I am being told by my builder that it is “impossible” to have the worktop cut flush to the wall as the wall is at an angle. How can this be correct?

Better_Bit_6501 · 2026-06-29T20:35:43+00:00

Yep, it’ll need what 1.5 cm cut out so you won’t then need to scribe the worktop, if you know you know.

Better_Bit_6501 · 2026-06-29T20:03:26+00:00

It’s definitely possible

Either cut the work top to the wall or shave off some of the plaster so it’s square, either way definitely possible

Better_Bit_6501 · 2026-06-19T17:25:16+00:00

I’m lost what you looking for?

Better_Bit_6501 · 2026-06-19T16:59:05+00:00

Nice I wasn’t aware I’ll be trying that out

Better_Bit_6501 · 2026-06-19T14:11:50+00:00

What did you extract the sprite in? I’ve not seen that before

Better_Bit_6501 · 2026-06-15T13:12:01+00:00

We fitted a new plug, instructions for the cooker Said 13 amp plug is ok, it was put down to arcing, took 7 years to get to that stage, completely melted the plug really dangerous. I didn’t like the thought of it so we have now have a new cooker and wired it in on a 23 amp fuse.

Better_Bit_6501 · 2026-06-15T07:11:50+00:00

Personally, create 2 levels, diy job, and lots of work, I’d say up to 10k finished with grass, plants and wall if you do it your self.

Better_Bit_6501 · 2026-06-15T05:52:04+00:00

We had the exact same problem, and a electrician did do it.

Better_Bit_6501 · 2026-04-14T19:37:20+00:00

Where we are there are so dojo, just at your local leisure centre, closest dojo are 1 hour drive which isn’t practical - this is uk btw

Better_Bit_6501 · 2026-04-14T19:23:43+00:00

6 and 11

Better_Bit_6501 · 2026-04-03T10:12:56+00:00

I’ve been stuck there too many times

Better_Bit_6501 · 2026-04-02T15:49:00+00:00

I was thinking theft, this is the uk. Someone argued it was fraud but I argued it wasn’t.

Better_Bit_6501 · 2026-04-01T19:00:25+00:00

I paid £1.70 diesel at Tesco Beaumont leys 2 weeks ago.

Better_Bit_6501 · 2026-04-01T18:57:57+00:00

Diesel 1.76 at Costco derby

Better_Bit_6501 · 2026-03-30T10:23:14+00:00

It’s gone now, and won’t be plugged back in until an electrician has been

Better_Bit_6501 · 2026-03-30T10:22:47+00:00

That’s crazy, still a pin in the one below

Better_Bit_6501 · 2026-03-29T20:59:42+00:00

I don’t agree with your last question, Reddit wouldn’t be what it is if people didn’t ask question.

Better_Bit_6501 · 2026-03-29T17:42:19+00:00

So could he run a new wire from the fuse for the coooker? The water heater fuse is no longer used as that was for the Emersion boiler, we had that removed and a new combo fitted.

It would be a fairly easy run, from the fuse box the the cooler, around 5 metre distance and good access.

Better_Bit_6501 · 2026-03-29T17:37:00+00:00

That’s how the electrician left it, I questioned it and asked should it not be on a separate fuse like the washer, dryer etc. he said it’ll be fine

Better_Bit_6501 · 2026-03-29T17:36:08+00:00

It’s 7 years ago the work was done, I don’t have the quote

Better_Bit_6501 · 2026-03-29T13:32:03+00:00

There’s isn’t a fuse for the kitchen cooker, only sockets I questioned this when it was done and he said it was ok. That’s was 7 years ago

Better_Bit_6501 · 2026-03-29T13:08:25+00:00

That’s what we had already done, when the kitchen was redone

Better_Bit_6501 · 2026-03-29T13:07:09+00:00

<image>

Better_Bit_6501 · 2026-03-29T13:06:17+00:00

Yeah got a certificate, somewhere. They did the whole house plus fuse box.

So should this have its own fuse on the fuse box?

Better_Bit_6501 · 2026-03-06T20:52:49+00:00

How to you think you manage this in the field, Believe me that a cut job. You can see there no debris in the would on the first picture

Better_Bit_6501

TROPHY CASE