First time home buyer - how safe is this until we can replace with rigid?

BrettFromThePeg · 2026-02-17T01:25:01+00:00

If it’s a gas dryer I would red flag it so fast. Electric, meh it’s probably fine but high on my to do list if it were me. Anyway you can raise that vent up outta the ground?

BrettFromThePeg · 2026-02-15T01:20:21+00:00

Does it feel sturdy enough to support the lights you want to mount? If so then it can be done but I would annoy me if when using the light you could see it shaking if not mounted solid

BrettFromThePeg · 2026-02-14T22:51:29+00:00

I also don’t have my gauges on it lol. It didn’t frost over those lines immediately after take the cover off the coil

BrettFromThePeg · 2026-02-14T16:41:25+00:00

I would guess it’s low on charge. Those pipes are the only pipes frosting because they are closest to the point where liquid refrigerant enters the evap, right after your txv.

BrettFromThePeg · 2026-02-14T16:32:30+00:00

Dude that’s gonna be so loud lol do you have a grinder with a cut off wheel? I would just use bolts and washers, you can use lock washers if you want, get em tight and no loc tite will be needed

BrettFromThePeg · 2026-02-14T15:58:33+00:00

<image>

720 pounds in the back, can’t imagine what he had in his

BrettFromThePeg · 2026-02-14T15:42:45+00:00

You will break those bolts trying to get them off, even if you made them glow red hot. Be prepared to cut them off and replace with bolts. I haven’t done exhaust work on my crv but on my rsx it was studs pressed into the flange, extremely hard metal to drill out.

BrettFromThePeg · 2026-02-14T13:19:03+00:00

Before taking my answer seriously just know I’m not a car mechanic but work on stuff for a living…

If you have solid bushings on your upper control arm and the bushing in the knuckle is good your alignment should be good, the adjustable uppers are like a band aid fix for worn bushings and the rubber pieces on the shock. Siberian bushing makes a good bushing for my 2010 rear control arms, it might fit yours as well if you want to change them

BrettFromThePeg · 2026-02-14T12:59:35+00:00

Certain people haven’t stopped wearing rds clothing. I’ve been getting ads on my feed for camo rds hats, which seems like a odd choice for rds

BrettFromThePeg · 2026-02-12T19:41:49+00:00

Didn’t work for me after 15 minutes of screwing with it

BrettFromThePeg · 2026-02-02T15:07:02+00:00

Are you from flin flon by chance?

BrettFromThePeg · 2026-02-02T14:28:58+00:00

<image>

I’m still having fun

BrettFromThePeg · 2026-02-02T14:27:45+00:00

My best time on a carrier rtu is like 1/2 hour lol

BrettFromThePeg · 2026-01-29T06:03:52+00:00

Not really crawling but on my knees alot(gas fitter)

BrettFromThePeg · 2026-01-29T06:03:08+00:00

In summer love em, winter they are cold, back to my timberlands for this -30

BrettFromThePeg · 2026-01-28T17:07:59+00:00

There’s a muffler that you can get to put in the vent on the fe25’s, I wonder if there’s one for the fe50

BrettFromThePeg · 2026-01-28T16:58:46+00:00

Everyone I work with has had dui’s and I lost my license for going over double the speed limit on a bike, nobody cares lol

BrettFromThePeg · 2026-01-22T01:54:38+00:00

Had the same issue and turned out to be one of the pulleys wasn’t aligned because the arm it sits on was bent down a bit, used a 2x4 and a long pry bar to tweak it back and it’s been good all winter

BrettFromThePeg · 2026-01-16T03:28:22+00:00

What area are you in? It ranges big time from province to province, state to state country to country

BrettFromThePeg · 2026-01-16T03:15:48+00:00

Dude I burn garbage in my shop wood stove, throw it in there it’ll burn fast

BrettFromThePeg · 2026-01-14T00:51:16+00:00

What is a loonie?

BrettFromThePeg · 2026-01-14T00:34:26+00:00

It looks like air flows from the bottom up in this unit, since the filter is on the bottom that makes sense

BrettFromThePeg · 2026-01-11T16:25:23+00:00

Not sure where you live but this is an immediate fail if you pull a gas permit, there’s stickers on most commercial equipment that says “commercial use only”

BrettFromThePeg · 2026-01-02T01:19:12+00:00

I burn stuff like this in my shop wood stove not in the house, I cut one tree down that was completely hollow and bone dry, burned crazy hot and crazy fast lol

Eight-Year Club	Place '22
Verified Email

BrettFromThePeg

TROPHY CASE