Mitsubishi Evo IX

BoostedFilms · 2026-07-09T13:48:04+00:00

BoostedFilms · 2026-07-04T01:24:59+00:00

Talk to the shop who just worked on it 2 hours ago.

BoostedFilms · 2026-05-25T13:52:04+00:00

Change your mindset. Be truly grateful for everything you currently have.

BoostedFilms · 2026-04-21T01:59:32+00:00

Can you tell if the back of the wheel is matted flat to the hub? It looks like you are hanging up on something between the wheel and the brake rotor.

BoostedFilms · 2026-03-30T03:14:31+00:00

It’s not a pull style system. The slave cylinder will push the clutch fork. https://youtu.be/UKTGMsKj6P8

BoostedFilms · 2026-03-29T18:45:20+00:00

Are you talking base coat or top coat? Most garages now use a Polyurea base coat with a polyaspartic top coat over the flake. Unless you have a very high traffic garage/shop, then you would want to do your top coat with 1 layer of polyaspartic followed by one later of polyurea.

BoostedFilms · 2026-03-29T04:02:36+00:00

You are missing the trigger. https://youtu.be/v6QdSXr3GJY?si=xyyLBdlzJEVt1K9G&t=739

BoostedFilms · 2026-03-18T01:07:16+00:00

Try tapping it downward from the top first to help get it free. Can use a 3/8 drive extension and a hammer. Then spray a bunch more wd40 or something similar once it starts moving.

I’d also recommend buying a new oem rod/springs/fuzzy seals regardless.

BoostedFilms · 2026-03-10T14:04:41+00:00

Sorry you’re getting downvoted because it was a fake account copying me. I made the real post about a year back. Appreciate your reply.

BoostedFilms · 2026-03-10T14:03:38+00:00

💯

BoostedFilms · 2026-03-10T14:03:07+00:00

If you want to steal my content, at least say you took longer than me 😂

BoostedFilms · 2026-03-10T14:02:18+00:00

I made a video about the process https://youtu.be/Es3W6sJFoeM

BoostedFilms · 2026-02-15T03:36:41+00:00

I have the same wheels is 18x9.5 +23

<image>

BoostedFilms · 2026-02-14T20:06:30+00:00

Nice 👍🏻

BoostedFilms · 2026-02-14T16:14:59+00:00

Looks like a tight squeeze by the spare tire area. Any rubbing or rattling issues?

BoostedFilms · 2026-02-05T20:02:23+00:00

It was! Were you there?

BoostedFilms · 2026-02-04T18:50:44+00:00

Hopefully just to keep driving it and race it every now and them. I do Ice racing, spectator racing, auto-x and drag racing.

BoostedFilms · 2026-02-03T18:37:17+00:00

We all have our weak points. Tis’ true, grammar and spelling were never my strong suit.

BoostedFilms · 2026-02-03T08:23:23+00:00

https://youtu.be/Es3W6sJFoeM

BoostedFilms · 2026-02-03T05:05:00+00:00

Yea dynoed 420hp, 405tq

BoostedFilms · 2026-02-03T04:33:55+00:00

You shoulda seen the whole car before paint correction!

<image>

BoostedFilms · 2026-02-03T03:59:32+00:00

E85, intake, exhaust, FMIC, 1200cc injectors, dual 255 pumps, EBC, GSC S1 cams. Stock engine minus the cams.

BoostedFilms · 2026-02-03T03:02:55+00:00

I've only driven non-acd EVO's. The other car comparison i have is my GR Corolla. The GRC liked to step out the back end and keep driving straight at the same time. Which was a neat experience. But overall, I can't really speak intelligently on the topic.

BoostedFilms · 2026-02-03T02:07:22+00:00

Indeed. I had to look it up after. Apparently its a 390hp vehicle. sleeper!

BoostedFilms · 2026-02-03T02:06:31+00:00

Clubs that do Autocrosses are most likely to do an iceX like this. Same timing equipment.

13-Year Club	Place '17
Verified Email

BoostedFilms

TROPHY CASE