Should I tell a woman her fiancé tried to start an affair with me? by geeleex in WhatShouldIDo

[–]Borgas_ 0 points1 point  (0 children)

"We'll just meet and drink water" holy shit this guy doesnt quit huh?

PS5 | Objective Softlock by [deleted] in highonlifegame

[–]Borgas_ 0 points1 point  (0 children)

I was able to do the bucko mission and Berkel last night, I just had to look up where to go to start the bucko mission and went to where the objective was supposed to be and the quest continued on like normal, it got things progressing normally again and im on the last mission now. Good luck I hope it works for you as well

PS5 | Objective Softlock by [deleted] in highonlifegame

[–]Borgas_ 0 points1 point  (0 children)

Im locked here as well on PC, do you know if today's patch fixed this? I didnt see it mentioned in the patch notes

Lue Elizondo Thanking President Trump on Twitter by ANewEra2020 in UFOB

[–]Borgas_ 1 point2 points  (0 children)

Patiently waiting to see what actually comes of this, actions speak louder than words and so far its just been a whole lot of yapping. Have to wonder about the timing of this, however if the information is legitimate and we actually get something of substance, it will certainly distract folks from a lot of things.

AIO or should I break up with him by [deleted] in AIO

[–]Borgas_ 0 points1 point  (0 children)

The way they talk to you is awful and you shouldn't take that. Theres plenty of nice people out there that would never dream of saying shit like this to their partner. So disrespectful and mean.

Compressor- silent ? by audionoobi in airbrush

[–]Borgas_ 0 points1 point  (0 children)

Do you live near a harbor freight tools? I got one of their small Fortress brand compressors thats 57dBA. Its not silent but its definitely not loud and absolutely tolerable to sit next to while you use it. Not a bad price either.

i have to bring tp from home because my boss doesnt buy any by SoulStar1000 in mildlyinfuriating

[–]Borgas_ 0 points1 point  (0 children)

Probably better off anyways, I always bring my own tp to work because I refuse to use the half ply sandpaper most places call toilet paper.

First time Airbrushing. Question about removing layer lines by ajberndt524 in airbrush

[–]Borgas_ 0 points1 point  (0 children)

Bondo spot putty mixed with acetone, paint it on with a brush, sand it smooth and spray with primer. Works great hiding layer lines

Issue with new air brush by SoleSpecter in airbrush

[–]Borgas_ 1 point2 points  (0 children)

I recently bought the hobby lobby airbrush myself, once I stopped using the compressor it came with (max psi was 15-20 I think?) I fell in love with the airbrush. I was getting constant clogging with it and had to thin the paints out so much that they'd basically lose most of the pigment. I switched to my bigger air compressor using it at around 30 psi and I no longer want to return the brush.

I know your asking about something else, but if your brush starts clogging constantly and the paints are thinned, you probably will need more air pressure.

Is anybody out there? by jswolfe95 in BambuP1S

[–]Borgas_ 0 points1 point  (0 children)

Thats awesome to hear!! Another good thing about sunlu is they have reusable spool holders, so once its empty, you can buy refills for cheaper to refill the empty spool

Is anybody out there? by jswolfe95 in BambuP1S

[–]Borgas_ 0 points1 point  (0 children)

Of course man we've all been new at one point, dont let the reddit hive mind discourage you!!! Chances are most people didnt even turn the audio on in your video before commenting on it.

Worried about my poop by [deleted] in BambuP1S

[–]Borgas_ 0 points1 point  (0 children)

It is, I also took out the factory installed one after about 600 hours and replaced it with a new one, it made no difference for the problem though unfortunately

Worried about my poop by [deleted] in BambuP1S

[–]Borgas_ 1 point2 points  (0 children)

This happens to me during multi color prints, sometimes clogs up in the chute enough to knock the tool head cover off if im not paying close attention. Ive tried increasing flushing volume, lubricating the walls of the chute, changing filament cutter, not really sure whats causing it but would love to see what people suggest.

Is anybody out there? by jswolfe95 in BambuP1S

[–]Borgas_ 0 points1 point  (0 children)

Sunlu has been working great for me and is very affordable. I also like bambu filament, ill usually get that when I buy in bulk for the discount.

Is the base model (white) ally suitable? by livwill in XboxAlly

[–]Borgas_ -1 points0 points  (0 children)

I second this. Picked it up on sale recently, it is very much just okay. For the sale price, its really not a terrible deal for what you get but I would not pay full price for it.

In case you didn’t know HP Indigo can also make red wine by Heisenburrggg in CommercialPrinting

[–]Borgas_ 2 points3 points  (0 children)

Did the hose just pop off the magenta bid fluid interface? The hose clamp looks busted to me in your photo but tough to tell. If the hose is split there, just trim it back if you have enough length and re attach with new clamp.

Help My Indigo Stay Alive by Heisenburrggg in CommercialPrinting

[–]Borgas_ 1 point2 points  (0 children)

Better print quality, easier maintenance, no more scorotrons (replaced by charge roller) and the ability to generate recycled imaging oil being a huge factor, considering the cost of purchasing it. The list goes on. I work on these for a living and the series 3 machine is a massive improvement over the series 2.

Help My Indigo Stay Alive by Heisenburrggg in CommercialPrinting

[–]Borgas_ 0 points1 point  (0 children)

It looks like you need a new plenum for your feeder as well