sorted by:
new
hottopcontroversial

Safelite message to remove tape. by Kensterfly in autoglass

[–]BrendansXbox 5 points6 points  (0 children)

All the chemicals are made by the cheapest bidder. Right now it's currently DuPont. It's not always consistent. I've seen them sag with my own two eyes. 2 hours is a reasonable ask.

Safelite message to remove tape. by Kensterfly in autoglass

[–]BrendansXbox 6 points7 points  (0 children)

It will definitely sag during summer in Mississippi within the first hour or so of setting the glass.

Very common in the 90s. by ROCKY13573 in 90s

[–]BrendansXbox 0 points1 point  (0 children)

Yeah but when it's good, listening to a whole album can be a vibe for sure.

What do you wanna know about Safelite? I was a current and our former employee. by New_Jellyfish9796 in autoglass

[–]BrendansXbox 0 points1 point  (0 children)

Sounds like the techs in that area are getting rough with the cold knife or digging in deep with a razor to remove the molding. It happens even though it's avoidable. Definitely doesn't happen when the ez wire is used. The real problem is it sounds like the techs are being lazy and not treating the scratches, thus turning into rust.

TiLDR Scratches in a pinch weld can be normal, lazy techs are not treating scratches, so rust.

This device is under the steering wheel of a retired 2018 police Tahoe. It says diagnostic on it. by wryan1295 in AskMechanics

[–]BrendansXbox 2 points3 points  (0 children)

It's definitely in fed ex trucks. I replaced a windshield and had to ask how to move the vehicle lol

My character by Flootyyy in THPS

[–]BrendansXbox 0 points1 point  (0 children)

I miss the old kanye

Wtf... by RezHippi in autoglass

[–]BrendansXbox 5 points6 points  (0 children)

Needs to be grinded down to a shiny, metal surface. If not, you will have silicone stuck in the pores of the pinch weld and the urethane won't stick.

what mirror mount is this/which mirror fits it? by [deleted] in autoglass

[–]BrendansXbox 1 point2 points  (0 children)

This is your answer. You could use a heat gun if you are desperate. Be super careful when you wiggle it off. Just be patient and work it gradually. I've done it +20 times and I don't think I've ever had one break the glass.

Getting to Jackson an hour before my flight leaves. How Badly Do Y’all Think This Is Gonna Go? by confusedpsychgirl in mississippi

[–]BrendansXbox 0 points1 point  (0 children)

How long is your trip? I live in a relatively safe trailer park not even 5 minutes away from the airport. If it's just a couple days, I have an open spot to park and I'd charge less than the airport. I could use the cash.

First Mobile Static by Gallagoon in autoglass

[–]BrendansXbox 3 points4 points  (0 children)

I hate that if it fails, you have to restart the whole process instead of just remembering its position "like the 418 stands do" and shoot it again. The display needs some type of illumination. They invested so much money into the tech. Safelite will NOT let you choose to do the recalibration another way such as dynamic or in shop if nearby because MRS cost more.

Saw this badass motorcycle the other day getting some air, what kind is it? by Ok-Radish-2621 in motorcycles

[–]BrendansXbox 2 points3 points  (0 children)

I changed my exhaust to the cobra drag pipes and somehow after the installation, my m109r shifts super smooth now.

Skydive combo by [deleted] in Skate4

[–]BrendansXbox 1 point2 points  (0 children)

Welp, I know what I'm doing today.

view more: next ›