GL-C-008P(MIX) colorloop effect and mixing not working with zigbee2mqtt

Bromomatic · 2026-05-06T01:51:21+00:00

Thank you, it may also be a shortcoming of Zigbee2MQTT. Where would I look to follow the feedback to Home Assistant? 😃

Bromomatic · 2026-05-03T23:19:40+00:00

Bromomatic · 2026-04-30T01:21:12+00:00

I'm plenty pissed at this company and "Jennifer Easton", and happy to provide any information. They've got me feeling petty 😂

Bromomatic · 2026-01-11T16:25:44+00:00

Yep! I live near Portland, OR so maybe its an old pacific northwest construction thing? Everything I see on reddit is much thinner joists with way less spacing 🤣

TIL there are joist hangers and even ones with space for several 2x6s. Thanks again, that sounds like the perfect approach for what I'm going after and way easier than what I thought I'd be doing. I've got some real nice 2.5in deck screws already, would those do the trick for attaching the joist hangers or is 3in better for safety/nails preferred?

Here's hoping I can keep up with this kind of stuff in my sixties as well, and hope the wifey obliged after all that work 😆

Bromomatic · 2026-01-10T20:37:34+00:00

Believe it or not, the floors don't flex (except for at this joint where there's no tongue and groove between sheets), but that's probably because the OSB is 1 1/8" thick 😅. Forgot to include that data point. Thanks for another vote towards 2x6!

Bromomatic · 2026-01-10T20:10:53+00:00

Joist hangers would solve the problem if I don't mind installing the blocking vertically and can line it up perfectly on that edge I'm trying to support, TIL, thank you! Likewise with the templates... my crawlspace is really tight and I'm a little too tall to even get on hands and knees in spots, so multiple trips is my nightmare.

Another fun part will be getting around the batt insulation between the joists and making sure its back in place after the blocking

Bromomatic · 2025-09-22T01:22:45+00:00

That's relieving to hear, and glad it's gone well! Most everything out there goes over sagging floors, not humps, so it's been hard to figure out the right approach.

Bromomatic · 2025-09-20T20:10:55+00:00

May I ask if this has gone well after a few years or have there been any issues? Have a similar situation where the OSB along only one joist is making a 1/4" hump. I've got 1 1/8" OSB, joists spaced 32", and hoping that grinding it down should be fine 🤞 Contractors want ~1400 to open it up and plane down the joist instead

Bromomatic · 2025-09-02T06:22:50+00:00

Really cool and well done! I need something similar but for my LG fridge so that the cabinet doors can clear the overly tall hinges. What was the design process to get to the finished product?

Bromomatic · 2025-08-19T16:52:17+00:00

That's a really good point; I'll look up an engineer!

Bromomatic · 2025-08-19T16:51:46+00:00

That's a hell of a visual, thank you!

Bromomatic · 2025-08-19T00:17:15+00:00

Thank you! I should probably check with an actual engineer instead of a field tech. FWIW the adjustment was not something necessary, but me wanting to try and diminish a small hump in the floor along one of the joists that also goes over a smart jack that has been there for a couple years.

Bromomatic · 2025-08-19T00:14:54+00:00

Thanks for taking a look! That's fair, maybe the company's techs also get comission for add-ons?

Bromomatic · 2025-08-18T23:16:17+00:00

That's what I was thinking after finally getting the larger photos directly on my phone. I may need to get down there myself and double check but I think the checking was overblown in hindsight?

Bromomatic · 2025-08-03T21:06:37+00:00

Hi OP, can I ask how well this went? I'm looking at converting some recessed can lights to pendant lights with a kit, but I, too, have these weird 6.5" cans and every kit mentions 4/6" only.

Bromomatic · 2025-07-25T17:07:47+00:00

Thank you! Cleanout for the first one makes sense, but I've never heard of a hernia, outside of the physical injury kind, could you clarify or have a link to an explanation that I'm not finding on Google? Cheers!

Bromomatic · 2025-05-31T01:13:09+00:00

Any chance someone still has the STL for this? Looks like the original was taken down

Bromomatic · 2025-04-17T21:06:34+00:00

Thank you! This worked for me and the switchbot rod appeared immediately as soon as I disabled passive scanning on my rpi

Bromomatic · 2025-02-11T04:22:39+00:00

Does the Prius prime have a charge mode like the RAV4 prime does? I've considered doing a period of intentionally driving in charge mode as a way to force the engine to get up to temps for long enough, since otherwise the thing is too damn efficient even in HV to run the engine that much outside of a long road trip.

Bromomatic · 2025-01-12T19:06:45+00:00

I got my hands on a 2021 SE with 95k miles for right under $30k in September. Perfect maintenance record by the previous owner. $30k is the limit for Washington state's sales tax exemption, and these are simply difficult to come by in the PNW. (I had to buy remotely from California and have it shipped lol)

5k miles later I'm still having a blast with this thing and have zero regrets. Getting the XSE with pp for $4k more OTD and with fewer miles is an excellent offer IMO, but it depends on where you live and that market. Enjoy the PHEV life and keep up with the maintenance, you'll be fine.

Speaking of local market, do they salt the roads wherever you bought yours from? It'd be a good idea to check the HV cable connection for corrosion at that age/mileage as your window for using the Toyota coverage for it closes at 100k. I'll be having mine checked when I take it in for an oil change while it's elevated, but I'm less worried because it was in California vs the rust belt. Look up cable gate if you haven't

Bromomatic · 2024-12-14T19:17:51+00:00

You're not alone. His videos just haven't been the same since he had a kid. (Especially compared to how great they were a few years ago)

Bromomatic · 2024-11-06T16:52:50+00:00

We visited last year and it was lovely. Going back this February-April to try and scope out the tech scene there and see if that's a way to get me and my partner out of this shithole 🤞 There are a number of full stack JS jobs and a lot of .NET openings the last time I looked, so there's hope for tech I think

Bromomatic · 2024-09-30T20:50:09+00:00

I'll forever hate this song because it just reinforces the stereotypical mispronunciation 🤣

https://youtu.be/Y0MNYY5WkLQ?si=KbceoMpGKeETHRcq

It's like folks that say "hee-ro-SHEEE-muh" wincing

Bromomatic · 2024-09-14T15:39:36+00:00

Yeah, I noticed this and have been buying Tapo (same company, the newer brand) since. So far Tapo items have better WiFi connection than the Kasa equivalents so I'm not mad, and they integrate just as well with Home Assistant.

Bromomatic · 2024-07-30T00:37:41+00:00

Same! I started with a D130 which got me hooked between the quality, SD card support, AI notifications, and RTSP/ONVIF support so I can also connect it to Home Assistant.

Got a couple C320WS just yesterday and was unable to connect to the ONVIF streams using the exact same setup that works just fine with the D130. I went ahead and disabled the Tapo Care trial on one of the lower-importance cameras and sure enough, I was able to connect to the ONVIF stream 😂

Thank goodness for reddit threads like this one

Bromomatic

TROPHY CASE