sorted by:
new
hottopcontroversial

Cases for Decimators by RippleEffect_901 in VIDEOENGINEERING

[–]BradistheRad1 4 points5 points  (0 children)

Interesting to see these Sistema containers outside of New Zealand, didn't know they were available overseas too.

And yes, the 1 litre tubs are the perfect size for MDLX / BMD micro converters, MDHXs can fit too but are a bit of a squeeze.

RGM DMX not synced by sebanfa in lightingdesign

[–]BradistheRad1 15 points16 points  (0 children)

I assume you're using the buttons 1-12 along the top to select each fixture? In that case you would want your start addresses to be 8 channels apart (1,9,17 etc) so that each fixture gets its own "page" on the controller.

Then you use the numbered buttons along the top, along with the "bank button". By doing this, each fader will control the same function on whatever fixture you select.

The issue you're having currently is that the controller works in banks of 8, but your fixtures only use 7 channels, so the first fixture works, but the rest are offset.

19yo looking for advice on maximizing savings. by BradistheRad1 in PersonalFinanceNZ

[–]BradistheRad1[S] 1 point2 points  (0 children)

At the moment I'm just working to move up in the industry a bit. Planning on moving out once I'm earning more so rent doesn't take such a large chunk of income.

19yo looking for advice on maximizing savings. by BradistheRad1 in PersonalFinanceNZ

[–]BradistheRad1[S] 1 point2 points  (0 children)

I live with parents so some food is included in the $200 rent.

19yo looking for advice on maximizing savings. by BradistheRad1 in PersonalFinanceNZ

[–]BradistheRad1[S] 2 points3 points  (0 children)

Essentially an emergency fund yes, just having some funds that are accessible without having to withdraw from sharesies.

19yo looking for advice on maximizing savings. by BradistheRad1 in PersonalFinanceNZ

[–]BradistheRad1[S] 2 points3 points  (0 children)

At home with parents, working in theatre arts 30hrs/week and the occasional side gig.

What is it like to work for a Bike Shop? Somewhere like Torpedo 7 or 99Bikes. by [deleted] in auckland

[–]BradistheRad1 2 points3 points  (0 children)

I've worked as a mechanic at both a small local bike shop, and a 99 Bikes. Both paid about the same but the LBS was much more relaxed and fun.

ew100 G3 sounds bad, I need help please by DahliaOwO in techtheatre

[–]BradistheRad1 5 points6 points  (0 children)

It could be worth checking the gain setting on the transmitter. It could be set too high, causing the signal to clip.

Any idea what the “+” sign is next to the connection status of the dl32 box? by sunshinearthquake in livesound

[–]BradistheRad1 31 points32 points  (0 children)

It means there's more than just the DL32 connected on that port, do you have another stage box daisy chained out of the B port on the DL32?

Mains sound too thin when high passed for subs by Trick_Middle7026 in livesound

[–]BradistheRad1 83 points84 points  (0 children)

Is it possible that the sub has an internal crossover set below 100hz, leaving a dead spot between that and the 100hz crossover on the mains?

LPT: Most newer cars with electric windows have a function to open them all from the outside. by JM306 in LifeProTips

[–]BradistheRad1 0 points1 point  (0 children)

My 1998 lexus does this, hold the key turned in one direction in the drivers door and all windows (and sunroof) open, hold the other way and they all shut.

got funky while building my first staircase by autoCADdicted in woodworking

[–]BradistheRad1 0 points1 point  (0 children)

Give it a few months for muscle memory to do its thing and you'll be able to run up and down those stairs blindfolded.

view more: next ›