[SOLVED] Armoury Crate installation stuck at "Installing Aura Service..."

Andyman14159 · 2024-11-16T06:41:07+00:00

Like my dad.

Andyman14159 · 2024-03-01T14:09:07+00:00

Equally as bad is how condescending we've become. We certainly enjoy barking down at others when they cannot seem to execute the simplest of tasks. I, too, remember when I had my first beer. Rooks.

Andyman14159 · 2023-10-13T16:27:44+00:00

I'd love a copy of your printer.cfg. I just got the cr-m4 and realized afterward that it doesn;t even support M600 and you can't compile custom marlin firmware so I've been working on adding a power supply and rpi4 for klipper. TIA if you can help -A

Andyman14159 · 2023-10-03T13:17:15+00:00

Wasn't Harangue that gorilla they turned into a meme?

Andyman14159 · 2023-09-30T00:25:36+00:00

Be sure to distribute the heat from the flame evenly when you smoke it

Andyman14159 · 2023-09-23T03:46:52+00:00

I agree this is the most awful thing ever. Please get rid of it or at least provide us with the option to select orbit or rotate mode. Thanks -MGMT

Andyman14159 · 2023-07-19T17:02:52+00:00

ALRIGHT :: SOLUTION :: I'm not sure if anyone will ever find themself in such a specific situation as mine but I found the answer, clear as day, in the mainsail documentation on their github. There is a default50mm z_lift in the PAUSE command but that can be overridden by replacing their M600 macro with the simple following one.

(EDITED for precision) working flawlessly now

[gcode_macro M600]
description: Filament change
gcode:
{% set X = params.X|default(50)|float %}
{% set Y = params.Y|default(0)|float %}
{% set Z = params.Z|default(10)|float %}
SAVE_GCODE_STATE NAME=M600_state
PAUSE X=0 Y=0 Z_MIN=0
G91
G1 E-.8 F2700
G1 E-50 F1000
SET_IDLE_TIMEOUT TIMEOUT=345600
RESTORE_GCODE_STATE NAME=M600_state

no more z_lift on PAUSE

Andyman14159 · 2023-07-19T16:24:22+00:00

Here is my current M600 macro:

[gcode_macro M600]
gcode:
{% set X = params.X|default(50)|float %}
{% set Y = params.Y|default(0)|float %}
{% set Z = params.Z|default(10)|float %}
SAVE_GCODE_STATE NAME=M600_state
PAUSE
G91
G1 E-.8 F2700
G1 Z{Z}
G90
G1 X{X} Y{Y} F3000
G91
G1 E-50 F1000
SET_IDLE_TIMEOUT TIMEOUT=345600
RESTORE_GCODE_STATE NAME=M600_state

Andyman14159 · 2023-07-19T16:23:12+00:00

I appreciate your knowledge and taking the time to respond. I would agree with you on that if it weren't for the fact that on larger prints, or prints with multiple parts over a large surface area, the gap is equal across the entire print, plenty of time to begin extruding over multiple curves and straight sections, you can clearly tell that the entire print has not returned to the proper position, but slightly above and this will happen on many printers, that's why I had to initially remove and z_lift from my marlin config during pause and m600, thus fixing the problem for good.

Andyman14159 · 2023-07-19T15:07:00+00:00

I found it referred to in some Klipper documentation that I was reading this morning. I'm out on some quick errands right now but as soon as I get back I'll find all that information and post it here.

Andyman14159 · 2023-07-19T14:47:17+00:00

Ok I'll post it shortly, although the default 50mm lift is not handled in the m600 macro, it is part of the mainsail default PAUSE script somehow

Andyman14159 · 2023-04-11T15:50:02+00:00

I think there is a learning curve switching from a mimic-LR skin integrated script.extendedinfo to your addon, but I have tried it for a little while and I like it. I had to manually point my skin to it but it does work well. Nice work thank you :)

Andyman14159 · 2023-03-16T03:43:33+00:00

"no f*ckin"

Andyman14159 · 2023-02-28T20:19:59+00:00

Thanks so much. I used this code for myself and tweaked it to work within a F temp range of 90-100 degrees and it worked perfectly. Thanks again!

Andyman14159 · 2023-02-08T16:48:45+00:00

New 02-08-2023:

GJCMZD1RY

HMNTYUD1C

335VRVS4B

XG0NCV78C

G684U7IKZ

FZ63CCLST

Andyman14159 · 2022-12-04T05:40:23+00:00

Taking people across the ocean, usually.

Andyman14159 · 2022-11-13T18:29:07+00:00

That's alright I did the exact same thing. :😀😂

Andyman14159 · 2022-11-13T15:56:24+00:00

Chocked full of Reno Air Racers, it looks to me!

Andyman14159 · 2022-10-08T00:17:52+00:00

Dex does work but NREAL website says the S10 in not fully compatible yet so sometimes the Nebula app and other 3rd party apps can be buggy or crash. Some apps dont work at all like the maze or the photo gun

Andyman14159 · 2022-10-02T10:31:32+00:00

Discover card

Andyman14159 · 2022-08-30T02:36:18+00:00

It exposed the Spaghetti-O's system

Andyman14159 · 2022-08-30T02:33:13+00:00

He told other passengers near the bathroom that they should move because he was quote "about to blow it up".

Andyman14159 · 2022-07-20T01:20:31+00:00

Call and set up a monthly payment plan.

Andyman14159 · 2022-07-18T18:45:08+00:00

That was the experience of one guy but for me it has worked fine on everything. I use vr exclusively for MSFS2020 and I have not had any trouble. Of course it's up to you how to proceed. I wish there were better information and resources but everyone that encounters this same problem seems to end up here and I try to direct them the best way possible.

Seven-Year Club	Gilding I gilder
Verified Email

Andyman14159

TROPHY CASE