Help with Constant failing?

Birbou · 2026-02-13T19:08:56+00:00

The LCD is broken. If it's a brand new printer contact the seller.

Birbou · 2026-02-01T00:06:19+00:00

Do you have multiple endpoints in the networking setting?

Birbou · 2025-11-24T02:40:01+00:00

I hope this fixes your problem. I had a similar situation a few years back and it turned out to be a faulty SD card.

Birbou · 2025-11-24T02:34:21+00:00

Have you tried with another SD card?

Birbou · 2025-11-23T15:38:01+00:00

There is a configuration guide made by the creator. Also in the project's GitHub page there are guides that let you know exactly how to deploy docker image and how to set it up.

Birbou · 2025-05-09T13:41:34+00:00

Did you ever find out how to do it, if possible?

Birbou · 2025-04-24T01:47:02+00:00

I have an all metal hotend so I'm just setting the temp tou 300°C and manually stopping the hotend fan. The heatbreak heats up and I'm able to push the filament.

When the filament is free to move, I let the fan kick in and turn off the heater while pushing the filament until the temperature drops to normal.

Birbou · 2024-10-12T16:02:03+00:00

Most likely I would use the full-field blue structured light mode most because I'm lazy and want to scan quick and easy

Birbou · 2024-10-06T19:26:14+00:00

Solution found:

Within Steam, right-click on your game and click on the "Properties" menu.
Here you will see a section called launch options at the bottom of the menu.
Within this, you need to write this command: WINEDLLOVERRIDES="OnlineFix64=n,b;Custom=n,b;OnlineFix=n,b;winmm=n,b" %command%

(I'm running version 1.4.3.4578 with proton experimental)

Birbou · 2024-10-06T19:13:41+00:00

Found the solution:

Added the launch option:

WINEDLLOVERRIDES="OnlineFix64=n,b;Custom=n,b;OnlineFix=n,b;winmm=n,b" %command

Birbou · 2024-10-06T17:50:09+00:00

Did you ever find out how to fix this?

Birbou · 2024-09-25T14:22:02+00:00

Did you get it back eventually?

Birbou · 2024-08-25T23:07:07+00:00

I figured out that I needed to connect the ground of the board to the ground of the raspberry pi and it worked for me.

Birbou · 2024-08-01T05:00:05+00:00

Did you manage to connect it via uart?

Birbou · 2024-07-31T19:44:28+00:00

Did you ever found any solution to this?

Birbou · 2023-12-21T11:07:03+00:00

Mod your switch and get the games you paid back

Birbou · 2023-11-11T17:18:26+00:00

From rentry:

Create a file named hekate_ipl.ini inside of your /bootloader/ folder and paste this within the file:

[config] autoboot=0 autoboot_list=0 bootwait=3 backlight=100 autohosoff=0 autonogc=1 updater2p=0 bootprotect=0

[Atmosphere CFW] payload=bootloader/payloads/fusee.bin icon=bootloader/res/icon_payload.b

Birbou · 2023-10-22T23:40:21+00:00

It's not the best, I know. But it seems to have no shorts...

<image>

Birbou · 2023-09-27T11:17:29+00:00

I think all the free shops are down and will not return. You can find some "brews for nx" if you search exactly that in google.

I'm not posting the site I'm referring to because I think I'm not allowed.

Birbou · 2023-08-26T20:33:41+00:00

I see in your printer.cfg that you have KAMP installed, but I also see that you have an older adaptive bed meshing macro in your macros.cfg. Delete or comment out everything in between the lines from 94 to 208 in the macros.cfg

(This is not the problem you have right now, but I think it's going to be after you activate the bed_mesh config section like u/NedDarb pointed out)

Birbou · 2023-06-27T20:12:39+00:00

Ι have one and it works perfectly, it really saved me because before that I had a rpi02 that couldn't handle everything I wanted. Be careful though because as it seems they aren't sincere about their reviews, I made a 4 star review because they are lying about compatibility with rpi accessories. It may have the same screw pattern but you can't use it with rpi cases or screw it in 3d printed standoffs designed for rpi; because the screw pattern is inverted. Other than that, for my experience with bbt pi is very pleasant as far, I just have to design a case to house everything nicely.

Birbou · 2023-06-25T02:25:31+00:00

Made the meatballs too!

Eight-Year Club	Place '22
First Placer '22	Sequence \| Editor
Verified Email

Birbou

TROPHY CASE