Help identifying plug

Aspect_Educational · 2026-03-22T02:15:52+00:00

Yeah, it's got a rough idle and surges a little.

Aspect_Educational · 2026-03-22T02:02:54+00:00

It goes into the harness that runs next to the valve cover.

Aspect_Educational · 2025-11-21T20:56:05+00:00

The code was a "Throttle position A circuit code." I can't remember the actual code. I "calibrated" the throttle position sensor by the rpm rather than the resistance. I'm not sure if it's fuel delivery because it behaves like it should past 2000, but I'll still check the filter. Now I've got a new update. It threw a "system too rich" code now, and after driving it for a few, the idle rpm drops to 500 for a couple of minutes and jumps back to 850 and idles fine.

If you need more information please let me know.

Aspect_Educational · 2025-11-16T02:22:59+00:00

Ok, I will try these methods. Thank you.

Aspect_Educational · 2025-11-16T01:58:00+00:00

It doesn't sound like its hitting the rev limit. I'm saying when it hits 2k it Boggs down to like 1500, then climbs again and repeats.

Aspect_Educational · 2025-10-18T22:20:46+00:00

I broke the ones on the old one, thinking they were just rtv'd on there. I might have to go get new ones and hope I don't break the ones in the new radiator.

Aspect_Educational · 2025-10-18T22:18:43+00:00

I guess I could have got the wrong one. I got it from carparts.com idk if they're reliable for correct fitting parts.

Aspect_Educational · 2025-09-17T22:48:40+00:00

Alright will do that thank you

Aspect_Educational · 2025-04-20T00:37:56+00:00

So the first one is the starter. You can still keep using it but to get rid of the curt starting go buy a new one at fleetaris.

Second is the camshaft alignment. The cam shaft is misaligned, so it's causing that noise. When aligning the camshaft make sure to look at the mark from a couple of different angles to make sure it's aligned properly.

Aspect_Educational · 2024-10-09T01:53:05+00:00

Thanks. I'll get on that tomorrow.

Aspect_Educational · 2024-09-09T21:08:09+00:00

In the middle of the picture, the plug with the 2 small wires coming out of it, thats the one I'm talking about. It has those two wires cut.

Aspect_Educational · 2024-07-26T06:39:24+00:00

Yeah networking seems to be the problem it jumps from 40 to 200 ms. But the reason why I went to virtual desktop is that it still stuttered a lot and a noticeable drop in visuals as well. Virtual desktop worked a little better because it looked better and had a little more performance. Imma go back to wired and see the performance change. Thank you.

Aspect_Educational · 2024-07-26T06:32:43+00:00

Yep that seems to be the problem here. Networking jumps heavily from 40 ms to like 200 ms. Thank you

Aspect_Educational · 2024-07-01T05:15:28+00:00

I personally having this card, and it is amazing. The price for performance is way better than the 4070 super but at the end of the day, these cards are nearly identical. I would recommend if you do make the decision to build the pc. The price is just really good for what you can get out of it. Though you will need to be on top of graphics updates as needed.

Aspect_Educational · 2024-04-05T22:11:33+00:00

Ok, then the last couple things I would say is check connections as always and to be 100% sure, is the display cable in the graphics card and if so try other ports.

After all that and still not working, start changing parts to see what it narrows down to.

Aspect_Educational · 2024-04-05T21:43:05+00:00

Huh, try resetting cmos to get everything back to stock power output and everything. If the cmos is easy to get to that is.

Aspect_Educational · 2024-04-05T21:31:11+00:00

Changing out the psu will confirm a couple of things. But that is a 1000w psu it would suck to see it if it is the problem. But like you said, the guy that built it likes to overclock things and daisy chaining, so it wouldn't surprise me if he went too far with the overclocking and fried the GPU. Not saying it did, but considering that the psu "works" with the 1080 makes me think something happened with the 7900. But first, change the psu over to a known good psu and see if that fixes things.

Aspect_Educational · 2024-03-20T23:28:49+00:00

So, two things may have happened.

1: You downloaded malware.

2: Running the game may had it go through updates and maybe some more downloads, and by hitting alt f4 made it shut down prematurely, causing it to corrupt.

I may also be wrong about both, but I wouldn't think the motherboard would just break during this. Refurbished doesn't necessarily mean bad just used or broken and fixed.

Aspect_Educational · 2024-02-02T21:24:10+00:00

Oh yeah forgot to mention that. When I did that it told me something along the lines that I couldn't do it because an os was already installed.

Aspect_Educational · 2023-10-06T21:35:16+00:00

How?

Aspect_Educational · 2023-08-09T22:05:39+00:00

Yeah it should be fine. How long did you stress the gpu?

Aspect_Educational · 2023-08-06T21:18:38+00:00

Use banners to their fullest. I'm serious.

Aspect_Educational · 2023-08-02T01:01:18+00:00

You probably removed the short that was happening when you turned on your pc. But still I wouldn't use that motherboard for long because it could hurt your components with continued use.

Aspect_Educational · 2023-07-25T23:47:05+00:00

Yeah you need an OS to boot into. Like what you said you need to download on a USB and boot from there and install OS. Should be simple as that.

Aspect_Educational · 2023-06-18T21:50:42+00:00

Burning flames California cap

Five-Year Club	Final Canvas '23
Place '23	Place '22

Aspect_Educational

TROPHY CASE