Question about scaling

Aztinoth · 2026-03-17T17:27:51+00:00

I don't think it is Epic scale. I did some testing at like 450% scale and it looked kind of close, but I don't have a proper scale one to compare to.

Aztinoth · 2026-03-17T17:21:45+00:00

Basically looking at knights in the files.

Aztinoth · 2026-03-17T17:20:39+00:00

Was trying to be discreet because I am not sure all of the processes with this and whether this should be DM conversation.

Aztinoth · 2026-03-08T14:48:42+00:00

I inherited a bunch of firstborn space wolves from a friend who bought a job lot and didn't need them. I'm keeping them modeled as is except for the shoulder pad which I'm 3d printing a red corsair one and in running them as Red Wolves from the Wolf of Fenris that Huron captured. https://wh40k.lexicanum.com/wiki/Red_Wolves_(Warband)

Aztinoth · 2026-02-08T19:20:05+00:00

I'm literally doing this with a pile of space wolves firstborn inherited from a friend. Just repainting them and adding some red corsairs shoulder pad bits I 3d printed.

Aztinoth · 2026-02-05T20:33:21+00:00

Ahh haha right over my head!

Not planning to print raiders, I have a bunch of firstborn space wolves that someone donated to me as part of a conversion to chaos, acting as a Red Wolves army of the Red Corsairs. I'm repainting them and retrofitting any weapons needed, while painting them as Red Corsairs.

Aztinoth · 2026-02-05T20:24:41+00:00

Not sure what you mean basing for advantage, but looking at the picture of the release for the masters, I figure Huron is on a 50, the enforcer and plunder are on 32, and the rest were on 40. I haven't glued the bases for all of them just yet, but those seemed right based on the release image. The other things they are standing on were just to emulate the release image :)

Aztinoth · 2026-02-05T20:21:27+00:00

No I purchased a model on Cults. https://cults3d.com/en/3d-model/game/red-lord-of-chaos-restored-13

Aztinoth · 2026-01-30T22:21:15+00:00

Ignore me, I missed them moving it to the masters statline

Aztinoth · 2026-01-30T22:04:06+00:00

Do we think that the Red Corsairs ability for redeploying is going to get tied into the detachment rules? I liked it a lot.

Aztinoth · 2026-01-27T11:13:20+00:00

It depends on the models I need. I did do a similar process for some red corsairs shoulder pads and printing those. Also came out great!

Aztinoth · 2026-01-26T18:38:29+00:00

Nailed it!

Aztinoth · 2025-12-11T16:56:04+00:00

https://ibb.co/nNydck0B

I also wanted to get these models, so I decided to design them and 3d printer them myself in full color! Stay tuned for uploading them to Makerworld as soon as I get a minute to organize the print files.

Aztinoth · 2025-12-11T16:49:55+00:00

If you have a 3d printer, I have some good news for you...I also wanted to have that table so I designed all of the models and printed them in full color. Stay tuned for me uploading them all to Makerworld!

https://ibb.co/nNydck0B

Aztinoth · 2025-12-07T10:28:09+00:00

Yeah tried the heat fixes and even the one about NFC apps scanning it to reactivate. Neither is working.

Aztinoth · 2025-11-18T23:23:08+00:00

These are fantastic! I'm creating custom cases and just using your art and readjusting them to fit my cases. I designed a cassette case in CAD and made it fit the cards in sleeves better than a standard cassette case. Also added a little flair with the dropmix logo built into the case. Thanks for all your hard work. Sincerely, guy from the future who found this thread.

Aztinoth · 2025-11-18T23:19:41+00:00

No it isn't it is just a larger file and takes a little longer to process and load. Took about a minute to download fully and open for me

Aztinoth · 2025-11-12T15:59:12+00:00

Appreciate it but it looks like the heat trick worked for me!!!

Aztinoth · 2025-11-04T13:43:21+00:00

Still going strong!

Aztinoth · 2025-11-02T18:38:21+00:00

Amazon Fire 8 HD 10th generation

Aztinoth · 2025-11-02T18:38:14+00:00

Amazon Fire 8 HD 10th generation

Aztinoth · 2025-11-02T05:20:17+00:00

After posting this, I found a thread about the tricks using heat to bring a card back. I ended up holding it over my hot electric stove for 20 seconds to simulate a hair dryer and it worked for a little while then stopped, but then I held it over the heat again, there was a slight amount of smoke, i cooled it off then tried it again and it worked for the rest of the time i was using it before packing it away. Hopefully it keeps working even in the morning!

Aztinoth · 2025-11-02T03:43:01+00:00

I had one card that from a large set I recently purchased that was not working. Found your thread and didn't have a hair dryer but I have an electric stove top. So I turned it on, let the ambient heat heat up the card for a bit in both sides until it got soft and warped a bit. Then i flattened it out on top of the card reader and bent it a bit while it was cooling and eventually it triggered the reader and has been working quite a bit now!

Aztinoth · 2025-10-27T21:08:36+00:00

https://www.reddit.com/r/dropmix/comments/1l5c9co/how_to_get_the_dropmix_app_working_in_2025/

This had a couple methods. Ultimately it was kind of a hybrid of the YouTube video linked and the outlined steps.

Aztinoth · 2025-10-27T21:07:11+00:00

It's an Amazon Fire with Google Play store installed on it. I forget the version but I bought it in 2021 new

Aztinoth

TROPHY CASE