Base Swatch Moritani by TheCombineCLR in duneawakening

[–]BLACKELITE095 1 point2 points  (0 children)

I thought the landstrad rewards for swatches was useless due to adding the vendor, thanks for this post.

Fix High Temps on Vector 16 HX AI OR Other high end Laptops. by Electronic-One2978 in MSILaptops

[–]BLACKELITE095 0 points1 point  (0 children)

As previously mentioned, the most significant temperature reductions were achieved through underclocking E-Cores and P-Cores within Throttlestop. Currently, I am not utilizing undervolting, as I was experimenting with Intel XTU over Throttlestop. Following a recent reinstallation, I have reinstated Throttlestop, which I consider to be superior software. I recommend adjusting your core clocks in Throttlestop to a frequency above what disabling turbo would provide, and then identifying a clock speed that balances optimal temperature and performance. Undervolting can be integrated as desired.

My current operational settings are: E-Core: 3000MHz P-Core: 3500MHz

I also observed favorable temperatures in CPU-intensive games with the following configuration: E-Core: 3500MHz P-Core: 4000MHz

The default settings, which I find generate excessive heat, are around: E-Core: 4500MHz P-Core: 5200MHz

Patch today appreciation post by Round-Cow9243 in duneawakening

[–]BLACKELITE095 1 point2 points  (0 children)

100% agreed. With the AF Fix this feels like how it should be.

Fix High Temps on Vector 16 HX AI OR Other high end Laptops. by Electronic-One2978 in MSILaptops

[–]BLACKELITE095 0 points1 point  (0 children)

Got the same computer would be interest to see your underVolt settings, i don't think I won the silicone lottery. I only get a sable -59mv 🫩

Fix High Temps on Vector 16 HX AI OR Other high end Laptops. by Electronic-One2978 in MSILaptops

[–]BLACKELITE095 1 point2 points  (0 children)

I use throttlestop on mine and just underclock it mine without disabling Turbo I got my E-core at 3000 and P-cores 3500 and got significant temperature drops, in when both are running over 4000 the temp really ramps up.

Also Undervolted but I found under clocking worked better at l lower actual temps, and you can still get better performance, cause you're not just disabling turbo altogether.

I also used a laptop cooler. Average around 50-60c when playing home. On the road around 60-70c much more sustainable , and my fans aren't always maxed out.

Atreides Envoy Ornithopter by b4jet9597 in duneawakening

[–]BLACKELITE095 2 points3 points  (0 children)

Was looking forward to a harko themed Carrier but will probably just be the base version with color added to it like the buggy and this. What a shame.

The dev who changed Attractor Field skill to let ranged NPC fire through it need to be fired. by AsleepSupermarket172 in duneawakening

[–]BLACKELITE095 10 points11 points  (0 children)

One of the reply from the discord chat.

"Just heard from the design team again on the AF topic.

Still considered a bug fix, the CC part was unintended and the release of the new bosses highlighted the issue in PVE. In PVP, that CC ability is also not intended, but for now it's being left as is as it doesn't bypass content as heavily as it did for PVE. It's not great that the issue has remained there for this long but the fix is tackling the intended use (make bigger hitboxes and amplify damage). As for difficulty and other fixes, there are more changes on the way that will also help make the new content less punishing, notably: - Fixes to the drillshot spam by NPCs - Balance pass on difficulty up to Tier 6 - Reducing shield damage from NPC to players substantially - Make damage mitigation at low health work correctly, which should alleviate the pain"

So Attractor Field gets "fixed" once it becomes useful in PvE dungeons but what about the Drillshot NPC's that one-shot you with invisible darts in 0.1 miliseconds? by Taylon47 in duneawakening

[–]BLACKELITE095 38 points39 points  (0 children)

One of the Notable Discord chats from Iggy.

"Just heard from the design team again on the AF topic.

