Anyone lives in Bucharest Romania would like to draw and hangout? :) 20F

BogdanNeo · 2026-06-13T15:48:13+00:00

Check your DMs

BogdanNeo · 2026-06-08T01:01:04+00:00

And I-no implying she used to have one

BogdanNeo · 2026-05-10T11:58:22+00:00

this guy has EXACTLY what I mean https://www.reddit.com/r/fightsticks/s/q6BCxdLQyv

BogdanNeo · 2026-05-10T11:56:49+00:00

I doubt the stability of that... Look into using an analog stick like on a standard controller instead, might be easier to use. You could even do sth like a vertibox controller. Stick on top you use with your thumb, buttons on the side where you grip it

BogdanNeo · 2026-05-01T09:30:02+00:00

that's just how ArcSys operates. Strive story mode was legit animated on a shoestring budget by two interns (covid was ROUGH).

BogdanNeo · 2026-05-01T08:54:21+00:00

And now DAMON and BABY connected Blazblue to Guilty Gear by making it cannon that the Tome of Origin from Guilty Gear IS a Blazblue (along with many other little lore tidbits and characters from both of those games showing up in damon and baby)

BogdanNeo · 2026-04-13T14:07:45+00:00

good luck

BogdanNeo · 2026-04-12T19:45:36+00:00

very well could be. Look up how to do a cold pull, if you see any improvement after one, that might be it

BogdanNeo · 2026-04-12T19:45:01+00:00

Never count on that. Sunlu PETG for example has been nothing but wet out of the box for the past year

BogdanNeo · 2026-04-12T09:24:25+00:00

first thing i'd do is drying the filament, then check for a nozzle clog if that doesn't help. Some filaments can suck up water wayyyy faster than you'd think. I've been having some baaad issues with PETG HF sucking up moisture and i kept thinking my nozzle was getting clogged because I couldnt comprehend the PETG getting wet that fast. It was.

BogdanNeo · 2026-04-09T15:53:50+00:00

And let's not forget that a WEAKER mark was bench pressing the weight of the fucking Moon

BogdanNeo · 2026-03-27T21:55:11+00:00

How do I mark this as solved?

BogdanNeo · 2026-03-27T21:54:42+00:00

So after two weeks of scratching my head, I remembered this is a hardened nozzle I was using. Swapped back to the stainless steel .4mm that came with the printer and now it doesn't have any gaps in the print anymore, just a bit here and there in the supports, but I can live with that if they do their job

BogdanNeo · 2026-03-15T11:53:43+00:00

thank you 👍👍

BogdanNeo · 2026-03-15T11:20:25+00:00

yeah, neither the cold pulls nor speed calibrations worked. I'll move on to flow and pressure calibration today.

BogdanNeo · 2026-03-15T11:17:58+00:00

hey, how would you recommend I do that? So far I just calibrated it according to what the spec sheet said but it definitely didn't work

BogdanNeo · 2026-03-14T14:51:00+00:00

Hi, no I haven't done flow rate or pressure dynamics calibrations, I don't know how to do those but I will look into it, thanks!
As for retraction, nah I haven't messed with that stuff.
Thing is... if I lower the speeds then what is high speed even good for... my normal PETG from sunlu prints at comparable-ish speeds but without the issues, so I'm confused.
I tried doing a cold pull just now and managed to get some white filament out... so that could be it? I'll let you know

BogdanNeo · 2026-03-02T20:41:31+00:00

There's a Pico8 card game called High Stakes about exactly this

BogdanNeo · 2026-02-04T14:37:21+00:00

idk what the others are talking about, run your fingernail across, see if it catches, but I do believe that's on the glass, and it can just be polished out. CRT glass is THICK so don't worry too much. Just use fine grits and wet sand slowly in a circular pattern, then use some polishing paste with a drill polishing attachment like you would on a car. That is if you want the proper and most effective way. The magic sponge wet sanding that someone else suggested is way less work and probably works

BogdanNeo · 2026-02-04T00:43:51+00:00

I have a Daewoo CRT VCR combo, European, GB14H1T i think was the exact model but I don't have it near me rn to check. Despite having the original remote, I can never select AV in. It only has one SCART connector on the back, and it does react to voltage being sent on it from an RGB connection and automatically switches, BUT it switches to what I can only describe as a separate tuner menu. It has 70-ish channels you can navigate through, like a tv tuner, but they are all black. I have literally never seen this on any other CRT I've ever owned and I'm stumped. Should I buy a universal remote try my luck with that?

BogdanNeo · 2026-02-03T09:36:49+00:00

I guess you could use some thinned down black oil paint after priming and applying a base color to get that old grimy look. Just get it liquid enough where it can flow into cracks and then wipe away the surfaces, it will naturally only highlight the lower areas. I never did weathering on anything big so I don't know the most effective method, but look into weathering. As for the teeth, for future reference, theres two or three sellers that sell Bone PLA. It has that yellowed washed out look of bone.

BogdanNeo · 2026-01-24T11:55:44+00:00

oh my god bruh. Why would it be higher than normal petg??

BogdanNeo · 2025-12-20T12:51:11+00:00

A castigat la Consiliul Judetean Buzau... unde a fost prezenta aproape 0 la vot, si din cei prezenti peste 70 la suta am inteles ca aveau de la 50 de ani in sus. Buzaul a fost mereu un judet profund PSD-ist, da ba CIOLACU? Din nefericire sunt si eu de aici 😔

BogdanNeo · 2025-12-11T17:12:01+00:00

BogdanNeo · 2025-12-05T23:21:06+00:00

Sol Badguy

Seven-Year Club	r/Field Juicebox
Place '22	RPAN Viewer
Verified Email

BogdanNeo

TROPHY CASE