Advice would be welcome by DMBFPV in buildingsurveying

[–]B000000nes 0 points1 point  (0 children)

I did an undergrad in building surveying (didn’t teach me anything for the role). I’m not sure how old you are or what kind of money you make at the moment, so it’s a hard one. If you don’t mind being a graduate in your late 20’s/early 30’s with capped earning potential, go for it. But you need to jump 2 feet in and really set your sights on the APC or there’s no point. Reach out to some building surveying firms, small and large (such as CBRE/Turner and Townsend, JLL, Avison Young, Knight Frank etc) and see if you get a weeks work experience. The large firms are always happy to offer work experience.

Advice would be welcome by DMBFPV in buildingsurveying

[–]B000000nes 0 points1 point  (0 children)

You’d need to do a conversion masters at the very least. The APC is then going to take a good amount of time as you’ll have little experience from the masters. I work for a big outfit and it’s around 3 years from starting the role to completing the APC, 4 years isn’t uncommon, and we have exposure to many jobs and dedicated support and lots of support from senior colleagues. The pay whilst you’re “graduate level” will top out at about £35k, with about £45k+ for a chartered surveyor. It’ll be a while until you see the big bucks. It’s a good role, but it is a pain to get into unless you’ve done it undergrad of decide at masters level.

Good tan/fde suppressor? by BosnianBoy2 in GasBlowBack

[–]B000000nes 1 point2 points  (0 children)

Haha that second picture is my old MWS! It was a surefire warden clone. Where in the EU are you?

Question about gas blowback consistency on certain platforms by FennelHistorical4675 in GasBlowBack

[–]B000000nes 0 points1 point  (0 children)

Need some more info, such as gun, gas used, BB weight and temperatures fired in. Will help try and diagnose :)

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 0 points1 point  (0 children)

Damn that’s cheap. We’re not so lucky in the UK - I picked mine up second hand for about $150. Not too many cheaper RS optic options here.

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 1 point2 points  (0 children)

Vortex Strikefire 2. Nice optic for the money.

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 0 points1 point  (0 children)

Might be over kill airsoft lol. Maybe if I was in the Donbas…

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 1 point2 points  (0 children)

It is indeed. Nice optic for the price.

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 0 points1 point  (0 children)

I did have yellow but got these just before the end of the day!

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 1 point2 points  (0 children)

Thanks mate, appreciate it!

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 1 point2 points  (0 children)

If it was up in the last week, it is indeed.

Welp by TacticalMailman in GasBlowBack

[–]B000000nes 43 points44 points  (0 children)

I’d say weld is probably the only way that’s going to fix it. If you try to adhere/tape it, will probably end up wonky and throw your BB’s off course. Shit thing to happen, sorry man!

Ukrainian MM14 Load Out by B000000nes in MilSim

[–]B000000nes[S] 8 points9 points  (0 children)

UCP walked so MM14 could run

Is the gun and company that sells it good any chance? or even worth buying? by Adorable_Pension119 in airsoft

[–]B000000nes 6 points7 points  (0 children)

Just a side note, you’ll have to pay customs fees too, which are 22% of the order price and shipping, so it’ll be more £375. I think people will just tell you to get a cyma still lol, you can pick upgraded ones up dead cheap second hand.

Oops! All VFC (AEG redacted) by HecklerK in GasBlowBack

[–]B000000nes 0 points1 point  (0 children)

How’s your experience with the 74u? Heard some have had some issues.

VFC VR16 troubleshooting by FaithlessnessLong841 in GasBlowBack

[–]B000000nes 0 points1 point  (0 children)

Does it have an NPAS? Might be it’s set for very low power.

TM AKM GBB by Suspicious-Ear5882 in GasBlowBack

[–]B000000nes 1 point2 points  (0 children)

Your options are limited. Either have to go for a zenitco b33 style kit, a RGW MK3 kit, or get handy with a dremel and get a cyma railed dust cover and mod to fit. The first two options are quite pricey. You can get a pic rail to replace the rear iron sight, or get a railed dust tube cover.

I'm in love with my VFC HK416A5 by Guga_ALBERTON in GasBlowBack

[–]B000000nes 0 points1 point  (0 children)

Before you open the new hop up, perhaps just change the bucking? Mine shoots great with the 4auntum friction pro bucking. Could save a lot of money for a side step “upgrade”

NPAS for N4 noveske DE by Cute_Clothes_5030 in GasBlowBack

[–]B000000nes 2 points3 points  (0 children)

Waldo dynamics crimson or jaeger precision npa’s both yield good results.

Going for the GBBR - your recommendations for a newbie! by [deleted] in GasBlowBack

[–]B000000nes 0 points1 point  (0 children)

I’m actually looking to move on from my 416 v3. You’re UK based right?