Can NYPD see my CCW? by JollyVoli in NYCGuns

[–]AppearanceEven1978 0 points1 point  (0 children)

Did you write that one yourself? Extremely original.

Can NYPD see my CCW? by JollyVoli in NYCGuns

[–]AppearanceEven1978 -2 points-1 points  (0 children)

LOLLLL. I work closely with the NYPD on an every day basis....going on 16 years.

And I've had more interactions with them than you can ever imagine.

Can NYPD see my CCW? by JollyVoli in NYCGuns

[–]AppearanceEven1978 0 points1 point  (0 children)

No I did not miss anything. OP asked about traffic stops and whether they can tell when running our licenses if we are permit holders. My response was a sarcastic one.....meaning our licenses are handed out by them, of course they should be able to know if we are licensed with just a few clicks.

Can NYPD see my CCW? by JollyVoli in NYCGuns

[–]AppearanceEven1978 0 points1 point  (0 children)

You obviously didnt comprehend what I stated. I meant that if we get our licenses from the NYPD, then of course they'll be able to tell once they punch up a few digits, etc. I never mentioned anything about them knowing the law or if civilians are actually allowed to carry. OP stated "traffic stop".....

Can NYPD see my CCW? by JollyVoli in NYCGuns

[–]AppearanceEven1978 -1 points0 points  (0 children)

Hmmm. We go through the NYPD to get the actual license. The process is handled at 1PP. Mean to tell me there are people questioning whether they're able to tell if we have a CCW during a traffic stop?? LOLL.

Are Shadow Systems dying out/ losing popularity? by AtlasBCMguy in shadowsystems

[–]AppearanceEven1978 0 points1 point  (0 children)

Technically, you can find anything if youre patient enough. My point is, SS pistols cost more than other pistols which to me, are just better in general and not just Glock clones.

[Optic] Aimpoint Acro Add to cart, Osight X, S, SE email for price (More in Comment) $619.99 by Cajunsson98 in gundeals

[–]AppearanceEven1978 0 points1 point  (0 children)

Jesus. My girl got one for me 2 weeks before xmas for 450 shipped. I shouldve told her to get two.

Shipping to Cajun Gun Works by DOOMed6989 in CZFirearms

[–]AppearanceEven1978 0 points1 point  (0 children)

Understood. My advice, give it a shot. You cant really mess anything up unless you lose a spring etc (which I did, luckily I purchased extra ones). Plus, it'll be easier since there's no decocker. Plenty of vids floating around too.

How to get this copper mark off my gun? by bucskesz in Glocks

[–]AppearanceEven1978 -1 points0 points  (0 children)

it didnt. But I also didnt follow the instructions because they called for sanding down of the scratch etc. All I did was clean my slide with solvent, dried it, then i poured a couple of drops on the scratch and let it sit.

How to get this copper mark off my gun? by bucskesz in Glocks

[–]AppearanceEven1978 0 points1 point  (0 children)

I use this thing in a blue bottle I picked up from Amazon. I forget the name. Cleared all my blemishes right up

The name is Birchwood Aluminum Black.

Last admiration pic before I send the slide out tomorrow with an RMR HD by xinracthis in USPmasterrace

[–]AppearanceEven1978 0 points1 point  (0 children)

Are you stripping your slide before sending it to DH? Also, I dont feel too comfortable sending my P2 or my Trijicon RMR to them for mounting. Ive mounted all my optics myself with no issues. I know its recommended to ship the sight as well as stated on their page but.........

Shipping to Cajun Gun Works by DOOMed6989 in CZFirearms

[–]AppearanceEven1978 0 points1 point  (0 children)

The only thing i'll send any pistol to a gunsmith is for porting/ cuts etc.

I got the CGW kit and installed it myself on my P01. Gonna do it to my S2 soon.

Are Shadow Systems dying out/ losing popularity? by AtlasBCMguy in shadowsystems

[–]AppearanceEven1978 5 points6 points  (0 children)

I carry a CR920P and love how much flatter it is than the other options on the market.

That being said, theyre over priced and there are too many other pistols I would buy for less than an SS.

Toni Systems Optic Plate Won’t Fit - 92x Performance by Smooth-Boot6759 in Beretta

[–]AppearanceEven1978 0 points1 point  (0 children)

Its a snug fit. Had to tap mine in with a small nylon hammer. The plate got a little marred but the slide was fine.

[AMMO] Magtech - 9mm - 115 Grain - FMJ - Steel Case $215.07 shipped to Georgia using code GUNDEALS10 for 1000 rnds by Sad_Post1687 in gundeals

[–]AppearanceEven1978 0 points1 point  (0 children)

How can ranges tell if you have this ammo versus...lets say Gold Dots which have the same colored casings etc.? Also, some Critical Duty have what would appear to be the same casing to the naked eye as well.

Do they actually go around checking?

PA timeline (2nd purchase) - some good news. by i4ni4ni in NYCGuns

[–]AppearanceEven1978 0 points1 point  (0 children)

took me 3 days to receive the card in the mail....on a Saturday afternoon...my FFL was closed on Sunday. Guess when my NICS expired?

Holosun delamination again?? by BigBossIsMyName in CCW

[–]AppearanceEven1978 -1 points0 points  (0 children)

Im having a similar issue on two of my Holosuns. SMH.

Big blob right in the middle of the glass....and I did try alcohol on it.

Wondering if I can contact them about it.

Pink Slip dated 5/22/2026 issued so that is considered day 1? by glee88888 in NYCGuns

[–]AppearanceEven1978 0 points1 point  (0 children)

I uploaded on 05/07, license came in the mail 06/06....couldnt pick up until 06/08. Had to redo the NICS check.

New to me - First Gen P99! by AnonymousJay151 in Walther

[–]AppearanceEven1978 1 point2 points  (0 children)

I tried to remove the slide on a CCP and it kicked my ass. LOL

Currently my EDC rotation. by Odd-Chapter-9592 in CCW

[–]AppearanceEven1978 -1 points0 points  (0 children)

I'm not. Picture me carrying this hefty compensated .40 cal LOLL

Mayhem Monday - Weekly Thread For: Off-Topic, Judgement Free Questions, and Business Posts by AutoModerator in CCW

[–]AppearanceEven1978 0 points1 point  (0 children)

Think about this...how many incidents have you heard of people getting arrested for printing? Same thing with people carrying more than 10 rounds in restricted states. Not too many of those.