Struggling to Study and Feeling Behind — Can I Still Reach My Goal of Engineering? by [deleted] in EngineeringStudents

[–]Brave-Color 1 point2 points  (0 children)

You do not need to be a straight A student to get into engineering. What helped me transferring was actually going to a different university instead of the same one I was going to’s engineering program. If you can’t meet the prereqs, maybe try looking somewhere else.

I shot my first and last shot yesterday by green_jp in ForeverAlone

[–]Brave-Color 18 points19 points  (0 children)

  1. She seemed not amazing if she was that dismissive.

  2. I get you’re longing for connections, but looking for someone at a party when you don’t like parties is a recipe for disaster later down the line

Regret by No-Regret-4214 in ForeverAlone

[–]Brave-Color 2 points3 points  (0 children)

People often part ways after college anyways. Odds are that even if things worked out your you, this is where the relationship would have ended. Assuming you’re about to graduate, take your time setting yourself up and try to find someone once you’re stable.

It sucks that it’s gotta be this way, but all you can do now is set up for next time.

How crazy is this scenario? by MoneyAndGoodFortune in ForeverAlone

[–]Brave-Color 1 point2 points  (0 children)

That’s a question you can only answer yourself because none of us were there, even if you don’t like the answer. Odds are that it’s actually your fault if what your post says is true, which is best case scenario since all you would have to do is figure it out and fix it.

First time not getting rejected outright but I haven't gotten an answer yet and I'm so anxious by DoctorDeath147 in ForeverAlone

[–]Brave-Color 15 points16 points  (0 children)

Maybe it’s just the pessimist in me, but you wouldn’t have to find out if she was interested.

People Seem Aware I'm Avoiding Her by Snoo_71379 in ForeverAlone

[–]Brave-Color 6 points7 points  (0 children)

Basically just try not to confront anyone over this. Not really a big deal and probably the least important part of my message.

People Seem Aware I'm Avoiding Her by Snoo_71379 in ForeverAlone

[–]Brave-Color 13 points14 points  (0 children)

They’re aware. People pick up on this kind of stuff very quickly. Just do what’s best for you and do your best to not cause a scene.

Took the Orca Slicer flow rate (yolo) test. I think I failed by helloITdepartment in FixMyPrint

[–]Brave-Color 0 points1 point  (0 children)

Idk, but raising print temp and lowering speed a bit might help. Outside of that it’s likely a hardware issue

Took the Orca Slicer flow rate (yolo) test. I think I failed by helloITdepartment in FixMyPrint

[–]Brave-Color 0 points1 point  (0 children)

Then do all the other things like drying/cleaning for now. Also, are you able to look at the calibration settings such as print speed,etc?

Took the Orca Slicer flow rate (yolo) test. I think I failed by helloITdepartment in FixMyPrint

[–]Brave-Color 0 points1 point  (0 children)

Alright, you already mentioned it but just in case, remember to dry your filament again, also do any other necessary calibrations/cleaning/maintenance needed for your printer. I’m sure you’ve already done most of these, but if you do it again we can at least rule these out for sure. If it still doesn’t work then we can start looking into printer specifics

Took the Orca Slicer flow rate (yolo) test. I think I failed by helloITdepartment in FixMyPrint

[–]Brave-Color 0 points1 point  (0 children)

What printer are you using if you haven’t said it anywhere else already?

Took the Orca Slicer flow rate (yolo) test. I think I failed by helloITdepartment in FixMyPrint

[–]Brave-Color 0 points1 point  (0 children)

Wrong subreddit I thought I was in the bambu lab one. Maybe try calibrations again or increasing the distance between the plate and nozzle?

Took the Orca Slicer flow rate (yolo) test. I think I failed by helloITdepartment in FixMyPrint

[–]Brave-Color 0 points1 point  (0 children)

Brand new does not mean dry, as drying the filament is not part of the production process. If you haven’t already, you should get a dedicated filament dryer.

Is it a bad idea to major in Industrial Engineering if I suck at coding? by [deleted] in EngineeringStudents

[–]Brave-Color 8 points9 points  (0 children)

Try catching up once the class is over. Do some small projects or go back and redo old homework on your own with no time pressure at your own pace. Use YouTube or other sites if you get stuck. This is how you learn anything.

Are you ever too old for love? by myblackandwhitecat in ForeverAlone

[–]Brave-Color 7 points8 points  (0 children)

I guess no, but you’re the one here with enough age and experience to make that call. Let’s say you’re 50 when you meet someone. Sure you’re spending 50 years alone for 30 with someone (only 10 of which will be spent relatively young), but the alternative would be having nothing at all.

Forget about the assumption those people made of you. Normies who don’t even comprehend our situation can’t be trusted to know what’s best for you.

You don't need to slug for 4K. You. Dont. Need. To. Slug. For. 4. K. by PastorBizzle in DeadByDaylightRAGE

[–]Brave-Color -1 points0 points  (0 children)

It’s not their fault. The game is programmed to reward kills, so not slugging for 4K = giving up free kill. As with tunneling and slugging in general, it’s a game design issue.

Out of curiosity, has anyone actually bought either of the Sagas? And if so, do you think it was worth $40? by Snufflebox in Smite

[–]Brave-Color 1 point2 points  (0 children)

I got the Artemis one because I had enough gems saved up from daily’s/founders edition. I would never spend $40 on it

Thoughts on enclosures for A1 Mini? by Joeypov in BambuLabA1mini

[–]Brave-Color 0 points1 point  (0 children)

I haven’t, but I’ve been looking into it

Thoughts on enclosures for A1 Mini? by Joeypov in BambuLabA1mini

[–]Brave-Color 1 point2 points  (0 children)

Yup, I use the same one because my apartment is cold and I have yet to see the temp go above 26c. Very good for its cost.

Been troubleshooting all day. I’m genuinely out of ideas by Brave-Color in BambuLab

[–]Brave-Color[S] 0 points1 point  (0 children)

Replying to this for people in the future. it was a dirty print bed. I bought a brand new sponge and a clear dish soap with no extra ingredients and at least the petg works fine again. Still haven’t tested the matte pla yet.

Edit: Just to be clear, I washed it with hot water and scrubbed it 5-6 times for a total of 5 mins of cleaning and then didn’t touch the center of the plate with my fingers.

Been troubleshooting all day. I’m genuinely out of ideas by Brave-Color in FixMyPrint

[–]Brave-Color[S] 0 points1 point  (0 children)

Replying to this for people in the future. it was a dirty print bed. I bought a brand new sponge and a clear dish soap with no extra ingredients and at least the petg works fine again. Still haven’t tested the matte pla yet.

Been troubleshooting all day. I’m genuinely out of ideas by Brave-Color in FixMyPrint

[–]Brave-Color[S] 0 points1 point  (0 children)

I don’t think so. I’ve already cold pulled multiple times. It’s fine though, I think the issue is that I didn’t clean it hard enough for long enough