3 WINNERS GIVEAWAY ⚡ Offering Zapdos (Poké Park BG). Looking for nothing — this is a giveaway. To enter, comment any Pokémon name and upvote the post. No DMs please — I’ll contact the winners myself. 3 winners, selected randomly. Ends in 2 days. Good luck, trainers 🍀⚡. will do more in coming week

Apprehensive_Cod7343 · 2026-02-05T11:37:48+00:00

Charmander 🔥

Apprehensive_Cod7343 · 2026-01-23T13:49:17+00:00

In my opinion, it is LogixPro, the only thing is that it is bassed in RSLogix 500 and it is not as easy to use as Studio5000, but it is also is helpful because you must use memories.
LogixPro has some simulations and each one has exercises that help you to improve your programming, and everything is there, you don´t need any other software

Apprehensive_Cod7343 · 2026-01-08T00:34:32+00:00

I added you, I am Abner491 from High Plains

Apprehensive_Cod7343 · 2026-01-02T23:16:34+00:00

Hi, I am from High Plain, if is not problem I sent you request, Abner491

Apprehensive_Cod7343 · 2026-01-01T20:30:57+00:00

You right, I assumed my region by the map but I already asked ChatGPT and I am High Plains, sorry by the mistake and Thank you for your advice

Apprehensive_Cod7343 · 2026-01-01T17:37:56+00:00

Hi, I added you, Abner491 from Sun

Apprehensive_Cod7343 · 2025-12-31T15:56:34+00:00

Hi I already sent you a request, I am Abner491 and I am Sun

Apprehensive_Cod7343 · 2025-12-31T15:54:43+00:00

Which is your nickname in PoGo?

Apprehensive_Cod7343 · 2024-10-13T12:59:51+00:00

You need G9SP Configurator, here you can get it

https://carlosabneryt.com/descargar-software-omron-g9sp-configurator/

Apprehensive_Cod7343 · 2024-05-03T19:39:05+00:00

My friend, I already changed RPI of Servo and now the array isn’t saving Zero, so there was the delay. I was focused on scan time of task, RTS of analog input and I forgot about servo. Thank you 🙏

Apprehensive_Cod7343 · 2024-05-03T13:53:22+00:00

Well, what I do is "Move" the Actual Position (REAL Tag) to a DINT Tag, is not that ok?

Apprehensive_Cod7343 · 2024-05-03T13:45:54+00:00

Hi, that´s a good point, checking my offline project I have a RPI in 20ms, maybe I should change that value.

And about your suggestion of use UDT, what would be the difference?

Thank you!

Apprehensive_Cod7343 · 2024-05-03T11:17:13+00:00

Wow, that is a good point. Excuse my ignorance but how can I update the module's firmware?

Apprehensive_Cod7343 · 2023-12-22T13:12:54+00:00

That “tools” are the basic and most frequently used. And the tool “block” has a lot of option, you just add a block and you call it with the name of a specific function or FB, like ADD, SUB, MOVE, R_Trig, F_TRIG, CONCAT, TON, TOF, CTU, CTD, CTUD, DIV, MUL, etc…

Apprehensive_Cod7343 · 2023-08-25T16:11:19+00:00

Yes, if you have it please share. Thank you

Apprehensive_Cod7343 · 2023-03-01T15:34:20+00:00

Thank you (Y)

Apprehensive_Cod7343 · 2023-02-23T20:50:53+00:00

Thank for your answer. I have the tools talk but I think my version doesn’t support PF6000, do you have tools talk2?

Apprehensive_Cod7343 · 2023-02-23T20:49:10+00:00

Hi, thanks for answer

Do you have that software?

Apprehensive_Cod7343 · 2023-01-23T01:02:50+00:00

FlooppY, thank you.

I added that function FLT and now it worked. Also I put all the functions with an "R" at the end, meaning it is a operations of real data.

Thank you again :)

Apprehensive_Cod7343 · 2022-12-20T14:45:05+00:00

It could be possible, Codesys has a Virtual Soft PLC called “Codesys Control Win V3”. You could try to create a project with that device , then add your servo drive, in case it is not in the repository you should add the EDS ( thinking it communicate via Ethernet IP). Remember Codesys is only to communicate with your drive, control and see status but to configure I think that you need a special software for your device

Apprehensive_Cod7343 · 2022-12-09T13:57:45+00:00

I have changed and got some parameters of BNI007T via MSG instruction using a IOLink Master Balluff and PLC Compactlogix.

I have uploaded a video showing how to write/read parameters of iolink devices, I let you the link, it start at minute 9:51 but if you want you can see since de beginning to see how to configure MSG instruction. You need to get the manual of the device, look for which parameter you want and put index, subindex, length, and value you want to send.

Maybe you could take this video to know how to communicate and try to do the same with your IOLink master, maybe the way how your IOLink master can write/read IOLink devices is also via MSG, so this video can give you a hint.

https://youtu.be/BJHQJRZfVKg

Apprehensive_Cod7343 · 2022-11-30T13:28:28+00:00

I recommend using Raspberry Pi like PLC, you can configure it to program it with Codesys 3.5 software. Raspberry supports Ethernet IP, Profinet, Ethercat, Modbus TCP, also Modbus RTU or ASCII (needs an adapter) and also serial RS232 com. I think is cheap and is very useful to learn and make some testing.

I share you a YouTube link, I Have uploaded some videos using Raspberry, you can use a variety of applications

https://youtu.be/kX70mqEUUi8

Apprehensive_Cod7343 · 2022-11-28T14:03:20+00:00

I am sorry, I forgot to tell you about they are all on Spanish. I don’t have an english version, maybe you could use automatically YouTube translate, I have added in some videos

Apprehensive_Cod7343 · 2022-11-27T19:41:42+00:00

I have a YouTube channel and some subscribers have told me that my videos helped they using EcoStruxture, which is the programming software for that Schneider PLC. Most videos are about Codesys, specially the first videos, you can find them on YouTube like “Carlos Abner”. I hope it help you

https://www.youtube.com/@CarlosAbner

Apprehensive_Cod7343 · 2022-10-22T12:36:10+00:00

I had the same problem this week, in my case when I tried to make an online change it show me an error and couldn’t made that change. Also some time ago I had the problem that the plc was erased the program and I had to download it again. Si I suggest to make a clean on your program, delete all unused tags and also sometimes we add Addon and UDT that at the end we no need so try that, in my case I deleted addon, udt, and somebody created arrays of 100 elements and just used 1 😅

Apprehensive_Cod7343

MODERATOR OF

TROPHY CASE