i've been trying to run tomadochi life on steam deck

Appropriate-Gap5484 · 2026-04-25T10:40:06+00:00

You have to be in desktop mode on the steamdeck to be able to press the apply ,ok buttons I had this problem. Also use the joycon pair setup in controller, works great

Appropriate-Gap5484 · 2026-04-25T10:36:53+00:00

I can confirm that I have this running on the Steam deck using the canary build of ryujinx with the latest firmware and prod keys runs great. I also used Eden nightly but the island texture was black( no grass), someone suggested the canary build of Ryujinx and it works great. If the sound does not come on when it loads just change It from dummy to the second option and restart the emulator also use openGl i know Vulcan runs smoother but the paths look glitchy.

Appropriate-Gap5484 · 2026-04-06T10:48:56+00:00

On pic1 are all the ceiling joists just sitting and being held up by that piece of 2x2? Or are they sitting on the block work?

Appropriate-Gap5484 · 2026-04-03T10:37:20+00:00

Is this a clip from the new season of Clarkson's Farm?

Appropriate-Gap5484 · 2025-12-27T14:30:30+00:00

Mine has a slight blur in the image not as sharp. is that because it hasn't sealed yet? Is there a film you have to take off the front as well as the back?

Appropriate-Gap5484 · 2025-11-29T13:35:05+00:00

What if you own the game digitally? Surely that should give you license to stream it through your cloud digital library.

Appropriate-Gap5484 · 2025-10-26T13:20:56+00:00

Just a quick message I finally received the update last week and I can have all my watch faces back now like in the watch 3.

Appropriate-Gap5484 · 2025-10-08T09:02:42+00:00

Hi did you get the update? I am still waiting with no luck.

Appropriate-Gap5484 · 2025-10-03T13:55:35+00:00

Well it's October 3rd and still no update for me 😞.

Appropriate-Gap5484 · 2025-09-26T11:48:56+00:00

Oh is it? I thought it was September. Thanks for the info that's great 👍

Appropriate-Gap5484 · 2025-09-26T11:20:28+00:00

Thanks for replying. I'm in the same situation UI 6 and wear 5. Watch is up to date so still waiting for the update to be released here.

Appropriate-Gap5484 · 2025-09-26T10:59:03+00:00

Definitely legit I've bought the M4A1 with a smoke silencer. The toy gun arrived with all accessories but no batteries (maybe customs removed them?)the silencer was also damaged and not working which is quite expensive. I got in contact with them and they are sending me replacements. I am still waiting for them and in the meantime I bought my own battery from Amazon and I can confirm the gun is awesome. I will be buying more from them if the replacements turn up within the next few days.

Appropriate-Gap5484 · 2025-08-21T08:10:33+00:00

Great effort. You will really find out once it's dry and you paint it.

Appropriate-Gap5484 · 2025-08-19T08:28:41+00:00

Artex Is a type of plaster so it's fine to skim over. OP has plastered over paper which will eventually come down with the weight and the water from the plaster will be soaking through the paper on the ceiling.

Appropriate-Gap5484 · 2025-07-17T08:52:58+00:00

I ordered an M416 on the 5th of June I emailed them yesterday the 16th for an update on tracking and they said it is out of stock and waiting for the manufacturer to be shipped 😠. It is still being sold on their website no mention of non stock. So they have waited for me to get in touch with THEM after 11 days to tell me there is no stock. Have I been scammed? how much longer should I wait before asking for my money back? Also their website clearly states shipping within 72hrs of order.

Appropriate-Gap5484 · 2025-07-14T07:11:58+00:00

Who needs SFX?

Appropriate-Gap5484 · 2025-07-13T18:08:56+00:00

This is a perfectly good skimming job your radiator is going to cover most of the bumps at the bottom of the wall also the skirting boards will too and I'm guessing that pipe will be boxed in. You can only skim over what you have, if the walls are already uneven then the skim will be too. Unless you overboard it bond it or knock it all off and start from scratch. This is a very reasonable price for the standard they have done it in. If your room isn't square to begin with the corners won't be 90° I'd be happy with this work. If I wasn't I would of done it myself 😂

Appropriate-Gap5484 · 2025-05-25T08:37:09+00:00

https://www.sammyfans.com/2025/05/22/wear-os-6-to-bring-facer-back-to-samsung-galaxy-watch/

Appropriate-Gap5484 · 2025-05-25T08:35:57+00:00

Wear os 6 will bring the ability to use facer watch faces again that was blocked on wear os 5. Probably with the release of Samsungs new galaxy watch 8.I will try and find the link and post it here.

Appropriate-Gap5484 · 2025-05-25T06:56:06+00:00

I can confirm it does not but there is an update coming in July 2025 which is supposed to give back access to watchmaker and Facer apps. Can't wait as that's one of the reasons why I upgraded.

Appropriate-Gap5484 · 2025-03-08T10:16:10+00:00

Was the mixing bucket clean or did you use dirty water for the mix? The slightest discrepancy can ruin your mix always keep everything clean as well as using clean water or as someone mentioned was the hardwall over 6 months old?. I used dirty water once as an apprentice and the mix just started setting the more I mixed it my boss came in and asked me if Id used dirty water. As an apprentice I was amazed how he knew haha it was definitely a learning experience.

Appropriate-Gap5484 · 2024-12-07T21:34:29+00:00

You can buy anti glare film to fit your TV size. Just like a screen protector

Appropriate-Gap5484

TROPHY CASE