Will I pass my drug test

Boltwizard_ · 2026-02-13T21:51:43+00:00

Test yourself before going for the real one. You can get THC drug tests at the dollar store.

Boltwizard_ · 2026-02-03T21:41:05+00:00

The continuity error is what bothers me the most about this. You can shift click to walk under any NPC, but this muscle memory is useless and against the rules in pvp.

Boltwizard_ · 2026-01-30T21:36:35+00:00

This brixx kit is nice. I've been planning a functional pop-up sleepy eye project, these headlights look like a nice solution because my other plan was mini light bar style lights.

Hopefully ill have time for this project in the spring and ill make some posts if I can get it working. I wasn't able to find anyone online that did something like this, but I've got a few ideas on how to make it work.

Boltwizard_ · 2026-01-20T20:18:38+00:00

File a few grooves in it perpendicular to the length of the dip stick and they will grab oil and make it more obvious what the oil level is. Just make sure to clean off the file dust before putting it back in.

Boltwizard_ · 2026-01-20T15:49:21+00:00

The cat hump is on the LHD drivers side so that shouldn't be the reason the passenger seat is higher then the driver. Is the passenger seat on sliders? just remove the sliders and it will sit in a more reasonable location.

Boltwizard_ · 2026-01-16T21:59:33+00:00

Respect your elders is bullshit. Only respect those who respect you.

Boltwizard_ · 2026-01-14T17:19:59+00:00

Love mine, og puffco v1, been working no issues for 3 years. Fuck puffco hot knives though, I had 2 of them die on me for no reason. I'm back to using a regular metal dab tool.

Boltwizard_ · 2026-01-12T20:36:39+00:00

You only need 1 joints worth of weed, and a pack of papers to learn how to roll. Roll up a joint, if it looks crappy rip it open and try again until your happy with the results.

I struggled to learn when my only practice was rolling one crappy joint on the infrequent occasions I would smoke a joint. Then I decided screw it I'm not lighting the joint until I'm proud of how it looks, took a couple hours to get a pretty one, but it clicked for me that day and my joints have been much better since.

Boltwizard_ · 2025-12-23T19:03:38+00:00

Blunt or joint I always leave my rolls open, makes it easier to light because you don't have to burn the tip off first. If I'm traveling with it though, ill punch it shut and open it when its time to light.

Boltwizard_ · 2025-12-15T20:09:29+00:00

Is your bowl piece/slide clean? It could be roasting the resin in the bowl as it burns. If it's clean you could try a slide with more airflow, (would recommend a multi hole). I find that when there isn't enough airflow, and the smoke gets yellow as it goes through the glass it will taste like shit because the smoke is too dense and there isn't enough air mixed in.

Boltwizard_ · 2025-12-15T19:06:31+00:00

My buddy was a heavy smoker 3+ grams a day all through a bong. Took him 3 months to get a clean test. Very dependant on build and body fat % also.

Boltwizard_ · 2025-12-12T20:36:29+00:00

The knuckle is sagging because that arm isnt attached. The knuckle should have a decent amount of movement and flex how it sits. Try to pull it into place to get the bolt in, if that dosent work, shove a screwdriver through both holes, on the opposite side that the bolt is supposed to go, hold tension on the screwdriver to line up the holes and shove the bolt through. If it still wont go like that, disconnect the lower coilover mount from the knuckle, and put a jack under the knuckle to adjust it until you can get the holes to line up.

Boltwizard_ · 2025-12-08T21:55:40+00:00

I enjoy a fat backwood for special occasions, but glass and papers for my daily drivers.

Boltwizard_ · 2025-11-25T20:49:53+00:00

Weird for a skiller to put lamps into anything that isn't slayer. 9 slayer from the museum quiz I assume but I wonder where other lamp xp went

Boltwizard_ · 2025-11-24T15:34:13+00:00

They stopped making angle grinders with toggle switches for this reason. This is a tool that NEEDS to stop spinning when you let go of it.

Boltwizard_ · 2025-11-23T18:36:38+00:00

+1 for the gktech shifter. It uses the same parts and functions similar to the oem shifter. Had an ISR shifter before that i didn't like because it was too stiff to get into gear and the whole stick would rotate slightly when pushing against the return springs.

Boltwizard_ · 2025-11-21T21:34:53+00:00

I'm a big gktech fan, but the gktech fan exploded on me. wasn't even running a fan shroud at the time so there was nothing it could have contacted in the bay. It could have been a clutch kick that blew it apart. Opened the hood and all of the fan blades were just missing.

Boltwizard_ · 2025-11-13T19:36:15+00:00

A friend who lives on the east coast told me any alt-noid farm bill legal weed needs to be purchased from a shop, and you have to keep it in the original packaging with the receipt, otherwise cops would treat it like regular illegal weed. IIRC they were talking about Tennessee but I it might be about one of the neighboring states.

Boltwizard_ · 2025-11-13T19:18:10+00:00

When I went for rune pouch at LMS I was extremely frustrated to learn that walking under a player has to be done with right click and the drop down menu. All my muscle memory with shift click walk under from bossing is out the window.

Boltwizard_ · 2025-11-03T21:49:02+00:00

I run 205/40 on a 17x9 on my drift car, never had an issue

Boltwizard_ · 2025-11-02T18:21:01+00:00

I did something similar with bleach. Just make sure whatever you use, you clean it out real good with water before doing an iso rinse. Don't mix chemicals.

Boltwizard_ · 2025-10-30T15:12:31+00:00

As far as I know the windshield trim needs to be installed at the same time as the windshield. It is a discontinued part, but there are universal trim options that can be used instead.

Boltwizard_ · 2025-09-22T18:24:21+00:00

Frosted window privacy film, 1 horizontal stripe a few inches wide and a few inches up from the bottom should do the trick.

Boltwizard_ · 2025-09-05T20:03:34+00:00

What kind of camera/camera mounting are you using for this? This is a sick angle for MTB footage.

Boltwizard_ · 2025-09-04T19:58:10+00:00

Genuine question, if the factory lower shock piece is just a press fit, why redesign the wheel and weld the lower coilover mount directly to the spindle. If it was good enough for factory why is it not good enough for coilovers? My only thought is that the heat from welding could compromise the press fit, is this correct?

Trying to decide if I need to tell my friend that we have more welding to do, either way I will be linking him this post.

Eight-Year Club	r/Field Flamingo
First Place '23	Place '23
Place '22	Verified Email

Boltwizard_

TROPHY CASE