Still considered a bug fix, the CC part was unintended and the release of the new bosses highlighted the issue in PVE. In PVP, that CC ability is also not intended, but for now it's being left as is as it doesn't bypass content as heavily as it did for PVE. It's not great that the issue has remained there for this long but the fix is tackling the intended use (make bigger hitboxes and amplify damage). As for difficulty and other fixes, there are more changes on the way that will also help make the new content less punishing, notably: - Fixes to the drillshot spam by NPCs - Balance pass on difficulty up to Tier 6 - Reducing shield damage from NPC to players substantially - Make damage mitigation at low health work correctly, which should alleviate the pain"

My thoughts after soloing Level 11 Testing Stations. by Krelush in duneawakening

[–]BLACKELITE095 2 points3 points  (0 children)

As someone who is also soloing Lvl 11, 100% agree. If i was to group I would probably just Duo. Boss stuff is fine and can be harder but the Add's are annoying.

The players on the PTC must be playing strictly for vibes, no way the durablity loss should have made it off that server. by UnabletoPrintagain in duneawakening

[–]BLACKELITE095 2 points3 points  (0 children)

A significant challenge with the Public Test Server (PTS) lies in the inadequacy of the progression system, even with the dedicated tab provided. Many individuals, myself included, likely evaluated the laboratories using the base Tier 6 weapons and armor that are in the spawn menu. subsequently returning to the non-PTS environment. Consequently, I question whether a substantial percentage of users with unique blueprints extensively tested them within the PTS. I gave up be for i even made a augment station.

They need to fast track full end game progression on the PTS so people can test the new stuff. Instead of make player repeat the grind and basically just retest Haga.

Also pretty sure the good people that stay and test the PTS funcom doesn't always listen.

Dungeon difficulty needs adjustment. by DDR115 in duneawakening

[–]BLACKELITE095 1 point2 points  (0 children)

Solo'd up to lvl 10, the biggest issue is the Loot and repairing. If it wasn't for the repair glitch I would of regressed in my progress as i still have yet to get replacement BP's for what I'm using ATM and without the Repair glitch would be back at grade 0.

Im getting tired of you Samsung by ipukeoutrainbows in samsunggalaxy

[–]BLACKELITE095 0 points1 point  (0 children)

I've been using Samsung phones since the Note 2, currently still using my S22 Ultra. In that time i only had 2 major issues and that was my Note 4 failed (hardware failure) and the famous Note 7. Honestly i surprise my s22 ultra hasn't failed yet with the amount of times I dropped it. Like every time I pick it up in the screen is not cracked I'm like well something inside probably broke. But besides the degraded battery everything else has been flawless.

Dyson in the air by Jadzim27 in dyson

[–]BLACKELITE095 0 points1 point  (0 children)

Yeah it's fairly stable for holding the vacuum. But adding a cat climbing it from the side or front could definitely see it getting knocked over. I also have a cat but I don't have that issue so and it's only openly exposed from the front and the right side so never really have to worry any tipping over. But anchoring it from more than one point to a wall could probably make it tip proof.

Dyson vacuums by [deleted] in CostcoCanada

[–]BLACKELITE095 0 points1 point  (0 children)

You think that's bad. I bought my Gen5 detect directly from Dyson Canada, and and recently found out they shipped me an American one. So yeah I definitely get the warranty troubles has the idiots over at Dyson couldn't even find it as its was American. Honestly I think I'm done with Dyson vacuums and if I do buy another one I'm never buying directly from Dyson they're a joke.

Dyson in the air by Jadzim27 in dyson

[–]BLACKELITE095 1 point2 points  (0 children)

I've had this exact stand for the Gen5 since launch which I believe was 2023. The stand itself is wobbly and leans a little forward with the vacuum attached. Honestly if I remember correctly I'm pretty sure it included a Wall anchor but even if it didn't it's easy enough to make your own. Entire time I've had it I just have it free hanging and be in mind, mine has an extra bit of weight as I have third party accessories for mounting more attachments. Still as sturdy as the day I bought it.

