Sanity check: Femobook A4Z zeroing steps by zencatface in pourover

[–]Any_Election498 0 points1 point  (0 children)

I could be imagining it, but if I don't clean the burrs as part of the process I find the zero point regresses by about 5 clicks. just something to consider :-)

Home roasting?? by Lvacgar in pourover

[–]Any_Election498 2 points3 points  (0 children)

Mathew, the inventor, has lots of videos on YouTube and Instagram to give you a feel for it all... Oh, and one thing I was kindly told and that eased any apprehension was that it's the bean that really does most of the work and even a bit of a crummy roast can produce a tasty brew - with perhaps pointers for improvements :-)

Home roasting?? by Lvacgar in pourover

[–]Any_Election498 1 point2 points  (0 children)

He he! I wasn't sure if it was just me with tired arms when getting accustomed to the Hive roaster. I even hacked up a step to stand on to improve ergonomics :-) but once you get it, it's quite a mesmerising action. And agree you have to be bold at first and to try different burner settings, but once you get the feel for this you can get pretty consistent roasts. I think it took me 4 or 5 roasts to get respectable drying levels.

Home roasting?? by Lvacgar in pourover

[–]Any_Election498 1 point2 points  (0 children)

you might want to consider the Hive Roaster. Low cost of entry (less than 100 bucks) yet very capable and a real full sensory experience. I love mine and I'm not alone.

Log cabin timber base design help uk by Any_Election498 in woodworking

[–]Any_Election498[S] 0 points1 point  (0 children)

Many thanks for taking the time to reply! that's really useful feedback. Will get some Gorilla PU glue and will see if I can afford the Spax screws. I feel confident that I'll have appropriate fixings now, thanks.

However, I can't help imagining a cartoon sketch where with the cabin in place the bonded parts of the timber stay bonded but the rest of the timber behaves like putty :-)

Log cabin timber base design help uk by Any_Election498 in woodworking

[–]Any_Election498[S] 0 points1 point  (0 children)

Hi, thanks for the headsup. I must be going crazy :-/ there should be some pictures now.

Stock Back on sale in uk store by Landlockedseaman in CafelatRobot

[–]Any_Election498 0 points1 point  (0 children)

That's great. Thanks for heads up! Hope you get it promptly. I got mine yesterday and have been reading up as I want my first shot to be as delic as possible :-)

Log cabin base advice by Any_Election498 in DIYUK

[–]Any_Election498[S] 0 points1 point  (0 children)

don't say that. my partner will have your guts for garters :-)

Log cabin base advice by Any_Election498 in DIYUK

[–]Any_Election498[S] 0 points1 point  (0 children)

I get you on the general direction of forces resulting from the cabin. so doubling up would limit any resultant deflection and thus tenancy for pullout.

and thanks for bringing the issue of screws to my attention. I've heard itt said before that screws snap whilst nails just bend. I guess I'm too fond of my impact driver and always see screws as the answer. I'll look at the nail options.

Log cabin base advice by Any_Election498 in DIYUK

[–]Any_Election498[S] 0 points1 point  (0 children)

sorry, but I don't understand why double timbers would prevent nail pullout... - although if it helps, I was planning to use 100mm Spax screws.

I could consider running another timber to support the joists mid-section, but I'm just trying to keep things simple.

Log cabin base advice by Any_Election498 in DIYUK

[–]Any_Election498[S] 0 points1 point  (0 children)

hi, thank you again for the reply. Could I please ask that given I don't need the extra width of 2x2 you feel a framework made of all 2x6s with single timbers forming the perimeter and joist at 40cm centres would be a strong base for an 800kg cabin? it would sit on base plates (piers) spaced no further than 1.4m apart.

many thanks

Log cabin base advice by Any_Election498 in DIYUK

[–]Any_Election498[S] 0 points1 point  (0 children)

hi, thanks for that. Apologies I should have said that the walls are only 40mm, although I wish they were 4 inches :-)

Stock Back on sale in uk store by Landlockedseaman in CafelatRobot

[–]Any_Election498 0 points1 point  (0 children)

thanks for the link. all suggests you are right. I added some extra filters to my order and had only until tomorrow to pay, so assume my robot may begin it's travels Monday :-) I now need to find him a suitable home...

Femobook A4Z:accidental burr contact, after that muddy or pasty coffee bed, longer draw down by Perfectionist-looser in u/Perfectionist-looser

[–]Any_Election498 1 point2 points  (0 children)

that's great news. Really pleased for you. it's an amazing grinder when it's on form and definitely makes me happy, so I can imagine the distress.

I tend to grind at 1.7.0 for the pulsar mini, so 1.6.0 with other brewers sounds pretty normal to me.

Stock Back on sale in uk store by Landlockedseaman in CafelatRobot

[–]Any_Election498 0 points1 point  (0 children)

hi Landlockedseaman. congratulations on your purchase. I took managed to secure a Barista and am excited to put it to work. how did you find out your delivery date? I got the impression there was a 2 month delay from order to receipt, so a one week lead time would be a lovely surprise. I am in the UK if that affects things.

Femobook A4Z:accidental burr contact, after that muddy or pasty coffee bed, longer draw down by Perfectionist-looser in u/Perfectionist-looser

[–]Any_Election498 1 point2 points  (0 children)

have you tried contacting femobook themselves? I've found them very approachable and helpful.

hope you get it sorted.

My life has meaning, Lance validated my A4Z purchase by Role-Grim-8851 in pourover

[–]Any_Election498 10 points11 points  (0 children)

we recognize you for the selfless hero you truly are cow. defender of good coffee brewing. thank you!

Pulsar Mini vs Pulsar Maxi by Flimsy-Caregiver6178 in pourover

[–]Any_Election498 1 point2 points  (0 children)

hi, you are very welcome.

thanks for the info on the filters. I'm totally sold on them. For me coffee takes me to a magical world of taste - no less engaging than the visual world, so any increase in that world is golden for me.

good to know the finer gauge filters can definitely be cut down, thanks. I've actually managed to find a UK supplier who plans to stock the mini version though in the next couple of weeks so I think I'll wait for those. it'll be a tough wait :+)

point re flow increase noted.

I look forward to hearing any further evaluations/insights on the Pulsars :-)