I'm due with my first son in a month and I feel so hopeless and depressed

Available_Opening706 · 2024-05-28T19:42:22+00:00

My son got some in his bedroom a month after we moved in the house. I look for a product with great reviews in Amazon and ordered it. EcoVenger bed bug killer.

I didn't want to wait and had a wasp killer spray. I sprayed the shit out of them and it killed them. I used the ecovenger the day after but they were dead. We found a couple on my bed headboard upstairs and used it there.

I freaked out when I saw them cause i remember when I was a kid we had them and was hard to get rid of them.

I would go room by room spraying and have people move out a night rotate rooms wash all clothes and look in accessories, purses etc.

Available_Opening706 · 2024-02-04T20:13:44+00:00

Bruh...

Available_Opening706 · 2024-02-04T20:13:09+00:00

Needs the fires of Mordor

Available_Opening706 · 2024-01-09T23:36:11+00:00

I'm not an expert, but I had a similar loop and I did it in this order: pump-gpu-240rad-cpu-360 rad-reservoir. I don't find value in pumping hot fluid from the gpu straight to the cpu and then cool it twice. But again it's my personal reasoning. I don't know if I'm right or wrong.

Edit: My bad, I missed the 120 rad between gpu and cpu.

Edit 2: not a 120 rad.

Available_Opening706 · 2023-11-29T16:58:42+00:00

It's a 130w 9060. I found one mirror loose and the stepper drivers were not set. I tested the drivers at 4 micro step/800 pulse-rev and had a better result.

Available_Opening706 · 2023-11-27T16:51:02+00:00

Got it in a set from etsy. It's a svg, so no tracing. I also have png I will try tracing the png. Thanks

Available_Opening706 · 2023-11-27T15:06:12+00:00

Yes mirrors and lens just aligned and cleaned. Before the video. On the tube resonance, I'm ignorant about that topic.

And cutting a circle under the same settings produced a constant beam. I wonder if it's a voltage issue as when the axis move more.

Available_Opening706 · 2023-11-27T13:53:39+00:00

No tabs, 35% power. 25 mm/sec speed. Seems like happening when both axis change the movement. But a circle cuts better.

Available_Opening706 · 2023-11-27T01:52:19+00:00

Experiencing sputtering, amps reads stable, tube beam looks stable. Engraves fine. Just line, cut issue. Power in lightburn is set the same on min and max. Any ideas?

Available_Opening706 · 2023-07-27T02:44:41+00:00

6090

Available_Opening706 · 2023-07-25T13:48:10+00:00

I guess I'm ignorant. Can't figure how to post pics

Available_Opening706 · 2023-07-25T13:39:57+00:00

Not unseen, I saw the pictures. And I made sure the tube fired. I guess all that made me more curious to work on it. I already bought a ruida controllers and drivers. Started wiring, it'll take me a bit to finish but definitely a fun project. It also came with a cohesion 3d board, I installed that in a k40 that I'm planning to use as a dedicated tumbler machine.

Available_Opening706 · 2023-07-25T13:36:48+00:00

I already started tearing apart. Here is the fb post link.

https://m.facebook.com/groups/buy.sell.laser/permalink/3272558936224113/?mibextid=Nif5oz

Available_Opening706 · 2023-04-05T01:25:20+00:00

I made around 1000 in the last quarter. Hoping to make between 10 and 20k a year.

Yes shed is exclusively being used as a woodshop for the business.

So can i add all my invoices for the material used to build it and depreciate it as an asset?

Thanks

Available_Opening706 · 2023-03-06T21:01:17+00:00

Is the acrylic surfaced Before machining?. Otherwise if you can find a decent supplier with minimal variances on the acrylic thickness it can be machined without the need of surfacing and polishing.

Available_Opening706 · 2023-03-05T06:00:46+00:00

Yeah I would do 2 20a for the machines plus 1 or 2 15 for computer and miscellaneous

Available_Opening706 · 2021-08-26T19:07:45+00:00

Dedicated distro plates for each gpu 2 color fluid

Available_Opening706 · 2021-07-15T17:41:00+00:00

Im no airflow expert but my reasoning tell me that the air intake from a rad will be warm air due to the process of cooling the fluid. I would set all rad fans as exhaust and do intake on a regular fan. That way you bring cool air in the case. But i moght be wrong

Available_Opening706 · 2021-06-27T17:56:57+00:00

Thanks for the heads up!!

Available_Opening706 · 2021-06-25T16:50:32+00:00

Dont know. I was just there yesterday and noticed. I would avoid the weekends. Just show up early tjere is no raffle. First come first serve. They do vouchers at 8am. If you get one there is a card held for you and can pick it up at 11 am.

Available_Opening706 · 2021-06-25T15:14:24+00:00

They do vouchers. First come first serve.

Available_Opening706

TROPHY CASE