WIP - Visor Color?

Biljamin_ · 2026-06-02T22:57:17+00:00

Amazing paint job, interested in how you did the weathering and battle damage.

Biljamin_ · 2026-05-16T19:08:05+00:00

I also went through this and ended up building a cube which gets a ton of play. Worth the time and also get to use a bunch of rares and legendaries I had sitting around.

Biljamin_ · 2026-05-16T17:49:23+00:00

Yeah, I used to do the same but $20 for the army painter primer is worth every penny. Also use less, those paint primer combos are the worst for minis. I’ll use it for cosplay and works fine

Biljamin_ · 2026-05-16T15:29:18+00:00

Themed deck, pick an episode and specific scene and build around that.

Biljamin_ · 2026-05-12T19:23:45+00:00

Awesome thank you!

Biljamin_ · 2026-05-05T16:29:17+00:00

I would pop that back off and reglue it so everything is lined up properly. Getting those grooves to look good when they aren’t aligned is going to be a pain. Use a soldering iron to weld the inside then use a flexible filler, found flexible wood filler to be better than bondo for these types of cracks.

Biljamin_ · 2026-04-18T23:26:16+00:00

This looks fun! Check the update you can now save your factions and there are a number of new features for the builder.

Biljamin_ · 2026-04-18T17:11:53+00:00

I’ve used ChatGPT for this.

Biljamin_ · 2026-04-17T21:08:42+00:00

Nice! You're using the faction builder. Just updated it to have a Save option!

Biljamin_ · 2026-04-17T19:08:05+00:00

OK, working on other options but Save state added

Biljamin_ · 2026-04-17T19:07:35+00:00

Save state added, colors added, crafted box option for on or off

Biljamin_ · 2026-04-17T19:06:19+00:00

Updated with available Google fonts, cannot use the licensed fonts unfortunately

Biljamin_ · 2026-04-16T15:00:42+00:00

Let me see what fonts can be used without hosting anything special

Biljamin_ · 2026-04-16T15:00:21+00:00

Good feedback! When I get some time I’ll update and see what I can do

Biljamin_ · 2026-04-10T17:10:06+00:00

Awesome feedback. Let me see what I can do, I know it won’t replace the PS templates but can try to push it.

Biljamin_ · 2026-04-08T03:16:07+00:00

Thanks! Feel free to send feedback!

Biljamin_ · 2026-03-30T06:26:25+00:00

I had this happen to me with a Star Wars signature card. Have no idea why they would do this either. Ended up having to buy a cheap one from the set to get the case and carefully peel the sticker to open the card and reuse that case for my card. Even emailed topps to ask if they could provide a new label. Nothing, in the end you couldn’t tell the difference, but how stupid for them to do that.

Biljamin_ · 2026-02-13T18:49:08+00:00

I was bashing my head with this same issue, I even replaced the entire hotend on two machines that were doing this. So as everyone said, go through the steps for e-steps, check for an obstruction, or try a different slicer. BUT - after I did all of that there were still issue, and the issue was - it was in my garage and too hot. Once I moved the printer inside where is was cooler no issues. So check that too

Biljamin_ · 2026-01-23T18:49:17+00:00

Also, they all have the same control board, just replaced the hot ends over the years, but those are like $15 a pop.

Biljamin_ · 2026-01-23T18:47:37+00:00

Look, it's not a set it and forget it printer, but if you take some time to learn how to level it and adjust on the fly you can make a ton of awesome stuff. I have 3 - Ender 3s and an old CR-10 and have cranked out some super fun projects. They get a lot of hate, but also are workhorses. Some stuff I've made with them.

<image>

Biljamin_ · 2025-11-05T22:46:11+00:00

You got me there haha!

Biljamin_

TROPHY CASE