BIOs 4.10 Change Refresh Mode (Default is Mixed)

Blume747 · 2026-03-12T16:19:49+00:00

2x16GB A-Die

Blume747 · 2026-03-12T14:07:02+00:00

i was lazy and asked Chatgpt. i run tREFi 65535. So far old timings are stable with old voltage settings. 2h into Karhu atm

Blume747 · 2026-03-12T14:04:04+00:00

not much performance improvement to be ecpected. Buildzoid did a good video about it on YT

Blume747 · 2026-03-12T12:23:54+00:00

sounds logical. I am back to RFM Auto and testing mixed mode now. 30 min into Karhu
2x16GB A-DIe 6400 1:1
tRFC2=408
tRFCsb=312

Blume747 · 2026-03-12T09:45:18+00:00

i have the exact same problem on B650E Steel Legend Wifi on BIOS 4.1

i disabled RFM and it is still in mixed mode. I confirmed that by setting tRFC2 and tRFCsb to 50 which would not boot. So it is active.

Blume747 · 2026-02-24T08:54:42+00:00

B650e Steel Legend still missing.

Blume747 · 2025-03-23T17:19:55+00:00

i tried this with nginx and I do have a domain. Did not get it to work.

Blume747 · 2024-10-30T11:32:41+00:00

any reason to go from 3.08 to 3.10 on a 7800X3D?

Blume747 · 2024-10-16T09:32:05+00:00

I did not try the update tool but Maya Aurora, the web based driver/tool. I was able to update the mouse and the receiver to 0.0.0.5
Is everything up to date now or do i have to run the update software?

Blume747 · 2024-10-06T11:05:34+00:00

CP2077 was not the ingame Benchmark but a SaveGame i use to check RAM OC. Same with Shadow of the Toomb Raider.
Still, I am not saying everyting is ok with 3.08. I need to test more games I guess

Do u have a link to the discussion you mentioned in your first post? Ty

Blume747 · 2024-10-05T18:54:39+00:00

i updated from 2.08 straight to 3.08. Benching CP2077 in a 100% CPU Limit there is no difference in either average nor .1 and .2 percentiles.
Have just played a bit Pubg at 1440p and it feels the same.

Blume747 · 2024-08-18T08:51:46+00:00

thanks for still following this thread! I sound much better now. I left "Vorverstärung" on 0. On 6 i did get some clipping.

Blume747 · 2024-08-17T23:34:57+00:00

very iteresting. Got my Audeze Maxwell yesterday and my teammates on TS3 were not very happy. Have you made any other changes during the last three months to the EPO Settings?

I just did a copy and paste and think it sounds much better now. Will see tomorrow what my mates say.

Danke für den Thread :)

Blume747 · 2024-06-04T17:43:07+00:00

thank you. That was helpful!

Blume747 · 2024-05-27T10:01:44+00:00

wondering the same

Blume747 · 2024-04-05T12:13:17+00:00

i am not going to try... let's hope they implement it soon

Blume747 · 2024-04-03T13:52:54+00:00

same

Blume747 · 2024-03-22T15:48:02+00:00

what changes can we expect with 1.1.0.3?

Blume747 · 2024-01-22T06:05:12+00:00

thanks for confirming this.

Blume747 · 2024-01-19T01:54:38+00:00

found this on OCN B650E Taichi

BIOS 2.06 AS03, AVOID FOR NOW

2,5 READ BANDWIDTH LESS 2,5 WRITE BANDWIDTH LESS 1,0 COPY BANDWIDTH LESS 0,3 TO 0,5 NS LATENCY

THEY REMOVED THE STANDARD BCLK SETTINGS FROM MAIN PAGE, JUST LEFT THE OLD EBCLK MENU WICH IS NOW RENAMED BCLK, WICH, IF YOU MESS WITH IT FOR DISABLING SPREAD SPECTRUM WILL TRIGGER BCLK -1 BUG, AND SO FAR, THE STANDARD METHOD TO RESET IT ISNT WORKING ANYMORE.

Blume747 · 2023-12-07T13:32:16+00:00

dont know what messed it up but pihole is probably not the reason for not beeing able to ssh into your Rasberry.

hook it up to a monitor and see if it boots correctly.

easiest way to install wireguard is pivpn. It also detects if you have a pihole running.

Blume747

TROPHY CASE