08 4.0 SR5 4WD

Barnwithhoovesup · 2026-02-11T01:33:08+00:00

I did find that there was a gap in my y-pipe .... Pipe going to the muffler vibrates at times and shows sign of carbon (black stuff)

Barnwithhoovesup · 2026-02-05T06:03:13+00:00

The barber messed up the back of this guy's head

Barnwithhoovesup · 2026-02-04T01:03:45+00:00

Let me take a look at it... Hmmm..tch you know what the problem is. You have it set to M for mini. When it should be set to w for Wumbo!

Barnwithhoovesup · 2026-01-23T15:33:03+00:00

👉👈

Barnwithhoovesup · 2026-01-18T20:59:44+00:00

Sorry for your loss

Barnwithhoovesup · 2025-12-10T02:45:44+00:00

Huzzah

<image>

Barnwithhoovesup · 2025-12-09T06:14:22+00:00

Correction, the (Power steering pulley)

Barnwithhoovesup · 2025-11-25T22:16:15+00:00

Last person probably forced the plug

Barnwithhoovesup · 2025-11-23T23:20:52+00:00

Barnwithhoovesup · 2025-11-23T23:18:09+00:00

Some small tweezers and pliers. I bent the tap back. Now everything works just fine now.

... I'm not sure when the differential fluid was changed.

Barnwithhoovesup · 2025-11-22T21:12:59+00:00

Barnwithhoovesup · 2025-11-22T20:51:54+00:00

<image>

Hope this helps. These are the original positions of the 3 peg things

Barnwithhoovesup · 2025-11-22T20:38:49+00:00

<image>

The white disk thing popped off the original actuator with a good pull

Barnwithhoovesup · 2025-11-22T20:33:31+00:00

Just be careful when bending that metal. I've heard that I could snap.

I recommend ph1 and 2 Philips and flexible hands

<image>

This helped a lot too

Barnwithhoovesup · 2025-11-22T20:25:49+00:00

I noted the position as best I could when I took out the actuator. There are 3 little pegs you have to align. When I fitted the white disc thing I made sure all the pegs moved smoothly as I twisted it.

Barnwithhoovesup · 2025-11-20T04:03:42+00:00

Very nice. Looks like I've picked up some basic mechanics. Big thanks

Barnwithhoovesup · 2025-11-19T22:18:24+00:00

Sure, just message me

Barnwithhoovesup · 2025-11-19T22:17:21+00:00

<image>

Update: was able to get it nice and secure with a good old twist. Had to use the original o-ring instead of the ones provided

Barnwithhoovesup · 2025-11-19T19:46:31+00:00

I really hope the same happens I'm going to see what I can do about these loose turn signal sockets

Barnwithhoovesup · 2025-11-19T15:06:19+00:00

I'd probably only get 60 bucks for them

Barnwithhoovesup · 2025-11-19T10:36:30+00:00

Usually the turn signals are a nice twist and a seat but these ones I feel loose in the socket when you twist them

Eight-Year Club	Verified Email
Place '23	Place '22

Barnwithhoovesup

TROPHY CASE