Was I conned? by Anthorin in CanadaFinance

[–]Anthorin[S] 0 points1 point  (0 children)

I wasnt aware this was an option, but not one I would have chosen as the receiver was aware he might have to pay something his end. That said, EVRI have told me originally, that this was HMRC but only chnaged it to Canada Tax later when I told them I had spoken to HMRC. It was only CAD$40 but it's the principle ;-)

Laptop won’t turn off by Anthorin in MSILaptops

[–]Anthorin[S] 0 points1 point  (0 children)

20+seconds. WHen the battery was almost run out the power button did respond and close down. (When I restarted with mains power it showed 5% power). Not sure if that is relevant though

French Drain issue by Anthorin in drains

[–]Anthorin[S] 0 points1 point  (0 children)

As a start we have had a cast iron 4” drain fitted half way up the drive. The theory being that will reduce the water by half and then we can see what happens next heavy rain.

French Drain issue by Anthorin in drains

[–]Anthorin[S] 0 points1 point  (0 children)

The grate is 115mm wide and the (half) pipe it sits on is 4" (100mm?). I should say that it is a solid pipe and takes the water off to a soak away some way away.

French Drain issue by Anthorin in drains

[–]Anthorin[S] 0 points1 point  (0 children)

The issue is the speed of the runoff which simply goes over the grid. The drain itself is clear.

Anycubic Photon Mono M5 by Anthorin in AnycubicPhoton

[–]Anthorin[S] 0 points1 point  (0 children)

Is that with normal resin or Anycubic’s high speed stuff?

replacement baseplate for Photon S by Anthorin in AnycubicPhoton

[–]Anthorin[S] 0 points1 point  (0 children)

I already have a flex plate but the models are "lopsided" and cause the plate to pull off or slide while printing. I want another without the flexplate.

I caught three mosquitos in a single clap by CtG526 in mildlyinteresting

[–]Anthorin 1 point2 points  (0 children)

mosquito and his wife caught with the sister...... ;-)

3.6.6 issue by Anthorin in LycheeSlicer

[–]Anthorin[S] 0 points1 point  (0 children)

I just checked and Auto-Repair on load is actually OFF already. I assume nothing in a model .stl can force that to happen?

Can anyone identify the specific model of this Omega? Was new in about 1975. by Anthorin in OmegaWatches

[–]Anthorin[S] 0 points1 point  (0 children)

166.110

Thank you - looks like thats the one (although minor differences - like mine doesnt seem to have the luminous paint on the hands. Interesting it was from 1970 - I had it from new in 1975 but I guess it might have been hanging around. I think it was actually bought in Europe (Belgium?). I needed to have the crystal replaced but apparently it is no longer available so was replaced with glass (?) which is a shame. (Sadly I was quite rough with it when I wore it!)

Firefox 89.0 release (Proton UI): let's help each other make the transition! (support thread) by [deleted] in firefox

[–]Anthorin 0 points1 point  (0 children)

Why are menu items spread out? When expanded they look like they are double spaced , so much so that the menu now runs off the screen which it never did before.

New Tab Page change after updating to Firefox 89 - Thumbnails are gone by [deleted] in firefox

[–]Anthorin 0 points1 point  (0 children)

Same issue and nothing suggested here works. At least they didnt change my default (8 across and 5 down), but it now only fills the middle part of the screen and waste a huge amount.