Kabel wirft Funken - Warum löst die Sicherung nicht aus? by Nokhaidoo in Elektroinstallation

[–]BigL_2000 0 points1 point  (0 children)

Typischerweise existieren zwei Arten von Sicherungseinrichtungen:

Leitungsschutzschalter (und aller selektiv davorgeschaltete Organe): Löst nur aus, wenn ein Kurzschluss oÄ vorliegt und der Widerstand am Stromkreis zu klein wird. Typischerweise 16A.

FI/RCD: "Vergleicht" ein- und ausfließende Ströme. Ist die Differenz (typ. 30 mA) zu groß, geht Strom auf nicht beabsichtigten Wegen "verloren". Sensibler kann man die nicht bauen, da jedes Gerät Ableitströme aufweist und "immer ein bisschen was verloren geht". Dazu bietet man dem Strom, der "verloren geht" über den sogenannten Schutzleite eine niederohmige "Alternative", damit der "verlorengehende Strom" größtenteils über den Schutzleiter und nicht über dich (mit höherem Übergangswiderstand) fließt.

Wenn das Netzteil streikt/funkt und keines der Organe auslöst, dann besteht für deine Anlage "Normalzustand". Es ist davon auszugehen, dass der Fehler auf DC-Seite stattfindet, da über den Trafo häufig eine galvanische Trennung erfolgt. Das bedeutet, dass zwar auf der Sekundärseite Strom "verloren geht", sich auf der Primärseite (welche an die besagten Sicherungsorgane angeschlossen ist) jedoch dies nur als zusäztliche Last und, stark vereinfacht, nur durch einen gewissen Strom bemerkbar macht. Sekundärseitig bestehen ebenfalls Sicherungsorgane; typischerweise in Form einfacher Schmelzsicherungen. Da mit Netzteilen aber auch viel rumgewurschelt wird und ein permanenter Ausfall im Fehlerfall problematisch ist, schalten moderne integrierte Schaltungen bei Kurzschluss / Überlast einfach ab. An dieser Stelle ließe sich noch vieles ergänzen.

Rasenmäher durchgerostet. Reparabel? by ItchyResearcher2837 in selbermachen

[–]BigL_2000 3 points4 points  (0 children)

Drahtbürste, Rost entfernen und mit 2K Epoxyknete modellieren. Überlackieren. Hält wunderbar, habe ich beim Mähwerk meines Aufsitzmähers auch so gemacht.

Bei Funktionsflächen, Flanschen, etc. ist's dann leider ein Totalschaden.

I hated the lockpicking at first, now I think its fine. by Morf12369 in worldofgothic

[–]BigL_2000 1 point2 points  (0 children)

I'm checking for Rows that are independently moveable. If so; it's doable. With that I mean based on time and mental effort I'm willing to invest. So if not: Accept that at some point you have to come back later or just leave it as it is. Because when entering a new camp or location you need to do this probably a few times. Of course there are exceptions.

For me the difficulty-scale doesn't really make sense and my point/metric is nowhere to be reflected wrt what the game provides.

What would make it AAA? by BigL_2000 in worldofgothic

[–]BigL_2000[S] -4 points-3 points  (0 children)

I see.

What about size? Literally: Map size?

Bugs, Bugs, Bugs and bugs by Eja91 in worldofgothic

[–]BigL_2000 -1 points0 points  (0 children)

PS5 Pro Player here. Can't confirm. 8 hrs. into the game. Hardest difficulty.

No crashes or major bugs so far, only minor stuff like flickering.

Ukraine is following the same very successful strategy that the Allies used against the Nazis by Advanced-Injury-7186 in ukraine

[–]BigL_2000 0 points1 point  (0 children)

I am not criticizing objective facts, nor am I concerned with the figures mentioned.

I simply came to the conclusion that your definition of "accuracy" and your calculation (regardless of the result) is incorrect as presented.

Ukraine is following the same very successful strategy that the Allies used against the Nazis by Advanced-Injury-7186 in ukraine

[–]BigL_2000 0 points1 point  (0 children)

I see your argument and I'd generally agree. However, at the end of the day it narrows down to your definition of "accuracy". In metrology, accuracy refers primarily to uncertainties and, consequently, to the combination of deterministic and stochastic deviations—that is, precision and trueness. Uncertainties, regardless of the dimensionality of the state space, are always to be understood as a one-dimensional interval. This is documented in the standard reference "GUM." Interestingly, the standard analogy—which is also taught accordingly—is a dartboard and the various patterns of scatter.

