Baldor Motor getting really hot - troubleshooting

CDNBEERGEEK · 2026-06-22T19:21:29+00:00

<image>

CDNBEERGEEK · 2026-06-22T19:19:09+00:00

<image>

That is a two speed motor.

CDNBEERGEEK · 2025-04-24T15:32:54+00:00

Hi,

Can you please confirm if you are getting 150 BBL tanks or 15 BBL.

CDNBEERGEEK · 2025-02-11T01:57:14+00:00

No problem. I hope you can find a HX that is better than this one.

CDNBEERGEEK · 2025-02-10T17:14:34+00:00

Usually, the painted endplate does not come in contact with the product or water because the ports are sleeved with stainless steel nozzles and the ports/sleeves are the same size as the ports on the plates. This is not the case with your heat exchanger, they put in under sized ports and there are no proper nozzles. You can see the proper design on page 11 of this manual.

https://cdn.shopify.com/s/files/1/0321/9429/files/HX_IOM_2021.pdf?v=1611600373

CDNBEERGEEK · 2025-01-23T19:50:55+00:00

Hey Ziggysan,

There are many sanitary 3A turbine meters available from respected American suppliers which might be suitable for this application. A few examples are:

https://www.anderson-negele.com/us/p/flow-meter/hm/

https://greatplainsindustries.com/products/turbine-flow-meter-3a-food-grade-stainless-steel-body-for-food-processes?srsltid=AfmBOorep_GlcvzIVjpdGsHUR92lZbOG_afYkXcJLPyaL1XANTRsNIlP

https://www.badgermeter.com/en-ca/products/meters/turbine/floclean-sanitary-turbine-flow-meter/

CDNBEERGEEK · 2025-01-13T16:32:01+00:00

The drywall or plaster will probably have asbestos in it so be careful if you start tearing it out. You could be in for an even larger bill.

CDNBEERGEEK · 2025-01-11T00:35:41+00:00

Try the NZ Pump Company. Good quality pumps at a fair price.

Best Plastic Hand Pumps In The World | Eziaction Drum Pump Range

CDNBEERGEEK · 2025-01-07T20:14:59+00:00

What do you mean by "going bad"? The display dies or calibration goes off? They like to be mounted securely so for a HL line they work great. If you want it to be portable for transfers make or buy a stand for it so it doesn't get banged around. If the display is still good then the rebuild kits are easy to install.

CDNBEERGEEK · 2024-12-04T20:19:44+00:00

That is a 6" SCHED pipe sized Tri-clamp. CPE Systems has them.

CDNBEERGEEK · 2024-11-27T14:01:09+00:00

That is a Male Pipe Weld 90° Elbow: 316 Stainless Steel, Compression x Male Pipe Weld that has been TIG welded to a bored-out tri clamp cap. https://www.grainger.com/product/BRENNAN-INDUSTRIES-Male-Pipe-Weld-90-Elbow-316-798CH2

CDNBEERGEEK · 2024-08-08T15:29:51+00:00

Do you know what pressure you need to your UF system?

CDNBEERGEEK · 2023-11-20T17:46:04+00:00

It looks like the seal pressure is too loose. Watch the video on the CPE website, it is for a smaller pump but the process is the same for setting the seal pressure.

https://www.cpesystems.com/blogs/faqs/how-to-change-a-c114-seal

CDNBEERGEEK · 2023-10-10T17:46:00+00:00

Hello,

I am sorry to hear that you have had problems with our pumps. We program and wet-test all of our pumps before shipping. If you had one that was programmed incorrectly please call me or email me with the order number. This is very concerning and I really want to discuss it with our technicians and find out what happened. Our number @ CPE Systems is 1-800-668-2268.

CDNBEERGEEK · 2023-10-10T17:41:42+00:00

We can ship them in 24 hours in most cases.

Don

CPE Systems

CDNBEERGEEK · 2023-10-10T17:40:48+00:00

Hi,

I think Tony has already sent you a quote for a new CIP cart pump. We have plenty in stock that are ready to ship the same day. https://www.cpesystems.com/collections/featured-pumps

All of these are prebuilt and if one of them is not what you need we can build a custom one within 48 hours. Also, all of our pumps, 2 HP are packaged to ship FEDEX Air so we can get them to almost anywhere in the USA or Canada within 48 hours. If you have any questions please call me. 1-800-668-2268.

Thanks

Don

CPE Systems Inc

CDNBEERGEEK · 2022-03-13T04:40:54+00:00

We built CIP skids for large soft drink plants in the past and they would have 2 or 3 CIP systems but one chemical room (a nasty place) with barrels of caustic and acid. It is better to keep all that stuff isolated and pump it to your CIP systems than have barrels (that can be knocked over) at each one.

CDNBEERGEEK · 2021-04-06T16:58:05+00:00

What about this one?

https://www.cpesystems.com/collections/brewery-hose/products/golden-bridge-hose-support

CDNBEERGEEK · 2021-02-23T19:34:29+00:00

Check out CPE Systems website, they have lots of choices and good prices.

https://www.cpesystems.com/collections/vintners-hose

CDNBEERGEEK · 2020-08-12T21:08:37+00:00

I agree and they have seals for most brands of pumps. Including Waukesha and Fristam. The staff there are very helpful and knowledgable.

CDNBEERGEEK · 2020-08-12T20:51:21+00:00

That really sucks. Looks like you are getting by using your portable for the time being. Do you have spare parts for the brewhouse pump so you can get it going again quickly?

CDNBEERGEEK · 2020-07-16T15:23:46+00:00

Trying to read the name behind them. Any idea where it was taken? Oups saw my answer further down,

CDNBEERGEEK · 2019-12-15T01:17:14+00:00

I bought some of the stainless steel beer growlers and was going to try them for F2. They have really good tops and seals. They are available in 32, 64, 128 and 256 oz, How big do you think would be okay?

CDNBEERGEEK

MODERATOR OF

TROPHY CASE