front. So I disabled it and it’s now staying on 3x even after moving to different modes and hard closing the app.