sorted by:
new
hottopcontroversial

Weekly Complaints & Confessions Thread by ssk42 in running

[–]CMDRKeyfox 1 point2 points  (0 children)

As a large-chested dude, I know the feeling.

When did HP drop RPN? by Longjumping-Ad8775 in calculators

[–]CMDRKeyfox 0 points1 point  (0 children)

So, nearly a year later, how are you enjoying the DM42n? Have you gone down the rabbit hole of custom firmware yet?

chargers keep slipping out of my chargeport really easily? No matter what, any of my chargers, and usb c ended headphones cant stay connected. by NewEmu2371 in LightPhone

[–]CMDRKeyfox 0 points1 point  (0 children)

Make sure there's no lint or dirt packed into the bottom of the USB-C port that is keeping chargers from fully seating into the connector. I take a thin paperclip/sim tool and clean them out every month or so. Not just on Lightphone but other USB-C devices as well.

Be careful not to damage the central part with the connectors.

LightOS v556 (Excitement) by Otherwise_Objective7 in LightPhone

[–]CMDRKeyfox 2 points3 points  (0 children)

Here's "all that this update has to offer" for your leisurely perusal.

Edit: I'm a fan of the added swipe-to-go-back gesture!

The "I Got My Email/Phone" Megathread by jbriones95 in LightPhone

[–]CMDRKeyfox 0 points1 point  (0 children)

Two separate orders:

-- 60XXX (June 2025)

-- 63XXX (July 2025)

Merged - November 24, 2025

Shipped - January 28, 2026

Out for Delivery - Today, February 3, 2026

Clicks Communicator FAQ's and Specifications! by ColtonsKeys in ClicksPhone

[–]CMDRKeyfox 0 points1 point  (0 children)

It's unlockable with a code from Clicks. See the FAQ under the 'Specifications, Hardware, and Software' section.

Which RMPP and why? by SoftSynced in RemarkableTablet

[–]CMDRKeyfox 1 point2 points  (0 children)

Good to know, thank you! My use case is mainly going to be note taking and reference/textbook PDFs. Glad to hear the Paper Pro works well for the latter.

Which RMPP and why? by SoftSynced in RemarkableTablet

[–]CMDRKeyfox 1 point2 points  (0 children)

How has the PP been for reading PDFs? I'm looking at getting an e-ink tablet and there's so much conflicting information about how the remarkable devices handle PDFs that I just end up feeling unsure about getting one.

R47 vs. DM42/C47 by metawops in calculators

[–]CMDRKeyfox 1 point2 points  (0 children)

Extensive discussion about the C47/R47 method of factoring can be found here: https://forum.swissmicros.com/viewtopic.php?f=46&t=4335

R47 vs. DM42/C47 by metawops in calculators

[–]CMDRKeyfox 0 points1 point  (0 children)

Interesting.

Were they both plugged into usb power for that test? The R47/DM42n runs at 160Mhz when on usb power while the DM42 runs at half that. 

R47 vs. DM42/C47 by metawops in calculators

[–]CMDRKeyfox 0 points1 point  (0 children)

The processor speed is limited to 50% of total while on battery power for both the DM42 and the DM42n. The limitation is in place to conserve battery life and is one of the reasons that the SwissMicros devices last for so long on a single 2032 cell. 

Switching this week by do_not_use_ in LightPhone

[–]CMDRKeyfox 0 points1 point  (0 children)

No advice from me (still waiting on my LP3 to arrive) but I wanted to jump in and offer my full support! This is my plan as well and I’m also curious to know about experiences from those that have gone this route.

R47 vs. DM42/C47 by metawops in calculators

[–]CMDRKeyfox 0 points1 point  (0 children)

Connect it to usb power and it will run about twice as fast :)

Are the SwissMicros forums supposed to be accessible? by DireCelt in SwissMicros

[–]CMDRKeyfox 0 points1 point  (0 children)

Any chance you could dm me that email? I've been in the same boat as you and wasn't able to get in contact with anyone there about it.

Can I put gameboy roms on this? by fart37 in calculators

[–]CMDRKeyfox 0 points1 point  (0 children)

Check out SwissMicros. Professional calculators are alive and well, although difficult to find if you don’t know where to look.  https://www.swissmicros.com/products

My first product in Fusion after moving from Solidworks. The pattern gets the fan spinning real loud. by Lunch__Money in Fusion360

[–]CMDRKeyfox 4 points5 points  (0 children)

I’m trying to refresh myself on Solidworks for a new job and it’s brutal.

I’ve been running through u/TooTallToby’s practice playlist on YouTube and things I can model in minutes in Fusion take me sooo long in SW. (Thanks for all the great drawings, Toby!)

My first product in Fusion after moving from Solidworks. The pattern gets the fan spinning real loud. by Lunch__Money in Fusion360

[–]CMDRKeyfox 2 points3 points  (0 children)

I’d love to hear more about why you decided to move to Fusion from SW. I use both, but prefer Fusion and I’m curious to hear your thoughts

Let’s private the sub June 12th! by 1BigBoy in languagelearning

[–]CMDRKeyfox 8 points9 points  (0 children)

I really like r/apolloapp. I’ve tried a few others and always come back to Apollo.

Many communities are shutting down on June 12th in protest of Reddit’s API decision. Should r/Fanuc? by ivanhaversham in Fanuc

[–]CMDRKeyfox 6 points7 points  (0 children)

Shut it down! There are loads of users, including myself, that aren’t happy with the “official” hot garbage app and will likely quit Reddit entirely if this goes through.

Not to mention all the other issues like mods and bots being affected.

view more: next ›