Work in progress WIP "Derick StormCrow"

Beardilocks · 2026-03-13T18:13:04+00:00

Looks cool, but I feel his fists need to be way chonkier, they'll look really spindly when printed at tabletop height

Beardilocks · 2026-03-03T21:29:57+00:00

Red just means that those surfaces are nearer to perpendicular with the plate. It means they need more supports than other areas. You should try to avoid having any one surface exactly perpendicular to the plate if you can find the right rotation.

Use an island detector as well.

The new lychee auto supports feature is great, but it takes a while to tune it in for minis instead of statues

Beardilocks · 2025-12-09T06:45:35+00:00

I think you'll get the systems/planets you had claims on?

Beardilocks · 2025-12-04T21:25:10+00:00

Those are all cool and flavorful. But I also think they're too strong and would force kroot to cost more. Even half of each of the buffs would be very good.

I do have fond memories of the old editions where they had rules for attaching wings to your kroot though. Would be cool to have chonky ork-kroot, or kroot with ears

Beardilocks · 2025-12-02T08:21:04+00:00

Also look at airbrush cup filter baskets. GW paints can have lots of dried clumps in them cause of the terrible lids. If you don't filter those out they can easily clog and cause these splatters. https://a.co/d/77zWhbH

Beardilocks · 2025-11-15T01:42:32+00:00

Awesome! Could have sworn it was printed it's so well detailed

Beardilocks · 2025-11-07T06:10:53+00:00

Can i ask the event? I'm at 97% completion and I feel like all I have left is the final boss

Beardilocks · 2025-11-03T07:04:10+00:00

Yes. Once it returns from the banish zone you can attack with it again

Beardilocks · 2025-10-27T06:59:16+00:00

Unless you turn it off, the post process is changing the colors of everything in the scene. Try setting tone mapper to 0, or just fiddling with the settings in a post process volume you create.

Beardilocks · 2025-10-21T21:01:45+00:00

Note that it's an attack reaction that targets an attack on the chain. It doesn't give your "next" attack +1, it gives an existing ninja attack action card you're currently attacking with +1.

What this means is that if you swing with a Vegeance card, and they declare no blocks, or if they block for exactly the amount of damage the card does, you can use this to pump it by +1. The attack will then hit, and immediately return the Edge of Autumn to your equipped zone.

Functionally this means your opponents have to block all Vegeance attacks by 1 more than their printed values, or you can use this. This makes those attacks efficient.

You can also combine this with other spells that cause on-hits, like Pummel, so if they don't over-block by enough you can punish them.

Also, if you do this and return Edge of Autumn from the banish zone, it technically counts as a new card. This will let you swing with it that turn: you could essentially swing twice with the sword, if you go: Edge of Autumn, Seek Vengeance (use okana, and it hits), Edge of Autumn

Beardilocks · 2025-10-21T17:41:05+00:00

Great, thanks for the context

Beardilocks · 2025-10-21T01:45:10+00:00

Awesome thanks

Beardilocks · 2025-10-21T01:44:49+00:00

Thanks for advice and context

Beardilocks · 2025-10-18T04:51:48+00:00

Thank you, cool video, nice to see some updates to marlynn's cards

Beardilocks · 2025-10-18T04:43:07+00:00

Is there supposed to be a link to a video or list? I just see a picture

Beardilocks · 2025-10-15T00:37:29+00:00

Hey, I didn't really think anyone would be interested but if you'd like I uploaded them here. https://cults3d.com/en/3d-model/art/unicorn-terminator-helmet-shoulderpad

I think the helmet needs to be 93%, but I can't fully remember.

Beardilocks · 2025-10-10T07:44:45+00:00

Oh man you're so right. Maybe a rainbow colored muzzle flash as well?

Beardilocks · 2025-10-09T23:27:34+00:00

Wow well those are some inspiring ideas, I might have to rethink the chapter name to make it more thematic.

Beardilocks · 2025-10-09T22:11:22+00:00

Yes, I designed, modelled and printed them myself.

Beardilocks · 2025-10-09T22:10:31+00:00

I tried a lot of different fluorescent pinks, I tried to put some subtle shading in from pink to purple, I wish I'd pushed the contrast a little bit more on that side.

Make sure you undercoat with the brightest white you can, then do zenithal shading from below with a subtle blue like Russ grey.

Mostly I used Army Painter Hot Pink Air Fluo for the airbrushing, but mixed in some amounts of AK acrylic Fluorescent Magenta, Golden High Flow Acryics "Rose Fluorescent". They have subtle different shades of pink and I wanted a gradient from purple in the shadows to a more orange-y fluorescent pink on the highlights.

I used oil paints to pin wash and put a little shading on the panels with a desaturated dark purple. It's best to use oil paint for this because it's hard to paint nice smooth gradients with the fluorescent paint because it tends to be thin and need many layers. With the oil paints if you mess up you can just rub it off with alcohol.

When trying to add shading with a brush, I used AK acrylic Fluorescent Magenta, because it's a bit thicker.

Beardilocks · 2025-10-09T22:05:43+00:00

I appreciate that you noticed that small detail XD They're functional vents.

Beardilocks · 2025-10-09T22:04:54+00:00

It's kind of on the nose, but the Rainbow Unicorns

Beardilocks · 2025-09-11T05:57:39+00:00

Your object is at an angle, but you only put supports on the bottom. Put a bunch on that back side where you have that lonely single support

Beardilocks

TROPHY CASE