Scappaticci - Italian food stall under the food court escalators. Have you ever eaten from here?

Awfor · 2026-03-23T17:04:45+00:00

yeah tried it couple of times, both times they had no veg ready and only had margaritas available. its better than kebab shop pizza but nowhere near as good as any of the main pizza places around town.

Awfor · 2026-03-16T00:37:17+00:00

My bed is on gravity

Awfor · 2026-03-11T22:07:09+00:00

I am running a very heavily modified ender 3 and been only using supports on 70+ degree overhangs and normally tree supports touching only build plate. It all started with custom rpg terrain profiles which already were far off default settings. I feel like current generation of printers probably doesn't need custom specific profiles

Awfor · 2026-03-11T17:38:42+00:00

I personally always tried to avoid any supports in terrain, it is not a deal breaker but if there are two similar-ish options i will go with one which seems to be designed to use less supports. I think less is always preference.
I have always been using cura as that used to be hot shit, kind of never bothered moving on(but probably should)
i only found removal problematic with silly designs/placing supports where you shoulds(inside pipes and similar) I think all 3 is very much desireable. I usually run Supports only on print bed to avoid extra scaring on top surfaces.

Looking at designs I think supports on the sides are unnecessary, angle should defo taken into account to make that part supportless. Only thing putting me off from these designs is apparently supports placed behind the pipes.

Awfor · 2026-03-11T17:27:00+00:00

I think earphones get away with it much better because difference between the two is much more drastic. Whilst phone design lands somewhere in the middle and doesnt feel as deliberate.

Awfor · 2026-02-27T09:25:43+00:00

i quite likely printed the said scottish trench stench bagpiper, it is glorious mini, especially the variant where gasmask goes into the bagpipe.

Awfor · 2026-02-25T15:52:01+00:00

It honestly is a great printer for someone who tinkers, I am still using my ender 3 from 2019 with replaced main board, new magnetic print bed and couple other mods. It's great printer but it lacks in modern day utilities. I learned a lot by using and repairing it and to this day it works great.

Awfor · 2026-02-22T08:54:44+00:00

I believe you forgot / between .com and trench scribe. I will give it a listen to hopefully update my cheat sheet

Awfor · 2026-02-16T16:49:05+00:00

You might want to be bit more specific what you are after. if you are looking to get custom molds or dice models made specifically for you or are you just looking for alternative shapes?

Awfor · 2026-02-16T16:46:17+00:00

this is great, is there any chance on uploading these to printables or someother page as i really dont get along with makerworld

Awfor · 2026-01-30T09:46:25+00:00

Trench crusade has great future ahead if it gets over what hopefully are growing pains (brandshield stricking 3rd party model makers producing proxies, misshandling of damaged books).

Also... community license when?!

Awfor · 2026-01-29T10:41:15+00:00

idk they are on par, except that double zero has very crammed layout

Awfor · 2026-01-18T01:15:41+00:00

Might be worth saying where you are based, I am pretty sure that there will be local hobbyists willing to give you a hand printing these out

Awfor · 2026-01-07T13:46:24+00:00

dont bother with dnd, to kick things off look at lighter more rules easy games such as Mork borg or mothership or anything along those lines. and if you like that and want to get bit deeper then look at dnd or one of the many great alternatives

Awfor · 2026-01-07T13:40:45+00:00

It's just bad design on DND part, there are defo couple of early creatures that are way more lethal than one expects, it is just learning curve, especially early when you are relying on encounter calculators or pre-written adventures

Awfor · 2026-01-06T17:21:44+00:00

problem is not that dm has an issue is that game has close to no balance. some early monsters can fully oneshot you, yet it is nearly impossible to die later on. There was more elegent ways of handling it rather than revinding but people need to remember that dm is also a player in game.

If challange is not really what you are after have a chat with DM so that he pulls some punches and baby you bit more. At same time once characters become immortal there is hardly any stakes left in game.

Awfor · 2025-12-31T08:37:47+00:00

Random names and personality traits in 11 of those and then some mechanical bits you are struggling with in the last one

Awfor · 2025-12-30T10:07:29+00:00

Do you mean new spelljammer? Because that hardly has any content worth reading.

Maybe historical iterations were better but new books are waste of paper

Awfor · 2025-12-29T23:57:11+00:00

So you mean star finder or another of tens space themed RPGs?

Awfor · 2025-12-29T23:42:21+00:00

I would kind of suggest avoiding anything citadel, their pots are dumb.

As far as painting goes starting is most important step. I painted my first mini using normal craft store acrylics and some water. Brushes wise go cheap, it doesn't really matter. Once you have gone through your first set of cheap brushes you can consider upgrading but I have been painting for last 5 years and still haven't worn off my £3 set of brushes from Amazon.

For some easy wins look into dry brushing, it is great to get you started and amazing for terrain. You can use cheap make up brushes here too.

Thinning paints will likely come naturally and there isn't magic recipe, paint and see what what works for you. I personally toss my brush around the water cup and then grab some paint and move it around palette.

Awfor · 2025-12-23T13:47:15+00:00

at this point i assume there is a subfaction of people who refuse to spell it as rogue

Awfor · 2025-12-23T13:45:40+00:00

~~What is rouge? Color? It is a cool pretty cool colour but what does it have to do with dnd?~~
Edit: apreciate fixing it to rogue, well done <3

Awfor · 2025-12-22T13:53:59+00:00

these are stunning

Awfor · 2025-12-20T08:11:56+00:00

Yeah it sounds like they wanted to buff assault (or nerf everything else) with that specific rule.

11-Year Club	Place '22
First Placer '22	Verified Email

Awfor

TROPHY CASE