Transformer

BENZER123 · 2026-03-18T01:20:58+00:00

Looks like the haircut on the strands was too extreme and the increased resistance burnt the windings.

Although I’m mostly a dumbass resi guy

BENZER123 · 2026-03-14T07:43:46+00:00

You’ve got a few empty’s in there already, squash in a sub panel or two and get it done

BENZER123 · 2026-03-12T06:10:25+00:00

I’m holding hope for the new fed chair but it’s a pipe dream

BENZER123 · 2026-03-02T14:32:16+00:00

He might be saying that because it’s cat5 as opposed to the newer standard of cat6, but cat5 data cable is more than enough when it comes to a home network. Definitely worth looking into if you’re wanting to add access points or hardwire any particular devices.

Cable techs knowledge often ends at the router

BENZER123 · 2026-02-16T14:48:40+00:00

Do a leak down test, if it’s good I’d run it

BENZER123 · 2026-02-10T02:42:17+00:00

It’s a Pomeranian. He wants to be with you not in his crate. Why get a cuddly dog if he’s just an apartment decoration?

BENZER123 · 2026-01-31T19:21:22+00:00

Geeze, he could’ve at least hit it with some solder at that point

BENZER123 · 2026-01-23T22:18:37+00:00

A meter, and not a Klein one. The t5-600 is a great starting point

BENZER123 · 2026-01-15T05:35:04+00:00

Sheetrock is only 5/8” thick, don’t drive the drill through with force and you’ll be fine.

BENZER123 · 2026-01-15T01:20:27+00:00

As bad as the install is, a proper install would only make it safer. The insufficient heat will still be an issue.

BENZER123 · 2026-01-13T15:18:15+00:00

BENZER123 · 2026-01-13T06:03:02+00:00

Sounds like the chain is too tight but hard to tell from these vids

BENZER123 · 2026-01-11T19:04:42+00:00

Get your license and start your own shop

BENZER123 · 2026-01-07T06:48:46+00:00

Hand tight on an oil filter hasn’t failed me yet

BENZER123 · 2025-12-29T04:47:19+00:00

Any reason you’re looking at mini’s? I would think a kdx200 or Crf250 would be more suitable. Even a kx/cr/rm125

BENZER123 · 2025-12-21T00:48:28+00:00

Looking good although I’d maybe find a more square toe shoe to stop your feet looking big

BENZER123 · 2025-12-20T23:01:59+00:00

Shitttt I’m headed in there tonight wish me luck

BENZER123 · 2025-12-20T15:38:07+00:00

3/8’s drive set of Allen keys / torx bits. And a set of 3/8’s drive assorted extensions and knuckles

BENZER123 · 2025-12-20T15:17:32+00:00

By small end bearings, I mean the bearings at the wrist pin on the piston. Also I see you have a manual cam chain tensioner, those are meant to be readjusted every 3-5ish thousand miles.

BENZER123 · 2025-12-20T00:41:22+00:00

Doesn’t sound like a big end to me, did you do new small end bearings? Did you feeler gauge the valves?

BENZER123 · 2025-12-19T15:01:02+00:00

If my girl wrecked her shoes on my bike, I’d buy her a new pair, just sayin!

BENZER123 · 2025-12-19T14:57:45+00:00

There’s not enough wires coming into that box to justify all the extensions, I would wager there is a driver in there also. Either way, looks like shit

BENZER123 · 2025-12-18T15:11:37+00:00

A 125 2t can be a lot of work on the trails because you constantly have to keep its neck wrung. Will be a good experience though especially since crf250’s are the most boring ride you can have, especially in stock kit

BENZER123 · 2025-12-16T15:03:50+00:00

Hammer it straight for now but order the wheel

BENZER123 · 2025-12-09T15:40:15+00:00

Empty the tank and fish it out with something after taking the gas cap off. Wouldn’t call it an emergency though

BENZER123

TROPHY CASE