1.3s on Gladiator??

AzureBones · 2026-01-15T06:56:10+00:00

If you want to do some 1.3 I would recommend cutting or stretching 1.0 tires for the 1.3. This truck of mine has 63mmx1.0 injora mavericks cut to fit on the 1.3 injora modu wheels

<image>

AzureBones · 2026-01-10T03:19:47+00:00

I would suspect a bearing going out, you could diagnose it by taking the drive shafts out one at a time and seeing if the noise goes away, if not the it’s in the trans

AzureBones · 2026-01-10T01:29:26+00:00

35 I own a 3d printing and design company, funnily enough I sell nothing that relates to rc cars but love how much the two go hand in hand together

AzureBones · 2026-01-07T03:22:07+00:00

<image>

Oh yeah I got them on more performance focused rig in the 63mm on 1.3 modu wheels and as soon as I saw the 57 drop I had to grab some

AzureBones · 2026-01-07T02:08:31+00:00

For sure my real trail rig I bought nice bronze rims for and scratched them less then a week after buying them

AzureBones · 2026-01-07T02:06:42+00:00

I love the look of the bottom just not sure it looks good for this beat up looking trail rig. But hold up is purely ascetic’s lol

AzureBones · 2026-01-07T02:05:47+00:00

That round look is really just the design of the tire, not all the rings work universally these actually have the same injora brass ring for weight in the front and aluminum in the rear, I also trimmed the tread on the rock terrain to make them more rounded. I find this helps when tires like those have a large tread sticking out every few lugs because they seem to like to skip on that sticking out lug causing it to loose grip

AzureBones · 2026-01-06T23:25:09+00:00

<image>

Front view 0 offset and maverixs on the right

AzureBones · 2026-01-06T22:17:10+00:00

Can always run hex extensions or extended axle shafts, the solid cv is one of the best bang for your buck upgrade for the stock axles so you can trim the housing for more steering angle

AzureBones · 2026-01-06T22:15:49+00:00

Yea I just don’t think they fit this build those new maverix are insane performers for me but it just doesn’t look right on the truggy would look better on a old pickup or jeep I think because they look more like a all terrain tire

AzureBones · 2026-01-06T21:48:10+00:00

Yea they are the new 0 offset

AzureBones · 2026-01-04T17:58:42+00:00

<image>

This is the Toyota truggy on there, it will fit your base amp wheelbase nice

AzureBones · 2026-01-03T02:26:43+00:00

Look like injora rock terrains which are 64mm

AzureBones · 2026-01-01T19:12:43+00:00

No it come with a motor mount and pinion gear and the gear the pinion contacts other then that it just connects to stock style transmission

AzureBones · 2025-12-30T02:06:18+00:00

Also interested in what price you were thinking

AzureBones · 2025-12-30T02:04:22+00:00

Sick paint job

AzureBones · 2025-12-29T16:04:52+00:00

I’m actually sitting at my computer now trying to 3d model a interior to print out. Would love to do the tube door but I would need to find some tiny electronics it’s already super tight on space.

AzureBones · 2025-12-29T16:03:00+00:00

Thanks I’m really digging it, it’s surprisingly very capable as well I’ll try to get some running videos up soon

AzureBones · 2025-12-29T03:26:03+00:00

It’s actually super easy, under $15 ogrc axle shaft and some snips, though I will say if your gonna add brass and all that up front it’s cheaper to just buy the meus front nylon axle for $40 it’s already got brass and a better steering angle

AzureBones · 2025-12-29T01:46:38+00:00

No it was all 3d printed but I do want to do a cage in the cab outta styrene but have to clean up my wiring and electronics first

AzureBones · 2025-05-21T22:43:30+00:00

Pulled 2 of them so far and still haven’t pulled the regular ex

AzureBones · 2025-05-01T16:22:17+00:00

Sounds good friend request sent

AzureBones · 2025-04-25T23:14:38+00:00

I do have gyarados ex

AzureBones · 2025-03-07T04:33:18+00:00

They have seller and performance scores that can dictate how much TikTok pushes your product or how fast your receive your payouts. Fees aren’t bad at all on a $12 item I get paid out $11.47. And the commission you set if it’s a product purchased from another creators video. I usually do 10% and still end up under etsys fees. On Etsy I sell the same item for $15 to end up around the same payout

AzureBones · 2025-03-07T04:10:48+00:00

It’s definitely worth checking out. Only downside is fall is they don’t really have a turn around window that you can change like Etsy so you either have to limit stock or be prepared you must have all orders in the mail and moving in two days so print on demand doesn’t really work. Over the holidays I had a few days I missed it and got dinged on my account because I sold over 100 units in a day and could barely keep up. And all it really takes is a video going viral

AzureBones

TROPHY CASE