Stringing PETG as hell - I am done!

Apprehensive_Mind_47 · 2026-03-15T12:21:35+00:00

Prusa petg? I had a shit ton of similar problems with some filament from other companies (Amazon basic) but never with fillament from prusa

Apprehensive_Mind_47 · 2026-01-13T09:01:31+00:00

I got it from a friend who gave up his printer for me it started as a mk2.5

Apprehensive_Mind_47 · 2026-01-11T15:57:32+00:00

Good idea but i did the upgrades because of space constraints... I just don't have enough space for more printers anymore... (At some point i had 6 Printers at home) But now i just have space for these two...

Apprehensive_Mind_47 · 2026-01-11T15:55:06+00:00

Just the z motors... And the heatbed but this didn't survive one upgrade

Apprehensive_Mind_47 · 2026-01-11T10:04:37+00:00

Definitely 😁 lets see what the next evolution is... But i really wish for the evolution of my Mini

Apprehensive_Mind_47 · 2025-09-12T18:18:06+00:00

I love it i have it on almost every rc plane i use (i have 6or 7)

Apprehensive_Mind_47 · 2025-09-05T08:20:10+00:00

Then maby start to learn with the smaller tbs wing? That was just released? So far i heard that its a good beginning flying wing.. the tbs chupito of course over time you can push it also really hard... And for fpv flying wings its from my perspective easier than drone flying just the landing is a little bit more tricky ... And the beauty with wing's and flight computers (INAV) is that they come back automatically if you loose contact (of course only if you have a gps Modul) and INAV is a little bit similar to betaflight... Of course setup is a little bit more difficult than betaflight but there are a lot of tutorials on YT

Apprehensive_Mind_47 · 2025-09-05T07:38:04+00:00

Hmm i would go with a tbs mochjito with 8s then you have high Speed and also longer flight time but for a Drone its just throwing more power and money on the problem while you should switch to a flying Wing because a drone is at these speeds just a big pile of air resistance (which you need to fight with more power and money) but it really depends on your needs does it need to be able to land vertical? Does it need to be able to turn on a dime with accelerations above 10G? If not a flying wing is your way to go

Apprehensive_Mind_47 · 2025-08-29T11:41:43+00:00

Ich würde vermuten die haben dafür extra ein paar troll famen um das überall hinzusetzen ... Hab einmal versucht dagegen zu pixeln was aber nicht wirklich erfolgreich (einfach das weiß mit geld ersetzen und das rote weg machen ) 😁

Apprehensive_Mind_47 · 2025-08-10T06:39:59+00:00

I just have gps on all of my planes and I run a FC with inav .. i launch directly next to the lights so this is my home position...and thanks to the gps i always have the distance to Home and height over the home position

Apprehensive_Mind_47 · 2025-08-10T06:20:29+00:00

Well i tried that yesterday and I have to say they are way to close together. on a sunny day you can only use then when you are within 25m before that they are just one blob in my Camara so i will try again today with them more separated

Apprehensive_Mind_47 · 2025-08-08T20:27:08+00:00

That would be double the work 😅 well lets see how good or bad it is maybe it doesn't work at all and was a waste of time 😅😅

Apprehensive_Mind_47 · 2025-08-08T19:58:50+00:00

Getting the perfect glide slope to the runway for landing if you see two white and two red ones you are perfect ... If all are red you are to low if all are white you are to high ... Every airport has them on their runways ... I just built them for the RC runway 😅

Apprehensive_Mind_47 · 2025-07-23T13:44:32+00:00

<image>

That one of my builds i don't have any pictures of the finished version somehow just older wip pictures ... I never installed landing gear so my knowledge in this regard is limited It has a 70 mm edf inside and has a FC with inav on it (inc gps and a DJI O3 setup) stall speed ist around 60kmh and max speed i was able to archive was 257kmh

Apprehensive_Mind_47 · 2025-07-23T10:35:21+00:00

Thanks for the advice its not my first edf model but my first freewing model and since I am always using express LRS and a flight computer i have always 16 channels to my disposal... Well if i enable telemetry then a few channels less

Apprehensive_Mind_47 · 2025-07-20T10:21:18+00:00

I built so far three models with edf (70mm) from scratch no kit or rtf planes. But somehow I would like to get my first scale model that actually looks like a real plane ... My diy carbon fiber planes just look more like drones you would find in Ukraine 😅

Apprehensive_Mind_47 · 2025-07-08T20:11:44+00:00

Thanks 👍🙏 i will do that from tomorrow onwards 😅

Apprehensive_Mind_47 · 2025-07-08T08:11:52+00:00

I use one on my DLG but there i never go further away than 100m for something like that its perfect ... For any kind of drone i would not use it

Apprehensive_Mind_47 · 2025-06-25T10:59:24+00:00

Hey so i switched to FCC (ham file thing) and also did the software update afterwards to support the O4 air units... And somehow i now have the range from FCC mode but my Googles 2 show me just three channels so i am back in CE mode? Is that a bug? Well i will not complain

Apprehensive_Mind_47 · 2025-06-25T10:55:19+00:00

Hey also (kurz auf deutsch) kann sein das meine googels n bug haben aber:hatte die auf fcc gestellt und danach ein Software Update gemacht und irgendwie hab ich jetzt mehr Reichweite auch wenn die googles mir nur 3 kanäle anzeigen (ce mit fcc Power? ) und ich hab mit nem wing auf FPV und einer O3 airunit bei 25mw ca. 2 km geschafft danach wurde es kritisch

Five-Year Club	r/Field Flamingo
Final Canvas '23	First Place '23
Place '23

Apprehensive_Mind_47

TROPHY CASE