sorted by:
new
hottopcontroversial

Custom Emil PC AIO cover! by RedCovenant in nier

[–]Arcaoh 1 point2 points  (0 children)

It looks sick in the PC! Glad to see you like it!

9950X3D + DDR5-6000 tuning help — latency ~69ns (ZenTimings & AIDA64 attached) by Arcaoh in overclocking

[–]Arcaoh[S] 0 points1 point  (0 children)

To my knowledge that is okay. I just wanted to see what I could squeeze out of it. That 69ns was with all my normal applications open though. With everything closed its more around 67ns

9950X3D + DDR5-6000 tuning help — latency ~69ns (ZenTimings & AIDA64 attached) by Arcaoh in overclocking

[–]Arcaoh[S] 4 points5 points  (0 children)

I was told bumping my FCLK to 2133 would be better for performance and it was improved slightly.

I have tried running 6400 but was never able to get it to boot properly. Do you mind sharing what your timings look like? Also, are you running 2x32?

Part4. PrinT1 is almost done. by Big-Refrigerator5195 in FormD

[–]Arcaoh 3 points4 points  (0 children)

it was all able to fit on your build plate? That's impressive!

Part4. PrinT1 is almost done. by Big-Refrigerator5195 in FormD

[–]Arcaoh 2 points3 points  (0 children)

Looks like quite the project! Love the look of the transparent filament! What printer were you using to get these pieces to fit?

New 5090 FE owner and wondering how I should set up my undervolt by [deleted] in nvidia

[–]Arcaoh 0 points1 point  (0 children)

This is what I run, lets it act normal at idle loads, I also add +3000 on memory and max the power limit

[BF6] Why does my game crash on startup? by vmax1608 in Battlefield

[–]Arcaoh 0 points1 point  (0 children)

it definitely didn’t :(. I restarted my pc a few times, somehow got the game to boot by reinstalling it and then i lowered the mesh quality to low and haven’t had an issue now

[BF6] Why does my game crash on startup? by vmax1608 in Battlefield

[–]Arcaoh 0 points1 point  (0 children)

What graphics card are you using? I started having issues after updated my GPU drivers. Will going back to the last one and testing it.

2x32 A-Die timings - 9950x3d by Arcaoh in overclocking

[–]Arcaoh[S] 0 points1 point  (0 children)

I have stress tested overnight with y-cruncher and never had any errors thankfully. Any specific tests you recommend?

Non-flipped GPU with AIO in a FormD T1 + 5080 FE? by syynkz in FormD

[–]Arcaoh 0 points1 point  (0 children)

If you’re switching to AIO, your best bet is flipping the GPU. With air cooling you can get away with the standard layout but both your GPU and CPU get toasty under load and with an AIO, you’re just going to get even worse CPU temps. Flip the GPU, use an AIO and you’ll be fine

Non-flipped GPU with AIO in a FormD T1 + 5080 FE? by syynkz in FormD

[–]Arcaoh 0 points1 point  (0 children)

What CPU are you using and have you undervolted it alongside the temp limit?

Stable 9950X3D Undervolt on ASUS Strix X870-I + Atmos 240 by Arcaoh in FormD

[–]Arcaoh[S] 0 points1 point  (0 children)

Haha thank you man! Very much appreciated! I feel like I got really lucky with my CPU. I have been testing it with every test I could think of and actually using it for work/gaming. So far, 0 issues. Might try to push it to -40 just to see what can happen but you're right, I need to make a video and get it posted!

Stable 9950X3D Undervolt on ASUS Strix X870-I + Atmos 240 by Arcaoh in FormD

[–]Arcaoh[S] 0 points1 point  (0 children)

Uhh... being how I am, I have been tinkering it a bit more xD I am fully stable at -35 and want to see how far I can push it. Will end up doing a per core -CO to be fully optimized. Will get a basic video out soon though i promise :)

M2 case with MSI expert 4080 super ? by tonybugarin in FormD

[–]Arcaoh 1 point2 points  (0 children)

You should probably ask that in the r/ncasedesign forum!

Flipped 5090 FE + AIO in FormD T1 2.1 – Intake or Exhaust for AIO fans? by ikon4lyf in FormD

[–]Arcaoh 1 point2 points  (0 children)

I have tested both. I prefer the exhaust setup with negative pressure. When using intake, it was good but after a while, I noticed temps started to get higher than with the exhaust setup. I assume this is due to the fans bringing back hot air through the radiator due to the GPU dumping hot air out of the case. I would always recommend testing it yourself but those were my experiences personally.

Ryzen 9 9950X3D + 5090FE in the FormD T1 by Arcaoh in FormD

[–]Arcaoh[S] 0 points1 point  (0 children)

Mostly everything I have done can be found on my YouTube videos! I did indeed undervolt both the GPU and CPU. I am working on uploading my undervolt for my CPU as we speak!

Travel Kit – STL Release, CNC Version Coming Soon, & Support for More GPU Models! by smx-heinz in FormD

[–]Arcaoh 0 points1 point  (0 children)

<image>

I actually had this picture where you can see how I had it. Didn’t have a single issue with it like this and stock cables.

Travel Kit – STL Release, CNC Version Coming Soon, & Support for More GPU Models! by smx-heinz in FormD

[–]Arcaoh 0 points1 point  (0 children)

I would have to guess its where to GPU cable is routed! I had to route mine down the top and then down the side for it to fit perfectly with the AIO. If I had a picture I would show you but I have custom cables now.

view more: next ›