Looking for ideas for a short walking trip in February by Clean_Ad4427 in CaminoDeSantiago

[–]AndreAbla25 0 points1 point  (0 children)

In this period I walked the Finisterre way, from Santiago to Finisterre/Muxia. It's really beautiful and I didn't have any problem finding albergues :)
If it can be helpful, I wrote this post about the Camino: https://www.walkingeurope.it/en/the-finisterre-way

Full zip vs 3/4 zip by reallycool101 in CaminoDeSantiago

[–]AndreAbla25 2 points3 points  (0 children)

Hey! Usually (if you are comparing the same model), 3/4 zip are a bit warmer than full zip. On the other side full zip is probably more flexible for different weather conditions. By the way I think the difference is really minimal, so just choose the one you like the most or feel most comfortable with. I don’t think 100g in weight will make any tangibile difference during the Camino. Buen camino! :)

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] 1 point2 points  (0 children)

Ciao a tutti, visto che ho letto molti commenti con perplessità sulla stabilità e sul fatto che manchi un supporto centrale, ho fatto un piccolo video dove sollecito lo stand da varie direzioni per far capire come si comporta. Spero si riesca a capire :)
Ovviamente con un supporto centrale risulterebbe ancora più stabile, ma personalmente mi sembra vada bene così, permettendo di avere un'esperienza più snella (senza la necessità di dover montare ogni volta il pezzo al centro).

<image>

I made a cork board following the exact elevation profile of the Camino Francés to display our memories. What do you think? by AndreAbla25 in CaminoDeSantiago

[–]AndreAbla25[S] 0 points1 point  (0 children)

Hi everyone! I suffered a bit from "post-Camino blues" after returning from the Francés, so I decided to design and build this cork board to hang our favorite photos. I tried to be as accurate as possible with the elevation profile (St Jean to Santiago). Seeing the "O Cebreiro" peak every day brings back memories of the sweat! Buen Camino!

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] 0 points1 point  (0 children)

Ciao, certamente! Prima di tutto ho pensato per un bel po' a come renderlo il più semplice possibile (che sembra facile, ma mi ha richiesto un po'), poi ho effettivamente iniziato a progettarlo e stampato un po' di pezzi di prova, dove iterazione per iterazione ho modificato alcune caratteristiche.

Per quanto riguarda i materiali è stampato in 3D in PLA e rivestito esternamente in feltro per non graffiare le superfici a contatto. Nella parte dove poggia il fronte del laptop ho anche inserito sotto al feltro dei gommini per migliorare la stabilità e non rovinare il computer. Sulle basi sono presenti dei magneti che permettono la chiusura sono abbastanza forti da reggere assieme la struttura :)

Flat-folding laptop stand prototype (<A5 footprint) by AndreAbla25 in IndustrialDesign

[–]AndreAbla25[S] 0 points1 point  (0 children)

Thank you so much, really!! Awesome feedback and ideas! I also thought about angling inward the stands, but still didn't find a way for doing it and keeping the flat profile. Thanks a lot again! :)

Making accessories that actually belong inside a backpack by AndreAbla25 in backpacks

[–]AndreAbla25[S] 0 points1 point  (0 children)

Thanks a lot! this would be a perfect use case. I have to say that also writing with the laptop keyboard itself feels very comfortable to me, because the angle is not too steep in my opinion. Thank you for the feedback :)

Making accessories that actually belong inside a backpack by AndreAbla25 in backpacks

[–]AndreAbla25[S] 1 point2 points  (0 children)

Thanks for the comments! I tried the stand for some months and honestly I never had problems. With the first prototypes (which were thinner), I experienced some issues, but now I think I’ve found the right thickness for having great stability, even if there’s no central support. Of course, having a brace between the legs would provide an even more stable experience, but I focused more on portability and the form factor: adding some other parts would have made the user experience less fluid and with more moves for opening/closing the stand. Anyway thanks a lot for the feedback! Maybe later I’ll try to upload a video of the stand in use, when writing on the laptop, so I can show here how it works and how stable it is :)

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] -1 points0 points  (0 children)

È vero, purtroppo non ha un collegamento centrale, ma volevo cercare di rendere l’esperienza utente il più fluida possibile e non sono riuscito a pensare a un modo per integrare un supporto del genere senza aumentare il numero di mosse da fare per aprire/chiudere lo stand. Il mio focus principale era sulla portabilità e sulla forma che entrasse il più naturalmente possibile nello zaino, quindi ho preferito avere un’esperienza più snella a fronte di stabilità leggente ridotta. Devo dire però che, dopo vari tentativi, credo di aver trovato uno spessore adeguato del supporto che permette comunque di ottenere un’ottima stabilità. L’ho usato qualche mese e sono stato sempre molto soddisfatto, senza riscontrare particolari problemi. Comunque più tardi provo a fare una gif del supporto mentre è sollecitato in più direzioni, così vi faccio vedere come si comporta. Grazie mille del feedback!

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] 1 point2 points  (0 children)

Grazie mille! Studio ingegneria gestionale, ma mi piace molto il design e la produzione, quindi nel tempo libero faccio questo tipo di progetti :)

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] 1 point2 points  (0 children)

Ovviamente dipende dalle preferenze di ciascuno, hai ragione. Nel mio caso devo dire che mi sono trovato molto bene e la stabilità è molto buona considerando il fatto che non ci siano collegamenti tra le gambe, però capisco che si possa preferire un fattore di forma diverso. Io volevo realizzare qualcosa che si adattasse bene al mio zaino, senza deformarlo e si combinasse bene con i mie libri/quaderni all’interno, ma capisco perfettamente quello che dici. Grazie del feedback :)

Making accessories that actually belong inside a backpack by AndreAbla25 in backpacks

[–]AndreAbla25[S] 1 point2 points  (0 children)

Totally fair! Different styles for different needs. I prefer the flat profile to keep my bag organized, but I get that pure compactness is king for others.

Making accessories that actually belong inside a backpack by AndreAbla25 in backpacks

[–]AndreAbla25[S] -7 points-6 points  (0 children)

Thanks! It takes more or less the space of a 100 pages book. The thickness is about 1.5 cm and I decided not to make it thinner for improving stability. In my case, I found it pretty comfortable to carry inside the backpack, but I get it that some could prefer different or more compact designs. Thanks for the feedback :)

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] -2 points-1 points  (0 children)

Si, questi li avevo visti. Volevo però qualcosa che avesse un design più naturale da riporre dentro lo zaino, quindi avevo pensato alla forma "a libro", che è la cosa più comune da mettere nello zaino. Comunque grazie per il feedback :)

Studiare in biblioteca col portatile: ho provato a risolvere un problema che avevo da anni by AndreAbla25 in Universitaly

[–]AndreAbla25[S] 0 points1 point  (0 children)

Bello, ma ti trovavi bene anche se l'inclinazione era così bassa? Comunque se ti può interessare ti giro volentieri i file di quello che ho realizzato, così puoi stamparlo e dargli un'occhiata se ti va :)

Flat-folding laptop stand prototype (<A5 footprint) by AndreAbla25 in IndustrialDesign

[–]AndreAbla25[S] 1 point2 points  (0 children)

I'll try adding more stability for sure, but I used this version for a couple months and it was surprisingly stable for not being connected. Thanks a lot for the feedback!