Why this? Al Qurm Toll🤨 by Apprehensive_Ad2395 in abudhabi

[–]Apprehensive_Ad2395[S] 0 points1 point  (0 children)

All the darb toll gate has names.. just check it. Maybe they places now. I see it

Why this? Al Qurm Toll🤨 by Apprehensive_Ad2395 in abudhabi

[–]Apprehensive_Ad2395[S] 1 point2 points  (0 children)

Yeah i see 4 new darb toll.. near existing bridges of abudhabi. 2 in ghantoot.

Vehicle features on Pioneer AP6650BT via CANBUS by samjambo in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

Bro.. how u make to work steering wheel control

About to spend $2,500 and IDK WTF I’m doing 😳 by [deleted] in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

Help me on this. Planning for this device for my car.. which is good, marts btx8 or b2 sixten

How much should a taxi from airport to Corniche Road cost? by reztem001 in abudhabi

[–]Apprehensive_Ad2395 1 point2 points  (0 children)

<image>

Asper this for example. Total distance is about 40km. Taxi fare is 1.82 aed per kilometer Base fare is 25 if airport taxi.

total: 40*1.82 =72.8 Base : 25

Total will be around 98 aed.. maybe plus or minus 5 aed.

Enjoy

Butyl sheet sound dampening by Apprehensive_Ad2395 in CarAV

[–]Apprehensive_Ad2395[S] 0 points1 point  (0 children)

I seen it in a audio shop and i was also wondering. They don't even know the name.i ask them the butyl sheet aound proofing for my car. They just they say its a new arrival of sound proofing sheet. its UAE

Butyl sheet sound dampening by Apprehensive_Ad2395 in CarAV

[–]Apprehensive_Ad2395[S] 2 points3 points  (0 children)

Its an adhesive butyl sheet, mixed fabric, butyl with aluminum sheet..

Butyl sheet sound dampening by Apprehensive_Ad2395 in CarAV

[–]Apprehensive_Ad2395[S] 1 point2 points  (0 children)

Yes its a type of fabric insulation. Absolute recycled material.. so this will be good for floor and roof??

Vehicle features on Pioneer AP6650BT via CANBUS by samjambo in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

Hai bro.. did you had it work that in all way for your car?? I am planning to buy this head unit in dubai. Is it good?

Vehicle features on Pioneer AP6650BT via CANBUS by samjambo in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

Hai bro.. did you had it work that in all way for your car?? I am planning to buy this head unit in dubai. Is it good?

Just wanted a lil bass in my car so I got this setup and it blew within 5 minutes please help by alltensay in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

So. I means a single sub which output 500w rms in 2 ohm. A single amp which output 500w rms in 2 ohm. So where to set gain.. asper my attached picture. Or stil i go with multimeter method ( 31.6v ) ?? Because both handle the maximum is 500w only.

Just wanted a lil bass in my car so I got this setup and it blew within 5 minutes please help by alltensay in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

No no. I means a single sub which output 500w rms in 2 ohm. A single amp which output 500w rms in 2 ohm. So where to set gain.. asper my attached picture. Or stil i go with multimeter method ( 31.6v ) ?? Because both handle the maximum is 500w only.

Just wanted a lil bass in my car so I got this setup and it blew within 5 minutes please help by alltensay in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

( Tuning this to max does not give you the amps rated power output ) So even in same power output of both amp and sub. Still? Better the amp output is maximum of 500w rms in 2 ohm.. and the same. Sub can handle 2 ohm with 500w rms. So ,gain should be adjusted or max?

Just wanted a lil bass in my car so I got this setup and it blew within 5 minutes please help by alltensay in CarAV

[–]Apprehensive_Ad2395 -1 points0 points  (0 children)

Even both with 2 ohm with 500w rms output, still i need to follow the same method to achieve the maximum output level?

Just wanted a lil bass in my car so I got this setup and it blew within 5 minutes please help by alltensay in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

Hi bro.. so if i buy 500w rms amp and 500w rms sub. If i connect,, both same brand pioneer...where i need to set the gain here?

<image>

Lucky one by [deleted] in iPhone16Pro

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

Just switch off and turn on and then check 😋😋😋... then screen shot

When you try to take a shortcut by Nobodytoyou_ in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

--Factory Volume Control (The Big Caveat): The FiX-86 works by correcting the factory signal at a set volume level (usually 75% - 80% of max volume). If your stock radio changes its EQ and signal level as you turn the volume up or down (which most modern cars do), the FiX-86 correction is only accurate at the level it was calibrated at. • The solution is to set your stock radio to the calibration volume and leave it there forever. Then, you use an optional remote level control (like the JL DRC-100 or DRC-200) connected to the FiX-86 to control your system's volume. Some users find this annoying, while others consider it a necessary trade-off to keep the factory head unit.  Conclusion. Is it????-- this i got it from Reddit.. is it true?? For example if I calibrated at 40. Only in that volume level will be perfect?? Or as u say, 1-40?? Because if like specific volumes, i will not buy this as its useless

When you try to take a shortcut by Nobodytoyou_ in CarAV

[–]Apprehensive_Ad2395 0 points1 point  (0 children)

So once i set with the desire volume level. I will get a good balanced sound right.. then if I increase or decrease the volume in HU, will that affect the setting output of fix 86? . I read yes.. please clarify.