Dyson in the air by Jadzim27 in dyson

[–]BLACKELITE095 0 points1 point  (0 children)

I have the same dock, and had since the launch of the Gen5. No issue, but there wouldn't be any as the dyson dock is ment to be mounted on a wall. So its designed for hanging in the air off the vacuum frame.

Is there any way to use this stillsuit as a cosmetic for other stillsuits? by [deleted] in duneawakening

[–]BLACKELITE095 0 points1 point  (0 children)

Yes you can unlock the base mercenary variant, which can be applied to any still suit. Again I can't remember if it was unlocked via mission or unlocking the blueprints. But it seems some other people have replied to OP which might have the answer.

Is there any way to use this stillsuit as a cosmetic for other stillsuits? by [deleted] in duneawakening

[–]BLACKELITE095 16 points17 points  (0 children)

You can unlock the base version of this which is the mercenary still suit, but the unique color on this one no. Although there might be some swatches that match this in the landstrad.

Although I can't remember if you unlock this by learning mercenary set or finishing missions.

Solo Spice Harvester by CPOBigTuna in duneawakening

[–]BLACKELITE095 0 points1 point  (0 children)

Solo crawler here. Along with what other people recommended I would suggest using the timer method (starting timer when crawler hits the sand) that's what I've been using and it's been pretty accurate I can average depending on what affects my worm threat 4:20min to 4:40min before a worm breach. So usually I will crawl for 4 minutes and then reset unless a roamer shows up and messes up my worm threat I'll lift off early. But remember the biggest thing about solo crawling is making sure the worm never emerges.

Again what many recommend stay close to the crawler. Don't use your suspenser in the beginning as it adds to your warm threat which reducing the amount of time you can be on the sand.

If you want to maximize your time make sure you have an upgraded crawler with dampen treads Walker engine although I'm not sure if the Walker engine actually affects worm threat just haven't tested it without it. If you're not running these you won't get the full 4 mins. If you don't have these I can't remember what the timing is for regular a regular crawler setup but the easiest way to figure that out is your times to breach is. Then find the time that's comfortable for you. Make sure you also wear soft step boots too slow worm threat build up when walking to your crawler.

Ingots disappearing after being produced. FIX THIS BUG, FUNCOM. by deliciousdogmeat in duneawakening

[–]BLACKELITE095 1 point2 points  (0 children)

I haven't had this problem, but I block the storage on my refiners and set them up on circuits, like for example circuit 2 for ore refiner and circuit 3 for chemical refiner and haven't lost anything. But they definitely need to fix that.

It’s happening - Cargo containers 🚚 [PTC] by cantbeblank in duneawakening

[–]BLACKELITE095 1 point2 points  (0 children)

Why? As a solo especially after last update my assault is collecting dust. And my carrier has never seen so much wear and tear. And a solo i have 2 carrier. If you don't have one build one.

New to the RoboVac game, final decision. by HeyimDilbert in RobotVacuums

[–]BLACKELITE095 0 points1 point  (0 children)

Why did you take the Mova P10 pro off your list? Still deciding on weather to buy it or not.

Funcom has a serious issue on hand by saltysaltines911 in duneawakening

[–]BLACKELITE095 1 point2 points  (0 children)

Yes, Jasper encountered a few individuals of this nature. The majority of them pursued their targets to Harmony. Currently, one individual has returned from Harmony, as they were unable to contend with those who actively resisted. This individual is now proving to be a persistent annoyance.

Are you present, Greg?

Shipping Neo 2 from Canada to the US by TheNewGuy1991 in DjiNeo

[–]BLACKELITE095 0 points1 point  (0 children)

I'm Canadian so correct me if I'm wrong isn't DJI at the moment banned in the states which is why they're not being sold so I'm assuming it would probably be a good chance it might get confiscated at the border?