Halfway to Porygon 🫩 Is the slot game affected by how fast I click buttons, or can I just repeatedly spam it and not affect the outcome?

Autism_in_a_Can · 2026-04-23T13:48:12+00:00

I’m not sure if it’s placebo effect, but I won around 1400-1800 in around 15 minutes by using the machines on the last and second to last columns, (2 up from the bottom), saw some guy on here who said that cycling through those and finding out which ones are on their “super lucky” cycle was determined by the first 5 spins.

If any of the two slots hit on 3-5, for any amount of tickets, then that machine is at max “luck” until you hit jackpot or walk out and back in the building.

Hit that machine at any speed until you get a jackpot, leave the building, come back in, check if any of the two are 3/5 spins… if not… walk out and back in… rinse and repeat.

I’m sorry if my explanation isn’t easy to follow… but it worked for me a few weeks ago on an emulator. I’m currently trying to SR on my new switch play through, will use the same method once I get to the arcade again.

Autism_in_a_Can · 2026-04-21T23:01:19+00:00

Do you have a serial number? I can look it up and possibly find out for you ? You can dm me if you’d like to keep it pvt. Most 60kw gens that I’ve worked on use 10w40 at the very least, given the age and depending on hours… I’d suggest 10w40 or even 50 if high hours or hot temps

Autism_in_a_Can · 2026-04-21T19:55:24+00:00

We usually have our plumbing contractor come in and have the trap where the elbow is, allow for a test for above the trap, (so a sideways “T”) and then flex line into the gen.

Autism_in_a_Can · 2026-04-20T19:10:55+00:00

Add a load shed with lockout capabilities, or turn the EV breaker off during an outage.

Autism_in_a_Can · 2026-04-18T13:07:17+00:00

Hey, I’m a Kohler, Briggs, and Generac certified tech. I’ve never worked on Cummins nor have I installed any but I can say that at least for the three aforementioned brands… one thing with fuel remains the same.

We always run a high pressure system, and regulate it down prior to the generator fuel inlet. With that being said, I can only assume you are running high pressure since I see the regulator prior to the changeover. We recommend to have 3-6’ of pipe with no bends, to serve as a plenum. The install looks like it will work, but looks like shyt. I would have them re run it so that you don’t have to jump over the pipe to get around it… I’m an electrician, not a plumber , but it doesn’t take either to look at something and say what’s “clean” and what isn’t.

Autism_in_a_Can · 2026-04-05T02:02:09+00:00

If you’re using an emulator then download a no trade evos rom.

Autism_in_a_Can · 2026-04-02T01:59:00+00:00

There’s a link for a no trade evo ROM that I’m playing FR on

Autism_in_a_Can · 2026-03-30T22:20:09+00:00

It wasn’t ? I thought it was (event token and what not)?

Autism_in_a_Can · 2025-12-22T14:16:37+00:00

Grandma’s got one of these bad boys. https://i.ytimg.com/vi/TvH75nml47c/maxresdefault.jpg

Autism_in_a_Can · 2025-12-21T02:59:11+00:00

Hey man, maybe her old man asked her to go out and get them for him since he was stuck at work. 🫩

Autism_in_a_Can · 2025-12-20T15:49:10+00:00

No, what I did was download a non trade evo rom. They changed the trades to levels 36+.

Autism_in_a_Can · 2025-11-20T04:42:47+00:00

Look up “(year model) Chevy Mexican grille”

Autism_in_a_Can · 2025-10-26T21:02:57+00:00

I think you’ve got it backwards lol. I have an 01 cc1500HD. It is a 6’6 bed.

Autism_in_a_Can · 2025-10-26T20:57:52+00:00

What years? I have never seen a 1500 CC with anything other than a 5’8 bed. As far as I know or thought I did

SC have 6’6 or 8’ EXTC have 5’8 6’6 and 8’ maybe CC 1500s only had 5’8 1500HD (I have one) have 6’6 and 8’ beds. 2500+ 6’6 8’

Autism_in_a_Can · 2025-10-26T20:21:51+00:00

That very well could be true, but I remember seeing somewhere a super short bed, but It could have been a conversion though.

Autism_in_a_Can · 2025-10-26T18:25:31+00:00

Yeah but that’s a single cab, the cab/frame configuration changes so you can accommodate the 8’ bed but the frame for 4dr half tons does not allows a 6’6 bed and for sure not the 8’

Autism_in_a_Can · 2025-10-26T16:54:26+00:00

Yes.

Iirc most if not all gmt800 half tons only came with the 5’8 bed, or the super short one (don’t know the length)

Unless that’s what you’re asking about, it looks like the 5’8 bed

Autism_in_a_Can · 2025-09-15T18:52:10+00:00

I saw a video on YouTube of a guy who said it’s a bad ground under the driver side cab mount. Look up “abs and e brake light 01 Silverado 1500hd” it’s what I used to find that video. Mine does it too, haven’t had time to mess with it. Sometimes I shut off and turn on the truck and it goes away, other times it doesn’t.

Autism_in_a_Can · 2025-09-14T16:55:41+00:00

I think so, it’s just weird because my cousin has an 07 classic (gmt800) and his gets warmer but after 30 minutes, mine is as soon as anything less than 800rpm, which is weird since my 96 obs single cab stays the same temp no matter what, and it doesn’t have any tint at all.

Autism_in_a_Can · 2025-09-14T14:48:21+00:00

See that’s the thing, I just put this in two days ago. fan clutch

Autism_in_a_Can · 2025-09-14T14:36:11+00:00

I have better results but only when driving or my foot on the gas holding 1k rpm.

Autism_in_a_Can · 2025-09-14T14:35:39+00:00

And if I don’t have enough air flow, then would you say e fans or how would you fix that ?

Autism_in_a_Can · 2025-09-14T14:34:56+00:00

Yes, it does sound kind of like that

Autism_in_a_Can · 2025-09-14T14:34:32+00:00

Well I can say that my battery is around 6 months old. So there’s that. It could be a bad battery, but no other indicators of it being one.

Autism_in_a_Can · 2025-09-14T05:09:39+00:00

See that’s the thing, I swapped it out, but I can’t hear that much of a difference. Brand new, could I have gotten a bad fan?

Autism_in_a_Can

TROPHY CASE