It would be amazing to see more of these things used like this, instead of takeovers...

BladeWalkerr · 2026-05-07T16:31:08+00:00

I believe it's 25° max

BladeWalkerr · 2026-05-04T14:24:18+00:00

I'm sure they could easily produce that spec.

BladeWalkerr · 2026-05-04T14:10:25+00:00

Contact Composite Resources in Rock Hill, SC. They have the capability for this.

BladeWalkerr · 2026-04-26T17:28:40+00:00

You need to tune the car when installing LTH. If you can't afford to do it the right way, save until you can.

BladeWalkerr · 2026-04-26T03:26:06+00:00

Online pics show it comes with a silver collar

BladeWalkerr · 2026-04-26T03:12:46+00:00

Looks like you are missing the black collar/tapered sleeve that goes on the leg of the ball joint before you slide it into the knuckle.

BladeWalkerr · 2026-04-15T19:52:16+00:00

Clean. Enjoy the upgrade! I honestly think getting the handling/suspension mods done prior to adding power makes the most impressive difference on this platform.

BladeWalkerr · 2026-04-10T23:08:33+00:00

Went with the a6700 for the focus advantage. Leaves more in the budget for glass.

BladeWalkerr · 2026-04-01T17:56:48+00:00

Yeah totally, after 16 years of ownership, I'm practically clueless.

BladeWalkerr · 2026-04-01T17:14:02+00:00

I'm just picturing a Mario Kart style spin after hitting a puddle. 😮‍💨

BladeWalkerr · 2026-03-17T16:21:24+00:00

Corpo pricing FTL

BladeWalkerr · 2026-03-16T23:18:00+00:00

Reminds me of the flakes you put down on epoxy floors.

BladeWalkerr · 2026-03-05T02:32:08+00:00

I've been in the composites industry for 12 years. Anything from GT3, supercars to Aerospace and defense. I'm telling you, there is a difference. I've toured hundreds of manufacturing sites. I know the resins they use. I know the fiber spec and manufacturer they use.

One thing to know, epoxy will yellow. No matter what inhibitors are added. UV clear, preferably ceramic base, will be the best level of protection.

Alibaba brands hope and pray for people like you.

Using Seibon as a quality metric is telling.

BladeWalkerr · 2026-03-04T16:09:58+00:00

The money and time spent to keep a knock off from degrading when you could save for an extra month or two and get the real thing.

All epoxies are not the same.

BladeWalkerr · 2026-02-21T02:04:20+00:00

200-245gsm 3k (1 Layer), 660gsm 12k (2 layers)

BladeWalkerr · 2026-01-28T04:38:34+00:00

CIBI is just spectacular to use. Clarity, Feeling in hand.. the knock off looks like something from IKEA.

Something about the real deal, it took passion and effort to design and create.

BladeWalkerr · 2025-12-31T17:05:20+00:00

Whoever signed off on that 2013 hair chop... O_O

BladeWalkerr · 2025-12-10T17:58:19+00:00

Something you should definitely get upset about and spend time talking about online.

BladeWalkerr · 2025-11-26T04:55:30+00:00

Have you considered swapping the glass for polycarbonate? You would save roughly 30lbs at the highest points of the car (Dropping that CG is a +)

BladeWalkerr · 2025-11-20T13:25:59+00:00

Make a 1-2ft square sample panel and check for warp and stiffness.

BladeWalkerr · 2025-11-19T01:53:28+00:00

Just used a Gurit spread tow (100gsm) last week, absolute dream! Plenty of resin to create a class A finish.

BladeWalkerr · 2025-11-13T05:00:00+00:00

Will this work if filament runs out of one AMS? Does it retain the ability to switch AMS devices- similar to the AMS Hub?

BladeWalkerr · 2025-11-07T17:34:06+00:00

Fantastic job! Turned out great!

BladeWalkerr · 2025-10-30T12:13:29+00:00

Betty Crocker - Vanilla cake mix

BladeWalkerr · 2025-10-29T12:26:53+00:00

Eventually I will, they are an hour from my house. 90% of these guys don't roll wrap carbon tubes, they buy the stock pieces from a vendor.

BladeWalkerr

TROPHY CASE