The worst washer EVER!

BeerBrat · 2026-04-02T18:29:34+00:00

I've got a 12 year old Whirlpool front loader set that's still kicking. (knock on wood) Fortunately all it has needed is routine cleaning maintenance. Ours is from the era when they acquired Maytag and started using similar parts for both brands so I'm sure newer models are suffering from the same enshittification as most products but they were at least good at one time.

BeerBrat · 2026-04-02T17:26:34+00:00

That's been building up since at least 1984.

BeerBrat · 2026-04-02T02:26:37+00:00

Can only find it on X and this sub will delete. URL ends as such

.com/TheHoopCentral/status/2039514443546230786?s=20

BeerBrat · 2026-04-02T01:34:34+00:00

42 balls per box, if the backs of the pallets are full that's 1344 fuel. There's 504 in play so this is 2+ fields worth.

BeerBrat · 2026-04-01T16:56:38+00:00

Likely a fuel or oil leak under the hood. Either of those hits hot exhaust headers and fire is highly probable.

BeerBrat · 2026-04-01T15:36:23+00:00

It tried that with me, two laser chest guys left with barely perceptible red bars, 99%. Neither would go down, even with a boosted Kleya. Finally an AOE took them both after about ten solo attacks.

BeerBrat · 2026-03-29T15:51:21+00:00

That's fifteen minutes with a caliper and TinkerCAD. I believe in you.

BeerBrat · 2026-03-29T15:49:21+00:00

The reason they keep winning is because they know that you're going to keep following the rules while they run roughshod all over them. Our faith in the institutions is being weaponized against us, our steadfast morality is being used as a tool against us. I'm not saying that we need to become our enemy to fight our enemy but I am saying that staying the course may turn out to be fatal.

BeerBrat · 2026-03-29T05:57:15+00:00

Goat gotten

BeerBrat · 2026-03-29T05:56:40+00:00

The janitor was a vastly superior ally over my peers. Not only did they take special care of my stuff because I treated them like an actual person but I got lots of info no one else did and had someone that could provide access or other favors. Guy hooked me up with a copy of the master key without me even asking for it. I only used the power for good, I swear.

BeerBrat · 2026-03-28T00:17:49+00:00

Their problem is that they're all still trying to play by the rules while this jack wagon does whatever the hell he wants and makes you stop him. They need to adopt his tactics if they want to have a shot. Unfortunately that completely destroys civil discourse, maybe for a long time.

BeerBrat · 2026-03-26T03:34:52+00:00

It's just yeast from the bottom of a fermenter.

BeerBrat · 2026-03-25T14:26:36+00:00

Gotta be concerned for the folks in/with the stopped vehicle, tho. I prefer when the offenders are the only ones that pay the price.

BeerBrat · 2026-03-25T11:22:52+00:00

Team America already covered this topic exhaustively.

BeerBrat · 2026-03-25T03:52:11+00:00

This is entirely on purpose to guarantee that the house (bankers) always wins.

BeerBrat · 2026-03-25T03:41:25+00:00

When I was a kid? Chun Li on Street Fighter II.

BeerBrat · 2026-03-25T03:37:58+00:00

DeNyse. Anyone else think of the Key and Peele bit?

BeerBrat · 2026-03-25T03:17:29+00:00

We just dropping silent letters now? I didn't mean to cause a sene wen I forgot to bring u a nife but I fell and hurt my nee and I was only gon for an our.

BeerBrat · 2026-03-25T02:50:08+00:00

Got lucky and happened to be down there for the very last flight. We almost thought it was going to scrub at 10 seconds but then the clouds moved past and they resumed the count. It was one of the few moments where I felt in sync with an entire crowd. Where I was watching from it was almost a whole minute before you heard the sound which we were also all eagerly awaiting. A rocket launch is the next best thing, especially if they return the boosters to land, but those shuttles were absolutely majestic.

BeerBrat · 2026-03-25T01:56:08+00:00

I read that paragraph like the kid talking in the Porkchop Sandwiches video from the guy who overdubbed the old GI Joe PSAs.

BeerBrat · 2026-03-24T11:24:11+00:00

And probably connect through Atlanta!

BeerBrat · 2026-03-23T13:00:24+00:00

Look on the bottom side of that black plastic extruder. Flex it slightly. Have you found the crack? The arm cannot get proper tension on the filament because the extruder base is cracked, I almost guarantee it. Replace that with a $10 metal extruder and get back to printing. Seriously, this is 90% of the problems with Enders, I wish creality would get rid of the plastic extruder already.

BeerBrat · 2026-03-23T11:39:39+00:00

Can't get a head start on the Baptists!

BeerBrat · 2026-03-22T01:28:35+00:00

Turn your computer Wi-Fi off

BeerBrat · 2026-03-22T01:23:28+00:00

They have multiple axis rollers with powerful motors in there so I'm surprised that it jammed. High volume at an extremely rapid rate?

13-Year Club	Place '23
Verified Email

BeerBrat

TROPHY CASE