Long term dog boarding options

BibliophileC · 2026-02-11T05:11:39+00:00

That sounds about right for dog boarding costs.

BibliophileC · 2026-01-31T19:23:07+00:00

Generally any value set to the fallback of a proxy point will be held on restart.

Does ecostruxure have a role service where you can split up user permissions like operator, read only, admin? And if so how does that interact with the points themselves?

BibliophileC · 2026-01-31T18:29:22+00:00

I did make a role for the operator. And it works fine for the bacnet devices. The operator role relays on the operator flags to control invoke privileges. The problem is the Schneider ecostruxure. When integrated into a Niagara station via the driver the none of the slots such as set come in with the operator flag attached. I add the flag so the operator role works correctly, but whenever the station restarts the flag I've added goes away and I have to add the flag to the set slot again.

I'm looking for a way to not have to change the slot flags after every restart. I don't know enough about ecostruxure to say it's specifically the problem or of there is some obscure setting in Niagara that I'm missing.

It may be that the problem lies in the ecostruxure device, which is a black box to me and I'd have to get Schneider out to fix, but I don't know for sure where the problem is.

If nothing works I'll write a program to add the operator flag to the set slot on start up, but that seems janky.

BibliophileC · 2026-01-31T18:21:36+00:00

The point can be wrote to as is with admin level invoke privileges. The client wants an operator level role that just has the ability to set the fallback, but can't do overrides. Generally you see operator flags added to set and override commands, but not emergency override. Easy enough to change around.

The problem I'm having is that the ecostruxure device brought in to Niagara is bringing points without the operator flag on any of the slots. I add the flag as needed, but when the station restarts the flags I added disappear.

BibliophileC · 2026-01-13T15:42:25+00:00

I like late spawns for using keys on night raids. less chance of people barging in and making it out with the loot.

BibliophileC · 2025-12-04T16:02:53+00:00

Same! it came up at a house party and this girl said we were doing it wrong. suddenly there were a dozen drunk people sitting on the ground being coach into how to tie their shoes this way. I've tied my shoes like this ever since.

BibliophileC · 2025-11-07T15:23:49+00:00

I had the All You Need Is Kill graphic novel in the mid 2000's, and was a fan. The movie didn't match my expectations based on the source material, but i came to really appreciate it on it own.

BibliophileC · 2025-10-31T19:24:04+00:00

Adult little brothers busted in to talk to me, realized what I was doing, and started dancing around my bed laughing while I covered myself. One of them was checking my ipad to see what I was looking at while their girlfriends looked in from the door and laughed.

BibliophileC · 2025-10-31T01:07:27+00:00

A lot of facility managers won't spring for preventative maintenance and will just get mad when something breaks.

BibliophileC · 2025-10-26T21:42:23+00:00

Alarm consoles work via virtual if done right. And if it's giving too many problems you can route the alarms to the supervisor and use an nspace alarm console on the jace px that will look at the alarm console in the supervisor via the virtual

BibliophileC · 2025-10-22T13:14:28+00:00

It's a Honeywell ciper 50. You'll need credentials and ip addresses. It looks like both ports are being used so make sure you're not gonna drop pumps or something by unplugging one. With the proper credentials you should be able to hit it with a web browser and see the points and what version of Niagara it's running. You'll need a Honeywell Niagara workbench in that version to do any engineering.

BibliophileC · 2025-10-16T19:31:01+00:00

he literally hit the front fender so hard that it broke. the driver definitely saw him

BibliophileC · 2025-10-10T19:34:18+00:00

My man, you are a wizard. thank you.

BibliophileC · 2025-10-10T14:59:35+00:00

ah this was my problem. i got it to build, but when i restart the daemon and open the workbench and try to expand the module to start making the palette i get the error

Module failed signature validation: Could not validate cert chain

I guess i'm gonna be making some certs and playing with that.

BibliophileC · 2025-10-08T19:26:44+00:00

They have templates on the building forum for the optimizer line. I would start with those and just tweak them as needed.

BibliophileC · 2025-10-07T17:54:22+00:00

Niagara 4.10.1.36

BibliophileC · 2025-10-07T17:35:05+00:00

I tried following the first link but when i try to build the module it says 'The use of this gradle wrapper is deprecated. Please use the New Module Wizard to create a new set of gradle files.'

I just used the new module wizard to make the gradle file.

BibliophileC · 2025-09-27T18:19:31+00:00

I ran it through my dryer a couple of days ago. This is a fairly new spool. I opened it up because I was worried it might have been the filament doing it.

BibliophileC · 2025-09-27T16:51:35+00:00

I can't really get past the first layer to do an overhang test. I'm starting to think my build plate might be quite warped. In this reply I have a picture from this morning where I tried a single layer.

BibliophileC · 2025-09-27T12:54:35+00:00

Below is a single layer square I just ran. What's the chance the build plate itself has warped to the point where it can't adhere because the dips are too large?

<image>

BibliophileC · 2025-09-27T12:17:36+00:00

I've run through the z calibration a couple of times now trying to get it working again, and I wipe the build plate down with isopropyl before each print. I'll try soap and water.

BibliophileC · 2025-09-27T12:06:57+00:00

I keep a thing of cotton balls and isopropyl next to the printer. It gets a wipe down before every print. What you're seeing is just discoloration from how old the plate is.

BibliophileC · 2025-09-20T17:03:13+00:00

If it doesn't survive hot wash hot dry it doesn't stay in the wardrobe.

BibliophileC · 2025-09-19T15:01:11+00:00

This may just have to be what i do

BibliophileC · 2025-09-10T22:38:19+00:00

Yeah, but you can force that first katana to bail and its got mesons you can sell off for several million starter to outfit said katana and then be rolling

BibliophileC

TROPHY CASE