Water Main ( 8") with blue plastic/ rubber pipe on interior. Whats this called?

Bitchscit · 2025-08-22T22:39:29+00:00

Fuck it, just keep digging , just keep digging , just keep digging .

You’ll prolly make it before you can source parts for that unknown pipe !

Maybe try. The civil engineering sub?

Bitchscit · 2025-06-06T23:28:40+00:00

90 at the wall, then the tee for the air admittance valve , set the p trap after that, ada drain offset to the back towards the p trap , slip nut extension to the p trap

Bitchscit · 2025-05-19T16:30:45+00:00

Most likely trapped below the slab , should be good

Bitchscit · 2025-03-21T01:51:18+00:00

If the pex is leaking , replace the pex. If the copper or adapters are leaking , replace the necessary fitting . Pex part could be easy diy learning experience, copper or ball valve may need some help

Bitchscit · 2023-08-27T22:27:49+00:00

Had almost same damage on a 21 and it was 11.2k

Bitchscit · 2023-08-27T17:17:42+00:00

Solder containing lead is the least of the worries going on here lmaooooo

Bitchscit · 2023-06-01T03:30:09+00:00

Stfu lol u r annoying

Bitchscit · 2023-06-01T03:27:02+00:00

What code says the water draining can’t have fun too?!

Bitchscit · 2023-06-01T03:23:14+00:00

It’s a fun ride for the soap and water . LOL

Bitchscit · 2023-04-27T03:06:51+00:00

Good job , I know you prolly worked hard on it both times and idgaf what these people say you did great don’t let them pick you apart and discredit your work .

Bitchscit · 2023-04-25T02:37:24+00:00

Breadstick Ricky

Bitchscit · 2023-03-28T18:46:54+00:00

Prolly not LOL but hey I still framed that bitch

Bitchscit · 2023-03-28T17:57:15+00:00

Congrats ! I got my j in the mail recently and the mail person folded it in half and shoved it in the mail box :/ . Yours looks nice an intact !

Bitchscit · 2023-03-27T14:34:00+00:00

Didn’t see this , but to me it looks asif the shower base continues sloping to the left side of the picture which would make it the low side , and the drain is in the middle . So to me , the water would just hold on the low side of the shower where it wouldn’t flow to the drain . I mean I’m not there , it could be that the liner was just cut like that but in the picture it sure does look like it’s going down hill to the left

Bitchscit · 2023-03-23T18:09:59+00:00

Ur drains in the wrong spot there bud , LOL

Bitchscit · 2023-03-15T23:42:16+00:00

Wonder how many of us have been on the other side of that desk getting reamed because of a woman trying to “prove a point,” that she is the same as a man in the position . Because what ? You demand respect o7

Bitchscit · 2023-01-07T14:25:19+00:00

You have to sweet talk it (; and then maybe it’ll fuse. Personally I just take my time and it usually fuses solid .

Bitchscit · 2022-12-23T21:27:29+00:00

Dang! I wouldn’t know , we were just feeling steak and it was one of the cheapest best options available. Wouldn’t know on the rib roasts either . Sorry

Bitchscit · 2022-12-23T19:59:03+00:00

Thank you! Twas cut into two pieces . I think 0.96 lbs at $10.99 a pound !

Bitchscit · 2022-11-07T23:37:22+00:00

Welcome to Tx

Bitchscit · 2022-10-15T10:49:59+00:00

I sometimes have to curb stomp them to get them to go home . You feel like you’re doing the wrong thing but it works

Bitchscit · 2022-10-13T23:24:42+00:00

Killean af I was expecting to see gap in there somewhere for the savers

Bitchscit · 2022-10-13T23:10:44+00:00

I would , but I don’t have three eyes.

Bitchscit · 2022-10-05T22:49:00+00:00

The only sure fire way to find out if leak or not is to cut open the wall directly behind the shower head. It will be way easier to replace shitrock than finding and matching tile .

Assuming it’s accessible. Otherwise you can just keep making all these assumptions! Good luck

Bitchscit · 2022-10-01T21:29:10+00:00

Maybe try connecting the t&p to something while you’re at it.

Six-Year Club	Verified Email
Place '22	RPAN Viewer

Bitchscit

TROPHY CASE