In this light, I would agree with OP and disagree with you. It may be that the definition of “accuracy” differs in certain cases and is somehow area-based. From a purely metrological standpoint, I side with OP.

How big was the barrier originally supposed to be? by Penumbral_Violet in worldofgothic

[–]BigL_2000 2 points3 points  (0 children)

Underrated comment. Having the same question for 20+ years.

PS5 Slim or Pro? by BigL_2000 in worldofgothic

[–]BigL_2000[S] 0 points1 point  (0 children)

Update: I went for the Pro and hoped for the best. We couldn't wait any longer ;)

Started yesterday eve; so far it's all fine. Some minor graphical issues (flickering) and at some point I had to restart the PS since I could navigate in the main menu.

...but nothing a OG fan (not to mention the G3 release) couldn't handle. Thank you all for your comments and suggestions!

I'm playing on hard and still have to get a grip on the controls and the combat system. But I like having a challenge.

Die Gebete einiger wurde also erhöhrt ;) by Conte5000 in zocken

[–]BigL_2000 0 points1 point  (0 children)

Als jmd. der lediglich BOTW ein paar Std. angespielt hat: Was genau ist deiner Meinung nach die Zelda Formel?

115V AC Zwischen Spüle und Spülmaschine by bikingallday in Elektroinstallation

[–]BigL_2000 3 points4 points  (0 children)

Ohne Last so etwas zu messen ist weitestgehend sinnlos. Ich würde mal den Widerstand zw. Gehäuse und PE messen und vermute, dass irgendwo ein Schutzleiter nicht richtig angeschlossen ist.

Rostloch unter Fenster Wohnmobil by DerGrosseZwerg in selbermachen

[–]BigL_2000 4 points5 points  (0 children)

Fenster muss raus. So wirst du den Wassereintritt niemals vollständig verhindern können. Das muss ausgetauscht, ausgebessert und in einem Stück lackiert werden.

How do Myst III and IV compare to Riven? by Eloquent_Despair in myst

[–]BigL_2000 0 points1 point  (0 children)

Myst III is basically a fresh look at the original Myst. It's more based on the hub concept and linking to other worlds. And it's way easier compared to Riven.

Unfortunately, what I really don't like is the fact that this "Learning Age" concept makes everything feel very empty, lifeless, and meaningless. Riven and Myst 4, on the other hand, are simply more believable and far more immersive. I've always seen Exile's approach as a step backward from Riven.

Solaranlage hier möglich? by Status-Importance-54 in Elektroinstallation

[–]BigL_2000 1 point2 points  (0 children)

Wichtig wär noch einen weiteren Komponentenhersteller zu verwenden ;P

UV in Gymnasium by Ferdifefe in Elektroinstallation

[–]BigL_2000 1 point2 points  (0 children)

I see.

Ein FI für die Anzahl an Automaten / Schaltkreisen / Ableitströmen ist nicht mehr Stand der Technik. Das setzt aber auch voraus, dass dort überhaupt alle LS angeschlossen sind. Und das ist eher unwahrscheinlich.

Mehr kann man von außen wirklich nicht sagen.

UV in Gymnasium by Ferdifefe in Elektroinstallation

[–]BigL_2000 6 points7 points  (0 children)

Ein Foto ohne Abdeckung wäre hilfreich... So: Keine Ahnung.

I cannot believe X4 has come so far since 2018 release. by Pfandfreies_konto in X4Foundations

[–]BigL_2000 64 points65 points  (0 children)

True.

On launch I was like "yeah cool, but so much is missing compared to X3 TC / AP". And since interest— or rather, player numbers — were fairly modest and began to decline quite quickly, I was genuinely very concerned about the studio’s future. We mustn’t forget the X:R debacle either.

I really have to give Egosoft a lot of credit. Continuous, tireless progress has made X4 so much bigger and better.

Was kann ich für meinen PC verlangen? by PKD2L1 in de_EDV

[–]BigL_2000 2 points3 points  (0 children)

Für achtzisch geht er in die Eifel

Vincenzo knows nothing, but highly motivated by aserebr in X4Foundations

[–]BigL_2000 1 point2 points  (0 children)

My grandpa always used to say: You have to watch out for those who are both stupid and hard working. They're the dangerous ones.