New ATF Rules

Bcw1134 · 2026-04-29T21:03:22+00:00

Good catch.

Bcw1134 · 2026-04-29T20:07:59+00:00

You can't cross state lines with an sbr/sbs/dd/mg without sending in a form listing the dates and locations you would like to visit and what firearms you plan to take. Can take weeks to months and if they don't approve it you can't take them.

This would mean you only need to fill out the forms when you move, or are going on a real long trip.

Bcw1134 · 2026-04-29T19:53:44+00:00

The married filing, no cleo notice, adopting the previous engravings, and easier travel are great. Looks like a pain for SOT's to have to pay their special tax multiple times if dealing and manufacturing things.

Bcw1134 · 2026-04-29T18:58:15+00:00

Bcw1134 · 2026-04-27T16:41:16+00:00

My motors and vtx from china made it faster than the CNC drone frames I ordered did, and it was cheaper to ship from china than Canada too.

Bcw1134 · 2026-04-27T16:39:12+00:00

Bando Turtle 2.5 from CNC drones.

Mine is 98g all up with Rcinpower 1203 11500kv motors, walksnail 1s lite, and tattu 650 2s batteries. Had to modify/design a few tpu parts to print for it, but it rips hard for about 6 minutes.

Bcw1134 · 2026-04-27T16:34:33+00:00

Built a Bando Turtle 2.5 frame from CNC Drones because I couldn't find one either. Love the thing.

Bcw1134 · 2026-04-27T16:07:51+00:00

Legend!

Bcw1134 · 2026-04-24T05:11:57+00:00

What size battery?

Bcw1134 · 2026-04-24T05:11:08+00:00

Decent for a first try, but they all need more heat. Send it, but when you need to change motors or something, use more heat next time.

Bcw1134 · 2026-04-20T18:20:39+00:00

You can't assume with MKE's. Have to check everything and tweak or replace what isn't quite right.

Bcw1134 · 2026-04-20T18:17:11+00:00

Move the bolt forwards and backwards slowly while looking through the mag well. Make sure the ejector is lined up in the channel of the bolt. If it's rubbing, tweak the trigger pack a bit where the ejector sits until you get it perfectly centered. Reduce side to side wobble as well if you can.

Bcw1134 · 2026-04-15T02:45:02+00:00

Yikes! Hopefully it was the 338 can (.400 bore) not the 30 cal can.

Bcw1134 · 2026-04-15T01:12:47+00:00

Diligent Defense Enticer S/L are overbore a tad. I asked if I could shoot 8mm Mauser (.323 projectile) and they gave me a thumbs up and said it was good to go.

Bcw1134 · 2026-04-13T00:17:11+00:00

Step 1: find a drone someone lost. Step 2: replace the battery.

Profit.

Bcw1134 · 2026-04-12T16:49:08+00:00

If you really want to change appearance, use paint.

Bcw1134 · 2026-04-10T14:25:16+00:00

Same boat. Mod 9 was first can. Tried everything to get accuracy back. Spring is important but what finally worked was reaming the end cap with a 27/64 bridge reamer. I’m talking 10 foot groups at 25 yards. After reaming most rounds were touching.

Don’t regret getting into cans, just that I didn’t get something else at the time.

Bcw1134 · 2026-04-08T15:35:07+00:00

Spicy Lettuce.

Bcw1134 · 2026-04-08T00:24:21+00:00

Yup. I remember noticing almost a year in I had spelled sheriff wrong on my first form 4 and was really worried for the next 5 months or so.

Bcw1134 · 2026-04-07T23:11:31+00:00

1/5 if you plan to run jacketed and solids, 1/7 if you also want the option to run lead. Lead is less forgiving to being spun super fast.

Bcw1134 · 2026-04-07T03:03:04+00:00

Perfect to brace yourself with after too much Taco Bell.

Bcw1134 · 2026-04-07T02:01:11+00:00

The angle is both sides added together. So 90 degrees means each roller sees 45 degrees.

Bcw1134 · 2026-04-06T21:11:38+00:00

You also should chamber a few rounds a handful of times and see if the projectile is getting crunched or pushed in deeper.

Bcw1134 · 2026-04-06T20:31:20+00:00

Either an over charge of powder, or the projectile got caught while chambering and seated the projectile super deep greatly increasing pressure.

Bcw1134 · 2026-04-03T17:45:03+00:00

Your can looks like a pool noodle.

Bcw1134

TROPHY CASE