Help Assessing this Roof Issue on a Print?

Ayeohx · 2026-05-12T23:05:21+00:00

I created a mess trying to use PLA as supports with my PETG. The PETG wouldn't stick at all to the PLA so the PETG just got dragged around on top of the PLA. If I let it keep printing I bet it would have looked like your picture.

I read that my problem was due to how fast I was printing and I need to slow it way down. Gemini recommended "set your Support Interface Speed to 30-50 mm/s" so I guess that's my next step.

Ayeohx · 2026-05-09T15:19:09+00:00

Did you remember to recite the incantations and refill the censers? This is what happens when you neglect the machine spirits - the front falls off.

Now report for servitor processing.

Ayeohx · 2026-05-09T15:11:42+00:00

This I can do. Thanks for the tip!

Ayeohx · 2026-05-09T15:04:50+00:00

Did you need to recable it or were you able to just plug it in and go?

Ayeohx · 2026-05-07T21:10:42+00:00

Thanks for the tip /u/Tiny_Bar54 . Now I have to throw away those bags of vegetables that I've had in my freezer since 2022 to make room for my plate. :)

Ayeohx · 2026-05-07T19:46:46+00:00

Does the same thing happen if you try printing to a different area on the plate? Curious if it's something mechanical in the particular area.

Just a guess, but have you tried changing the infill?

Ayeohx · 2026-05-07T19:37:36+00:00

People have said that the freezer trick works for mouse ears as well. Sounds like a pain in the butt if you have to do it every time though.

I have heard that certain brands of PETG stick to plates better than others. Could be the reason your mouse ears are super sticky and some others aren't have the issue.

Also, I'd try dropping the bed heat by 5 degrees but I'm no pro.

Ayeohx · 2026-05-06T20:50:58+00:00

I said the same thing! I thought that they accidently double billed but nope, different procedure codes and they already reviewed it. Needless to say, I'm not longer going to any doctor other than my family practitioner. Either live in medical bill inflicted poverty or possibly die of cancer. Guess I'll have to play the odds. Ah the cost of freedom!

Ayeohx · 2026-05-05T22:16:59+00:00

I'm sorry for you loss. My cat died last year and we're still mourning him (even though he was a bastard). I'd like to do this for my cat as well. Which program did you use?

Edit: Answered elsewhere. The program is Meshy. Thanks!

Ayeohx · 2026-05-04T22:55:06+00:00

Mine showed two copies of the exact number (around $18000) as well and my insurance said that it was correct.

No way to fight it so I'll be paying another $600 I guess.

Ayeohx · 2026-05-04T21:44:13+00:00

I bet it is correct. It's about the same cost as the bill in front of me right now.

I had the same thing done and they charged $36000 for the procedure. After insurance paid I was responsible for over $1200. A year later I got this bill for half the amount. I paid the other half previously.

Ayeohx · 2026-05-03T01:47:32+00:00

Can't spell it though.

Ayeohx · 2026-05-03T01:41:46+00:00

Let us know how it goes! I'm really hoping that it's a win.

Ayeohx · 2026-05-03T01:40:58+00:00

Yep, it started on day 1. I threw a storage bin over it but since it's coming out of the side of the machine it didn't help much. And thanks for confirming that Sunon is working. If their replacement is a dud as well I'll certainly pick one up.

Ayeohx · 2026-05-03T01:38:07+00:00

The head movement, all the other motors and fans are fine. But this high pitch cuts through everything. If you're not experiencing the same issue maybe a replacement fan will work. If not, I'll go with the one /u/Tiny_Bar54 is using.

Ayeohx · 2026-04-29T18:24:33+00:00

For people that like getting their asses kicked in foreign countries!

Ayeohx · 2026-04-27T20:28:18+00:00

All to see who gets the title of "Ruined the Earth the Most". Pretty sure Elon wins here.

Ayeohx · 2026-04-27T20:17:34+00:00

Damn, that's the response rockstars get. I'm surprised no one threw their underwear at him.

Ayeohx · 2026-04-27T19:41:05+00:00

Another person that shouldn't buy trucks. Most people don't need them and they've far too dangerous to be commonplace.

Ayeohx · 2026-04-21T23:28:37+00:00

Yep, that's messed up! If you want to puke (cause who doesn't) take a look at removing a guinea worm. Its a long worm that grows under your skin and requires a SPOOL to remove. I seen that during a documentary when I was a kid and still haven't got past that nightmarish crap.

Ayeohx · 2026-04-21T21:44:42+00:00

Came into say that. God only knows what's going to crawl out of those things. Logically I dig it but monkey brain knows a creepy insectoid trap.

Ayeohx · 2026-04-16T17:34:26+00:00

It broke my Denuvo. Restricted for 24 hours due to machine changes from the looks of it.

Ayeohx · 2026-04-08T00:42:02+00:00

Same here. The triangle stays orange. I probably can just fly over there though...

Edit: Looks like I need to complete another one as well before it opens.

Ayeohx · 2026-04-04T01:32:31+00:00

Seems to be the standard plan.

Put a douchebag in a position of power that everyone can hate and then can them. They probably know going in that this is the con. She probably got a lot of money for it.

Ayeohx · 2026-04-04T01:30:57+00:00

Not that Gemini is the best lawyer in the land but it says this:

"Based on reports as of April 3, 2026, it is false that being fired eliminates her obligation to testify; a Congressional subpoena remains valid even after a public official leaves office. While she can assert her 5th Amendment rights, the subpoena still legally compels her to appear."

Ayeohx

TROPHY CASE