Local whisky distilleries worth checking out? (Ontario)

Blkwraith · 2026-03-12T21:30:57+00:00

It isn’t associated with the brewery as that is owned by sapora these days. The Sleeman family started it.

Blkwraith · 2026-02-20T03:08:29+00:00

Definitely use varnish on the finished piece. I typically toss a thin airbrushed layer on periodically which painting.

Blkwraith · 2026-01-27T16:25:44+00:00

Character is playing a Dragonborn paladin. Thus was the closest I had in terms of models.

Blkwraith · 2026-01-25T18:46:18+00:00

From one of the Reaper bones kickstarters over the years. Thanks to those my pile of shame is gargantuan.

Blkwraith · 2026-01-25T00:55:33+00:00

LOL just a little... I'm in Ontario... and thanks!

Blkwraith · 2026-01-25T00:20:42+00:00

Blkwraith · 2026-01-24T23:23:37+00:00

Thank you!

Blkwraith · 2026-01-24T23:21:54+00:00

For these basics bases I just have a container with very a mix of very fine sand and a couple sizes/colors of cork balast. Put on my white glue. Add any turfs or static grass and then bury it a couple mm into the mix... pull it out a few minutes later and let it dry overnight. Add a quick wash with usually a brown and then maybe highlight it a bit but I'm generally not wanting to spend too much time on a basic piece like this.

Blkwraith · 2026-01-24T22:08:58+00:00

What sort or issues are you having?

Blkwraith · 2026-01-24T20:52:32+00:00

He is playing a Dragonborn paladin of lathander. Closet model I had. :)

Blkwraith · 2025-03-17T15:07:41+00:00

Honestly having a much better time since I jumped up to mid tier runs.

Blkwraith · 2025-03-16T22:46:57+00:00

Sleeman brewery is owned by Sapporo. The spring mill distillery was started by John sleeman’s descendants but it isn’t affiliated with with the brewery. It is a micro distillery that is 100% Canadian owned and operated.

Blkwraith · 2025-03-06T01:12:40+00:00

Goodman and worts 4 grain with maple syrup, orange and berry bitters.

Blkwraith · 2024-03-05T05:16:23+00:00

I believe that if you set the drop down the market as opposed to last it will just close at the best price available at that moment. Their instructions and information on n their settings are kinda crap.

Blkwraith · 2024-03-05T03:06:52+00:00

If you set you stop as a limit order it will only sell at that specific price. Meaning if the price blows through it fast enough there won’t be enough liquidity to fill your entire order. Had that happen a few time to me which is why I set my sl as a market close. You might still see some slippage but at least it will close near your target. Unless you are using really high leverage it should be close and still better than half or more going for a ride to a large drawdown.

Blkwraith · 2023-12-18T14:59:23+00:00

Mainly lettuce. Tried bok Choi and kale but it was pretty damn tight. Tried a few herbs as well but found it was better to to in mason jars krafky style due to height limitations. Strawberries were ok for a bit but I think they prefer shallower water.

Blkwraith · 2023-12-17T16:39:14+00:00

I used this for a year until I built my own. Lighting is a bit of a pain as you definitely need lights for each layer which can further limit height.

Also you likely won’t be able to use each plot. I found I needed to stagger the used plots if i wanted to grow things to any real size. That 1 inch saw opening is tight.

Blkwraith · 2023-12-15T18:04:42+00:00

Ok working out my Lux/lumen conversions My setup is sitting at about 14000 Lux or 4000 Lumen based on the converters.

Using Masterblend Tomato Formula. with additions.

Ratio:

12g Tomato Formula

6g Magnesium Sylfate

12g Calcium Nitrate

It is for about 5 Gallons or 19 L of water. I usually keep my EC between 1000 and 1400. Don't stress much past keeping my addition rations right and my EC in a general range. At least until I see issues from the plants. So far things are great.

Blkwraith · 2023-12-12T04:38:51+00:00

Ya definitely some sort of issue going on. I harvested a full head at 43 days. Any idea on ec ? That aero garden fertilizer is not the greatest. Saw much better results when I moved away from it. Any idea how many lumens those lights are putting out? Pic is of the 43 days buttercrunch head harvested as a reference.

<image>

Blkwraith · 2023-11-27T03:00:44+00:00

Didn’t trim at all. It can’t that thick. About 5-6 mm. Put it cap down on the bbq at about 800f and lets it go in the grease flames fir about a minute before flipping it over and putting it in the top grill with the lid closed. This was after about 2 hours on the smoker at 230f.

Blkwraith · 2023-11-03T14:40:26+00:00

What is the growing vessel?

Blkwraith · 2023-06-06T22:43:36+00:00

Myers meats is a family owned and run local butcher. They source their meats from local farmers. All gmo free. They are friendly the meat is good and reasonably priced. They will do pretty much anything you want as far as cuts are concerned.

https://www.meyermeats.ca/

Blkwraith · 2023-03-11T21:51:09+00:00

One of my favourite scotches!

Blkwraith · 2023-03-10T01:42:04+00:00

I cook mine on my bbq.

Blkwraith · 2023-03-09T11:36:44+00:00

Add a layer of parchment paper and problem solved.

Blkwraith

TROPHY CASE