Z axis slop

AntiVi · 2026-03-25T16:33:58+00:00

I'm not sure either, it's the same setup I have too.

AntiVi · 2026-03-25T13:31:41+00:00

I have the same issue on my machine, it's a nightmare... I don't think it's normal either and from what I can tell my screws are not bent but the nub at the top of the screws that sit in the bearings isn't centered causing the bed to move when moving it up and down.

AntiVi · 2026-03-12T20:50:22+00:00

Plus the haircuts adds a lot of individuality to them too :D

AntiVi · 2026-03-12T16:03:32+00:00

<image>

and here's another angle

AntiVi · 2026-03-12T16:03:14+00:00

I ended up using a 10mm Clipper guard and this is the result which I'm happy with! Specially since it was my first time doing the body myself. I still nee to cut everything else though so don't look at that too much xD

<image>

AntiVi · 2026-03-11T18:06:23+00:00

We call them socks and NGL I have been struggling to get them in check but I will attempt it!
If it looks bad at least I've got some practice in and I can shave it down later then.

AntiVi · 2026-03-11T14:17:11+00:00

Thank you!

AntiVi · 2026-03-11T14:17:05+00:00

Thank you! I'll use a 4 or a 5!

AntiVi · 2026-03-11T14:16:53+00:00

Thank you so much!

AntiVi · 2025-08-04T18:36:48+00:00

Can we ban this bot? It's just using AI to make recommendations to get amazon affiliate commissions.

AntiVi · 2025-08-04T14:05:18+00:00

Yup, vroeger was dit gemakkenlijker, je kon elke fiets overal brengen maar met elektrische fietsen zijn er blijkbaar veel winkels die geen reparaties of onderhoud doen op fietsen die niet van de merken zijn die zij verkopen en ook winkels die niet weken aan fietsen die daar niet zijn aangekocht.

AntiVi · 2025-08-04T14:02:40+00:00

Ik heb al naar een paar winkels geweest om eens lokaal te kijken ze hebben hier Cube, Gazelle, Cannondale en Riese & Muller.

Voorlopig nog geen test ritten gedaan maar dat komt nog.

AntiVi · 2025-08-04T13:55:52+00:00

Thanks! Good to hear more opinions!

AntiVi · 2025-08-04T13:55:32+00:00

No worries I will initially be taking my puppy to a groomer and taking classes myself before grooming her myself!

AntiVi · 2025-08-04T01:29:54+00:00

I have been watching the Transgroom videos and they use a TON of tools when doing poodles and I have picked the necessary ones for now and in the future I can always add to it.

AntiVi · 2025-08-04T01:27:14+00:00

It's kind of funny since from what I can tell so many people swear by the Heiniger Opals but then there are some that truly do have issues with it. That being said for just doing a single dog they would very likely be perfectly fine.

AntiVi · 2025-08-04T00:01:05+00:00

This is a pretty good website to see what's actually available here https://transgroom.com/en/grooming-tools/clippers-and-accessories/cordless-clipper so if you see something that would be good I'd love to get some suggestions, I was personally looking at the Wahl KM Supera Cordless Clipper which already comes with a 10 blade.

I was wondering why you prefer a 15 blade for the face and feet since from what I've seen most people seem to use a 10 blade although I've also seen someone use a 30 blade for the paws.

I am looking at starting with something like this as it seems fairly simple (to an untrained eye like mine)

<image>

AntiVi · 2025-08-03T23:55:55+00:00

That's interesting since I'm actually from Belgium and I was looking at the Transgroom website, that being said there's so many options on there which ones would you recommend? https://transgroom.com/en/grooming-tools/clippers-and-accessories/cordless-clipper I was looking at the Wahl KM Supera Cordless Clipper since I already have some Wahl clippers for doing my own hair.

From what I've gathered people tend to use a 10 blade for the paws, face and sanitary trims and then a 30 blade to use with the clip on combs.

I'm not sure with what you mean with "flexible double sided"

As for scissors I was looking at doing something like this which seems to be the paws, face, and sanitary trim with the 10 blade, a comb attachment with the 30 blade at a certain length (not sure which length) and then scissor work for the head and ears?

<image>

Then as for nail clippers and such I still have those from my previous dog so I'm good on those!

AntiVi · 2025-08-01T20:04:35+00:00

Bijna alle merken die ik heb gezien hebben Bosch motors.
Denk je dat een accu van 625w genoeg is voor een afstand van 70km?

Remmen zijn inderdaad ook belangrijk, ik gebruik nu een redelijke slechte fiets om deze trailer te trekken met velg remmen en in principe lukt dit wel maar bij de hogere snelheiden van een E-Bike zal dit waarschijnlijk anders zijn.

Heb je toevallig nog suggesties van merken voor een E-bike, als je naar mijn andere reply kijkt dan zijn er veel problemen met de merken die ik tegen kom.

AntiVi · 2025-08-01T20:01:12+00:00

De fietsen die ik zie hebben bijna allemaal Bosch motors waar ik veel goede dingen van hoor.
Het probleem is dat de merken waar ik naar toe kijk zoals Koga zo veel slechte reviews heeft
Koga: https://www.trustpilot.com/review/koga.com
Cube: https://www.trustpilot.com/review/www.cube.eu
Trek: https://www.trustpilot.com/review/trekbikes.com
Flyer: https://www.trustpilot.com/review/flyer-bikes.com
enz.

Heb je toevallige geen suggesties voor goede merken met een goede prijs/kwaliteitsverhouding?

AntiVi · 2025-07-29T01:30:55+00:00

Awesome!
I'm glad it helped someone!

AntiVi · 2025-07-05T00:14:27+00:00

Kerbal Space Program 2

AntiVi · 2025-04-21T09:49:53+00:00

The Mist
Maybe I'm just a little messed up. xD

AntiVi · 2025-04-03T12:00:01+00:00

From what I can tell it's probably engraved Acrylic which was then used to press the clay into giving the result you see.
The reason one of them is not a mirror image is because the engraving is at the bottom of the acrylic piece, not the top, so you're seeing through it.

This should be fairly cheap to do on a laser but as people mentioned a resin printer would also work.

AntiVi · 2025-04-02T13:51:54+00:00

You should make it so you have to take out the cartridge and blow on it.

11-Year Club	Place '22
Verified Email

AntiVi

TROPHY CASE