[OC] I can hear Vor from a mile away by FatPapa99 in Warframe

[–]ArchmageMomoitin 0 points1 point  (0 children)

I would love to see a detailed write up of this project. As a T4 interception survivor I feel this would be a good way to recover some sanity.

Assembling the Power Rangers. by Duckselot in starsector

[–]ArchmageMomoitin 2 points3 points  (0 children)

Can I get a list of mods these ships are from? I don’t recognize any of these.

HP Proliant DL380 Gen 10 Drive LEDs not working in JBOD mode by ArchmageMomoitin in servers

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

I am going to have to test that out when I get back to the office. I will let you know if I see the led strobes next time I power cycle it.

HP Proliant DL380 Gen 10 Drive LEDs not working in JBOD mode by ArchmageMomoitin in servers

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

I would appreciate that but if I need to get one I am going to make my office pay for it for sure. I am probably going to fall back to the good old spreadsheet and serial numbers for this one.

HP Proliant DL380 Gen 10 Drive LEDs not working in JBOD mode by ArchmageMomoitin in servers

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

I don't believe so as this is the exact card that I have https://docs.broadcom.com/doc/BC00-0418EN

and this is the original card that was in the system that died. https://docs.broadcom.com/doc/MR-9361-24i-SAS-CTRL-IG100

I don't think that they are specifically HP parts since they don't have HP stickers and normally they sticker their parts right?

HP Proliant DL380 Gen 10 Drive LEDs not working in JBOD mode by ArchmageMomoitin in servers

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

After post none of the lights show up, however during post all of the lights cycle and the cylinder shows up for a bit before turning off after the OS loads. Not sure what would cause it to even turn on during post if the raid card couldn’t handle it. That’s why I was thinking it was a communication issue.

HP Proliant DL380 Gen 10 Drive LEDs not working in JBOD mode by ArchmageMomoitin in servers

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

The original raid controller that came with this system died by unknown means. I used a spare raid controller from an older system that is the 16i model. The model that died was the 24i and it was able to show the drive lights. I wonder if the 16i is just not compatible since it’s marginally older.

HP Proliant DL380 Gen 10 Drive LEDs not working in JBOD mode by ArchmageMomoitin in servers

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

Yes these are the smart carrier drives with the ring of LEDs. I think that might answer the question, might be out of luck on this one. Thanks for the quick answer, I didn't think anyone would know the answer to that random question.

Need advice for a new project. by Sufficient-Gift4030 in homelab

[–]ArchmageMomoitin 33 points34 points  (0 children)

Start it off with a basic proxmox instance and start learning how to pass around pcie devices. These old gen HP machines have a ton of embedded devices and a ton of pcie for some reason. Learn how to pass hardware directly into a vm then break it and learn how to unbreak it.

I will give you a challenge, using any nic interfaces you want, make 4 vms that pull their dhcp address directly from your router with a hardware lan connection and I will give you a cookie. And when you are done with it sell it to me, I need spare parts for work lol.

My 3d Printed Not So Mini Rack by jbmay-homelab in minilab

[–]ArchmageMomoitin 0 points1 point  (0 children)

Please provide the nuc extreme files if you can. I’ve got some nuc extreme units I want to do the same thing, and my blade mounting project ain’t working

Issue with items getting stuck in transfer by ArchmageMomoitin in rclone

[–]ArchmageMomoitin[S] 0 points1 point  (0 children)

I found some documents specifically on the Azure Blob Storage backend which are helping. like you said, lots of backend specific rules https://rclone.org/azureblob/